Similar to This
View all stencils →About this stencil
A harbor seal rests on the shore with its head raised and tail curled up, backed by a huge full moon, drifting clouds, and bands of rippling water below. The entire scene is skin-shaved shading with no pierced holes, so the moon glows brightest behind the seal's darker sculpted body. Expert carvers should establish the moon's deep, even shave first, then build the seal with shallower graded layers so its whiskered face keeps crisp contrast. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateSmiling Sea Turtle
A smiling sea turtle paddles across the pumpkin, its patterned shell divided into glowing plates while thin ribbons of skin stay in place to draw the head, flippers, and shell segments. This is a shading-style design carved on a continuous wall, so you shave away the skin rather than piercing holes, letting the whole turtle glow softly. Shave in thin layers and test with a light often until the flippers and shell panels shine evenly.
AdvancedPlayful Harbor Seal
A playful harbor seal reclines with its head up, whiskers spread, and tail flippers raised in a happy curl. Everything is done with skin shaving rather than pierced cuts, so the seal's body emerges in pale relief with darker skin left for the eyes, nose, and whisker dots. It rates hard because of the fine facial detail; use a small gouge for the whisker spots and shave the body in smooth, even layers.
AdvancedUpturned Seal Pup
A seal pup arches upward with its nose in the air, whiskers fanned, and tail flippers curled at the base of the design. It is carved entirely in continuous-wall shading, with the body shaved smooth and details like the eye, whiskers, and flipper creases etched as darker lines left in relief. Rated hard because of those layered depths, so establish the full body at one shallow depth first, then return with a smaller gouge to deepen the belly and neck curves gradually.
AdvancedNarwhal, Seven Bubbles & Waves
A chubby, smiling narwhal swims among seven round bubbles with stylized waves rolling beneath its tail. Nothing is pierced; the whole design is shaved into the skin so the pale narwhal body, spiral tusk, bubbles, and wave curls stand out against the untouched rind. For this hard shading project, remove skin in shallow, even layers and keep a consistent depth across the body so the narwhal glows uniformly when lit.
AdvancedCheerful Snail & Spiral Shell
A grinning cartoon snail with a big spiral shell, a smiling face, and two ball-tipped eye stalks glows warmly from the pumpkin front. The design is shaved rather than pierced, with narrow ridges of skin left in place to define the spiral bands, body curve, and happy face. It earns its hard rating from those thin dividing ridges; shave the spiral from the center outward and keep your blade shallow so the ribs survive.
IntermediateWoolly Alpaca & Long Neck
A woolly alpaca stands in profile with its long neck raised, its whole fluffy body rendered as one shaved shape with a sweet stippled face. This is a continuous-wall design: peel away just the skin inside the alpaca outline so the pale flesh reads as its fleecy coat, with no pierced holes. Use a small loop tool for the tight fur texture around the head, and work in thin layers so you never break through.