The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
The Tung Tung Tung Sahur Bat pumpkin carvingAI
0

Report this carving

Tell us what is wrong. Reports are private.

The Tung Tung Tung Sahur Bat

This intermediate Tung Tung Tung Sahur pumpkin carving adds a large baseball bat silhouette and three rectangular bottom slots to the hollow eyes and mouth of the meme character, while log body and grain grooves stay as shallow backed detail. Cut the large bat silhouette before the face openings so you can judge how much rind the bat removal takes away from the overall structure. The three lower slots frame the base nicely and add extra light output when the pumpkin is lit from inside.

No ratings yet · Sign in to rate
tung-tung-tung-sahurfantasymemebrainrotcartoonfunnysilhouettebaseball-bat

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Tung Tung Tung Sahur and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The design combines face apertures with a large bat silhouette cut and three rectangular base slots for extra light, all while log body and woodgrain grooves stay as shallow backed texture. Cutting the large bat silhouette first lets you gauge how much wall area it consumes before the face openings reduce structural stability further. Three evenly spaced lower slots at the base frame the bottom and spread the glow across the whole front face.

From pumpkin to porch

  1. Gut and map the layout

    Remove a back panel, scoop to consistent 1-inch walls, then sketch the full design on the front with a dry-erase marker. Mark the bat silhouette, face elements, log body boundary, and three base slots so you can see spacing before picking up a saw.

  2. Score the log outline and woodgrain

    Use a linoleum cutter to score the log body border and horizontal grain lines into the skin only. These grooves add character texture and will catch LED light as faint relief lines. Keep depth consistent at about 1/8 inch.

  3. Cut the baseball bat silhouette first

    Pierce inside the bat outline and work the saw around the full shape. This is the largest single opening in the design, so cutting it before the face lets you confirm the pumpkin wall stays solid elsewhere. Extract the piece carefully and trim rough edges.

  4. Open the eyes and mouth

    Cut the hollow eye shapes and mouth opening using a thin-bladed saw. Leave rind bridges between all face elements and the bat area to maintain structural integrity. Work slowly through any curved sections.

  5. Cut the three base slots

    Cut the three rectangular slots across the lower face, spacing them evenly with intact rind between each one. Keep the bars between slots at least half an inch wide to prevent cracking. These slots add a decorative frame and spread light nicely across the base when lit.

  6. Insert LED and check the glow

    Place a bright LED inside through the back panel. Verify the bat silhouette, face, and base slots all read clearly. The woodgrain relief lines should show as subtle texture in the glow. Adjust the LED position to balance brightness across all openings.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The log body fill, surrounding rind, and woodgrain skin stay solid and dark.

  • Peel & shade

    The shallow-scored log outline and grain grooves glow faintly as low-contrast texture lines.

  • Cut through

    The bat silhouette, hollow eyes, mouth, and three base slots cut fully through for bright output.

Learn the carving basics

Before you start cutting

The bat shape has a long narrow handle. How do I keep it from snapping?

Cut the wide barrel end of the bat first, then work toward the handle. Keep the handle connection to the surrounding rind as a bridge rather than a completely isolated cutout if the handle is especially thin. A thin handle completely free-floating in a large opening will be fragile, so leaving a tiny connecting tab at the tip is a practical compromise.

How far apart should the three base slots be?

Aim for equal gaps between slots and equal rind bars between them. Measuring and marking all three slots with a marker before cutting helps ensure even spacing. Each rind bar should be at least half an inch wide so it does not crack under the weight of the pumpkin wall above.

Will the woodgrain scoring show once the pumpkin is lit indoors?

Yes, especially in a dimmer room. The thinned skin transmits a softer amber glow that contrasts nicely with the bright cut openings. Keep your scoring depth consistent across all grain lines so the glow reads as an even texture rather than scattered bright spots.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.