The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
@ai_concepts
Sep 25, 2026
Tung Tung Tung Sahur Bat PumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

Tung Tung Tung Sahur Bat Pumpkin

This easy Tung Tung Tung Sahur pumpkin carving features hollow eyes and a simple smiling mouth cut into a scored log-shaped outline, with a small flying bat accent scored into the shell beside it. Score the log outline first so you can see the character proportions before committing to the face cuts. The bat detail is a shallow score only, not a through-cut, so work it lightly with a linoleum tool after the face is done. A single tea light makes the grin glow while the bat stays visible as a soft shadow.

No ratings yet · Sign in to rate
EasyFantasyFunnyClassic Cutout
tung-tung-tung-sahurfantasymemebrainrotcartoonfunnyeasybat-accent

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Tung Tung Tung Sahur and all related characters, names, logos, and trademarks are the property of their respective owners. This is an unofficial fan carving shared by our community for inspiration only. PumpkinCarvingIdeas.com is not affiliated with, sponsored by, or endorsed by any rights holder or person depicted, and no such connection is implied.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The design uses a scored log outline to set character proportions before any through-cuts are made, keeping orientation clear throughout the session. Hollow eyes and a smiling mouth provide the main glowing apertures, while a shallow-scored flying bat beside the figure stays as a soft shadowed detail. One LED tea light placed inside makes the grin pop while the bat remains visible as a dim relief shape.

From pumpkin to porch

  1. Prep and gut the pumpkin

    Cut a back-panel lid rather than a top lid so the opening stays hidden when displayed. Scoop the interior down to about 1 inch of wall thickness throughout. Thinner walls are easier to score but crack faster, so aim for consistency.

  2. Score the log outline

    Use a linoleum cutter or narrow paring knife to trace the log body shape into the rind skin only, not through to the flesh. This gives you a clear border for the character before committing to any cuts. Stand back and verify the proportions look right.

  3. Cut the hollow eyes

    Pierce through the rind inside both eye marks with a small pumpkin saw. Cut along each eye boundary in smooth strokes, keeping corners slightly rounded to prevent tearing. Pop the cut piece out from inside and clean the edges with a craft knife.

  4. Cut the smiling mouth

    Work the mouth opening the same way, cutting big shapes last per safe carving practice. Leave adequate rind between the eyes and mouth so the face area stays rigid. Remove the piece cleanly and smooth any rough edges.

  5. Shallow-score the bat accent

    Using a linoleum tool, lightly score the flying bat shape into the rind beside the log figure, removing only the orange skin layer. Do not push through to the flesh. Carve slow, deliberate strokes and keep the bat's wing tips connected to avoid fragile free-floating points.

  6. Light and display

    Insert an LED tea light through the back panel and position it toward the face side. The glowing eyes and smile will be bright, while the scored bat shows as a softer glowing shadow. Check the display angle so both the face and bat are visible to viewers.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    The log body outline, the surrounding rind, and the scored bat wing surfaces stay dark and unlit.

  • Peel & shade

    The shallow-scored bat accent glows dimly as a soft amber shadow through the thinned rind.

  • Cut through

    The hollow eyes and smiling mouth cut fully through for bright warm light.

Learn the carving basics

Before you start cutting

How deep should the log outline score be?

Aim to remove only the orange skin layer, about 1/8 inch deep. You are creating a visible surface texture, not a structural cut. If you accidentally go through to the flesh, the area will glow faintly, which can look unintentional, so work slowly with a sharp narrow tool.

Will the bat detail still show up once the pumpkin is lit?

Yes, a shallow score glows noticeably softer than a full cut, so the bat reads as a dim warm shape contrasting with the bright eyes and mouth. Position the LED slightly forward and low inside to throw the most light toward the face while still back-lighting the bat.

My mouth corners keep cracking during the cut. What should I do?

Start your saw entry at the center of each straight or curved segment and work toward the corners rather than sawing into corners directly. Corners crack because the blade turns abruptly. Small, controlled turns prevent the rind from splitting, and you can clean stray cracks with a tiny dab of toothpick-applied petroleum jelly to slow oxidation.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.