Similar pumpkin stencils
View all stencils βAbout this stencil
This free Loyal Lab pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A lovable Labrador face with two glowing floppy ears, round eyes, a rounded triangle nose, and an open smiling muzzle beneath. The big ear panels and the mouth cut fully through, while narrow skin bridges separate the nose from the jowl lines. A medium carve thanks to those bridges; cut the small eye and nose openings before the large ears so the face area keeps its strength while you work. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 55-80 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 55-80 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the floppy ear openings. Cut both regions marked 1. Preserve their broad upper curves, narrow inward edges and rounded lower tips. Keep each ear separate from the small eye beside it.
- Open the small upright eyes. Cut both regions marked 2 along the unequal narrow ovals. Preserve the wide center bridge and the strips of shell surrounding both eyes.
- Cut the connected muzzle. Cut region 3 as one opening containing the inverted triangle nose, short central neck and two curved mouth lobes. Follow both upward outer ends, leaving the white cheek areas attached above them. Support the plug at the narrow connecting neck.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediatePuddles the Puppy Pumpkin Stencil
A sweet puppy face fills the pumpkin: two long floppy ears drooping down the sides, small round eyes, a rounded nose, and a short curved smile beneath it. The ears, eyes, nose, and mouth are all cut through, so the whole dog glows warmly after dark. Rated medium mainly for the large ear openings; leave a generous strip of wall between each ear and the eyes so the face stays sturdy.
IntermediateBiscuit the Pup Pumpkin Stencil
An adorable puppy face with two long floppy ears hanging down the sides, big round eyes, a small triangle nose, and a happy curled smile. Each feature is cut fully through, so the whole face beams once it is lit. The ears are the largest openings and the curled smile ends are the finest cuts; start with the small mouth curls while the pumpkin wall is still rigid, then open up the big ear shapes last.
Beginner-friendlyDreaming of Bones Pumpkin Stencil
A patient pup sits in profile, ears perked and tail resting, while a bone floats nearby with a trail of small dream-bubble dots connecting them. The dog's body, the bone, and the dots are all cut fully through as bold, separate openings, so the scene reads instantly from the street. This easy design has no fragile interior bridges; just cut the large dog body in two or three sections and pop the bone and dots out last for a tidy finish.
IntermediateTreats and Tracks Pumpkin Stencil
A large dog bone glows across the lower face of the pumpkin with two paw prints stamped above it, each paw built from a rounded pad and four little toes. All pieces are cut fully through, so the bone and paws shine like a porch sign for the neighborhood's favorite dog. A gentle medium carve; punch out the sixteen small toe and pad holes first, then saw the bone in halves, meeting in the middle.
IntermediateThe Happy Frenchie Pumpkin Stencil
An adorable French bulldog face with the breed's signature upright bat ears glowing at the top, round eyes, a button nose, and a tidy mustache-like muzzle with a small mouth below. The ears, eyes, nose, and muzzle are pierced openings while the skin between them shapes the flat Frenchie face. At medium difficulty the big ear panels are easy, but take care around the narrow gap between the nose and mouth so the bridge stays intact.
IntermediateDog Bone & Four Paw Prints
A chunky dog bone sits at the center with four paw prints scattered around it, one near each corner. Instead of cutting through, you peel away just the orange skin inside each shape so the bone and paws glow as smooth pale panels against the untouched rind. A medium shading pattern that forgives wobbles; score each outline first, then lift the skin in shallow strips with a peeler or gouge.





