Similar to This
View all stencils →About this stencil
A dog paw print stacked above a classic dog bone forms this two-element dog pumpkin stencil, with the paw showing one main pad and four oval toe pads, and the horizontal bone below featuring two knobbed ends and a straight shaft. Both shapes are carved as separate open silhouettes that glow on the finished jack-o-lantern, the paw sitting centered above the bone with a clear gap of skin between them. Cut the paw toe pads and main pad first, then carve the bone, so any flexing of the pumpkin wall during the lower cut does not disturb the already-removed paw above. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery tea lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery tea light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and tea light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Homemory LED Tea Lights
24-pack of battery-operated lights
Battery-operated, flickering lights for a candle-like glow inside your finished pumpkin.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
- Beginner-friendly
Dachshund Pumpkin Stencil
A dachshund in profile fills this easy dog pumpkin stencil, its long low body, short front and back legs, small rounded head, and thin tail all rendered as a single clean silhouette. The entire dog shape is cut away as one open piece, so the lit jack-o-lantern casts a bright dachshund outline against the orange pumpkin wall. The tail tapers to a fine point at the top, so finish that cut last with a single smooth stroke rather than sawing back and forth, which can tear the thin tip.
- Beginner-friendly
Schnauzer Pumpkin Stencil
A side-profile schnauzer silhouette with a beard, bushy eyebrows, and perky ears stands as the main cut-through shape in this easy dog pumpkin stencil. A separate tail piece and a small heart cutout on the dog's side complete the design; the heart stays as solid pumpkin wall inside an open negative-space frame. The carved pumpkin shows the schnauzer in bold orange relief against a dark background. Cut the heart outline early while the pumpkin is still firm, since the thin wall forming the heart border is the most fragile element in the design.
- Expert / Pro
Rottweiler Pumpkin Stencil
A close-up Rottweiler face looks straight ahead on this dog pumpkin stencil, with expressive round eyes, a broad nose with a spiral nostril, and a relaxed mouth with a hint of jowl. Dozens of irregular cut sections across the forehead, cheeks, and ears create the breed's tan-and-black coat markings, all bridged by thin solid pumpkin-wall lines. When lit, the face glows with warmth through every gap while the orange bridges read as fur texture. Cut all the small inner-face detail shapes first, especially the nostril spiral, before tackling any of the large outer sections that would otherwise loosen the wall.
- Beginner-friendly
Sitting Puppy Pumpkin Stencil
A round-eared puppy sits upright in simple silhouette on this dog pumpkin stencil, its floppy ears, chunky paws, and curled tail all reading as a single clean cutout against the glowing orange skin. The entire figure is pierced through so candlelight throws a bold dark-dog shape onto surrounding surfaces. Because the ear tips sit very close to the body, cut the space between left ear and head first to keep that bridge intact while the rest of the wall is still firm.
- Expert / Pro
Pomeranian Pumpkin Stencil
A Pomeranian's fluffy face fills this expert pumpkin stencil, with large irregular patch and blob cutouts radiating outward from a central face zone to create the breed's characteristic lion-mane ruff. The eyes, brow ridges, nose, and cheek fur are rendered as interlocking positive and negative shapes, with bold irregular fur sections throughout. Work from the central face outward, carving the eye and nose details first, then tackling the fur patch cutouts in sections to keep maximum support until the outermost edges are reached.
- Beginner-friendly
Dog Pooping Pumpkin Stencil
A squatting dog caught mid-business is the cheeky subject of this easy pumpkin stencil, showing a broad-shouldered dog in profile with its tail raised, haunches lowered, and a small pile on the ground in front. The main dog silhouette and the small pile are both pierced through as large open cut sections, while the connecting bridge between head and body forms the neck. Cut the small pile shape first to free that isolated section, then carve around the full dog body in one continuous pass for a clean silhouette.