The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
Full Silhouette Labubu PumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

Full Silhouette Labubu Pumpkin

A large hollow frame outlines the entire Labubu figure on this expert-level silhouette pumpkin, with the ears projecting from the top, arms at the sides, and feet anchoring the base. Shallow-backed shading on the belly and star accents adds dimension without piercing through, and small tooth bars connect across the mouth slot to keep the grin intact. Cut the outer frame silhouette first to establish the figure, then work inward to the face openings. Backlighting with a bright LED reveals the layered depth of the fur and belly details.

No ratings yet · Sign in to rate
labubufantasycartoontoycutesilhouettestar-accentfull-figure-silhouette

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Labubu and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

A large hollow frame is cut around the entire figure, ears at the top, arms at the sides, feet anchoring the base, so the whole character hangs dark inside the glow. Small tooth bars connect across the mouth slot to keep the grin intact, and belly and star accents are shallow-backed for a dim second layer.

From pumpkin to porch

  1. Pick a tall pumpkin and thin it

    The full figure needs vertical room, so choose a tall pumpkin and scrape the carving wall to about an inch. Mark the frame boundary before anything else.

  2. Transfer and mark supports

    Pin-transfer the whole figure and highlight the anchor points: ear tips to the top of the frame, arms to the sides, feet to the base. These are the only things holding the figure, so widen any that look thin.

  3. Open the frame

    Cut the hollow frame around the figure in small sections, leaving every anchor untouched. Work top to bottom so gravity never loads a half-freed section.

  4. Cut the face openings

    Open the empty eyes, nose, and the small mouth slots, preserving the connected tooth bars that bridge across the grin. Those bars are fragile; cut toward them, never away.

  5. Back the belly and stars

    Shave the belly patch, fur strokes, and star accents shallow from the front so they glow dimly inside the dark body. Test with a flashlight after every few strokes.

  6. Backlight it bright

    A bright LED behind the figure makes the frame blaze and reveals the layered belly detail. Photograph from straight on at dusk before the first frost softens the edges.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The entire figure, ears, arms, body, and feet, stays dark full-thickness rind.

  • Peel & shade

    Belly patch, star accents, and fur strokes are shallow backed to glow softly within the silhouette.

  • Cut through

    The large frame around the figure plus the eyes, nose, and mouth slots between the tooth bars are fully open.

Learn the carving basics

Before you start cutting

How does the figure stay attached inside such a big opening?

Five planned anchors do the work: both ear tips at the top, both arms at the sides, and the feet at the base. Keep each at least an inch wide and the figure is surprisingly rigid; lose one and the whole carve is at risk.

What are the tooth bars and why do they matter?

They are thin bridges of rind left connected across the mouth slot, reading as the character's teeth. Cut the slots between them with a fine blade and support the wall with your other hand from inside.

Is this design achievable for an intermediate carver?

It is a stretch but a teachable one. The frame cutting is patient rather than difficult; the tooth bars and shallow star relief are where expert control shows. Practice the relief depth on the back of the pumpkin first.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.