10 Toddler Dog Pumpkin Cutouts

10 printable toddler dog pumpkin cutouts — ready to download, trace, and light up the porch.

1. Dachshund Pumpkin Stencil
A dachshund in profile fills this easy dog pumpkin stencil, its long low body, short front and back legs, small rounded head, and thin tail all rendered as a single clean silhouette. The entire dog shape is cut away as one open piece, so the lit jack-o-lantern casts a bright dachshund outline against the orange pumpkin wall. The tail tapers to a fine point at the top, so finish that cut last with a single smooth stroke rather than sawing back and forth, which can tear the thin tip.
See template →
2. Schnauzer Pumpkin Stencil
A side-profile schnauzer silhouette with a beard, bushy eyebrows, and perky ears stands as the main cut-through shape in this easy dog pumpkin stencil. A separate tail piece and a small heart cutout on the dog's side complete the design; the heart stays as solid pumpkin wall inside an open negative-space frame. The carved pumpkin shows the schnauzer in bold orange relief against a dark background. Cut the heart outline early while the pumpkin is still firm, since the thin wall forming the heart border is the most fragile element in the design.
See template →
3. Golden Retriever Pumpkin Stencil
A golden retriever's face looks straight out from this easy pumpkin stencil: wide floppy ears, a broad forehead, round eyes with small arched brows above them, a large nose, and a happy open mouth with tongue showing are all carved as pierce-throughs. The ears are the largest cut areas and frame the face with an even glow. When the pumpkin is lit, the dog's expression reads as warm and friendly. Carve the small eyebrow arches before removing the large ear sections, since the brows are thin and easy to lose once the nearby wall flexes.
See template →
4. Sitting Puppy Pumpkin Stencil
A round-eared puppy sits upright in simple silhouette on this dog pumpkin stencil, its floppy ears, chunky paws, and curled tail all reading as a single clean cutout against the glowing orange skin. The entire figure is pierced through so candlelight throws a bold dark-dog shape onto surrounding surfaces. Because the ear tips sit very close to the body, cut the space between left ear and head first to keep that bridge intact while the rest of the wall is still firm.
See template →
5. Playful Puppy Pumpkin Stencil
A playful puppy silhouette in a classic play-bow pose, with its rump raised, front paws stretched forward, tail curling up, and round head tilted down, is carved as a single solid cut-through shape. The whole dog reads as one open void so it blazes brightly against the uncut pumpkin surface. Because the tail curls away from the body and connects only at a narrow point near the haunches, cut the tail last after the main body is out to avoid accidentally snapping the thin bridge.
See template →
6. Dachshund Pumpkin Stencil
A plump dachshund puppy stands in profile in this dog pumpkin stencil, its low-slung long body, droopy ears, and upturned tail captured as a single solid silhouette cut entirely through the pumpkin wall. Lit from within, the whole shape glows as a warm, simple dog outline. Because the design is one unbroken cutout, start at the ear tip and work the blade continuously along the outline to avoid restarting cuts that could create visible notches in the smooth edge.
See template →
7. Cartoon Dog Face Pumpkin Stencil
A cartoon dog face looks straight out in this pumpkin stencil, with two floppy rounded ears, a pair of round nose dots, fur-tuft accents on the cheeks, a wide muzzle shape, and a dangling curved tongue all rendered as separate cut-through pieces against an open face background. The design reads as an expressive puppy portrait when candlelit. Cut the small cheek fur tufts and nostril dots first while the surrounding pumpkin wall is still firm, then open the larger ear and muzzle sections afterward.
See template →
8. Paw Print and Bone Pumpkin Stencil
A dog paw print stacked above a classic dog bone forms this two-element dog pumpkin stencil, with the paw showing one main pad and four oval toe pads, and the horizontal bone below featuring two knobbed ends and a straight shaft. Both shapes are carved as separate open silhouettes that glow on the finished jack-o-lantern, the paw sitting centered above the bone with a clear gap of skin between them. Cut the paw toe pads and main pad first, then carve the bone, so any flexing of the pumpkin wall during the lower cut does not disturb the already-removed paw above.
See template →
9. Dog Paw Print Pumpkin Stencil
Another large dog paw print with one wide main pad and four rounded toe pads arranged above it makes up this easy dog pumpkin stencil, very similar in composition to other paw designs but with slightly wider spacing between the pads and a broader main pad shape. All five elements are cut through as open shapes that glow when lit, the gaps between them forming the defining lines of the print. Carve the two center toe pads first rather than starting at the edges, since the inner cuts require more maneuvering room before the outer pieces are removed.
See template →
10. Dog Paw Print Pumpkin Stencil
A large dog paw print with one big main pad and four oval toe pads arranged above it fills this easy dog pumpkin stencil, all five shapes carved as separate open pieces that glow independently when lit. The pumpkin-skin gaps between the toe pads and the main pad are narrow but uniform, creating a clean, recognizable print. Cut the four toe pads first from top to bottom, then remove the large main pad last, since it is the biggest single cut and easier to control once the smaller surrounding shapes are already out.
See template →