Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Playful Harbor Seal pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A playful harbor seal reclines with its head up, whiskers spread, and tail flippers raised in a happy curl. Everything is done with skin shaving rather than pierced cuts, so the seal's body emerges in pale relief with darker skin left for the eyes, nose, and whisker dots. It rates hard because of the fine facial detail; use a small gouge for the whisker spots and shave the body in smooth, even layers. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Estimated time: 2-3 hours. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Trace the seal and whiskers. Scrape all gray areas shallowly. Follow the round forward-facing head, two front flippers and raised forked tail on the right. Keep the white eyes, nose, mouth and muzzle dots intact. The eight narrow whiskers are shallow and unnumbered.
- Round the body and flippers. Deepen the broad dark-gray head and body marked 2, the large front flipper marked 2 and the unnumbered small left flipper. Leave the muzzle pads, whiskers, forked tail and pale silhouette rim shallow. Check the glow with an LED; keep the wall intact.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedSeaside Pup Pumpkin Stencil
A seal pup arches upward with its nose in the air, whiskers fanned, and tail flippers curled at the base of the design. It is carved entirely in continuous-wall shading, with the body shaved smooth and details like the eye, whiskers, and flipper creases etched as darker lines left in relief. Rated hard because of those layered depths, so establish the full body at one shallow depth first, then return with a smaller gouge to deepen the belly and neck curves gradually.
AdvancedBubbly Narwhal Pumpkin Stencil
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
AdvancedHappy Trails Snail Pumpkin Stencil
A grinning cartoon snail with a big spiral shell, a smiling face, and two ball-tipped eye stalks glows warmly from the pumpkin front. The design is shaved rather than pierced, with narrow ridges of skin left in place to define the spiral bands, body curve, and happy face. It earns its hard rating from those thin dividing ridges; shave the spiral from the center outward and keep your blade shallow so the ribs survive.
Expert / ProHarbor Moonbather Pumpkin Stencil
A harbor seal rests on the shore with its head raised and tail curled up, backed by a huge full moon, drifting clouds, and bands of rippling water below. The entire scene is skin-shaved shading with no pierced holes, so the moon glows brightest behind the seal's darker sculpted body. Expert carvers should establish the moon's deep, even shave first, then build the seal with shallower graded layers so its whiskered face keeps crisp contrast.
IntermediateSweetheart Smile Pumpkin Stencil
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
IntermediatePenguin Strut Pumpkin Stencil
A plump penguin stands in profile with its beak raised, and the design is built entirely from skin shading rather than pierced cuts. You shave away the rind across the penguin's white belly and face for a bright glow, leave the darker back and flipper as untouched skin, and etch a fine outline around the whole bird. For this medium etch, remove the belly in shallow, even layers and stop as soon as light glows through at test lighting.





