Similar to This
View all stencils →About this stencil
A vintage sugar-skull-style face packed with detail: huge round eyes crossed by curved bars, arching brow flourishes, a diamond nose, ten scalloped tooth slots in a wide grin, and comma-shaped swirls framing the cheeks. Everything is cut through, with slim rind bridges holding the eye bars and tooth dividers in place. As an expert pattern, treat those bridges as sacred; cut away from them, never toward them, and remove waste in small pieces. This design is rated Expert / Pro and takes most carvers around 240 minutes from trace to glow. Sculpting-grade work. Three or more depth layers, fine detail.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the four curved brows. Cut all four regions marked 1. Preserve the two stacked arches above each eye and all white separators.
- Keep the two tall eye bars. Cut all four panels marked 2. Leave both vertical eye bars attached at their upper and lower ends. Follow the unequal round contours.
- Add the nose and ornaments. Cut all thirty-five regions marked 3: the notched spear nose, sixteen diamonds, eight side leaves and ten curved accents beneath the eyes and grin. Preserve every separate white gap.
- Open the ten grin slots. Cut all ten regions marked 4. Keep the tall white ribs between them intact. Follow the rising outer corners and the two large rounded center openings.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a expert / pro carve like this you'll want a full ribbon tool set, clay sculpting loops, x-acto knife, and dremel (optional). Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedVintage Arches and Round Grin
Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.
IntermediateArched Eyes and Six Freckles
A vintage-style pumpkin face with tall arched eyes, a triangle nose, a gap-toothed smile, and six little freckle holes dotted across the cheeks. The eyes, nose, mouth, and freckles all cut through, and each eye keeps a rooted pupil tab attached at the bottom for old-fashioned character. Drill or poke the freckles first with a small round tool, and cut toward each pupil tab's base so those thin anchors survive.
Beginner-friendlyTwin Crescent Eyes and Smile
This vintage-style face uses two curved crescent eyes that seem to squint with delight, a small triangle nose, and a broad smile interrupted by one chunky hanging tooth. Every shape cuts fully through the wall, and the pieces are large enough that a keyhole saw handles them easily. Cut the inner curve of each crescent first so the thin points at the tips release cleanly without tearing.
Expert / ProSleeping Moon and Star Scrolls
A serene sleeping crescent moon with a sculpted profile face rests beside a bold five-point star, the pair wrapped in curling scrollwork flourishes and tiny accent stars. Everything is continuous-wall relief, shaved to different depths with no pierced holes, giving it an heirloom carved-wood look. An expert project; keep the moon's facial features shallow and rounded, saving your deepest cuts for the background around the scrolls.
Expert / ProMoon Profile and One Star
A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.
IntermediateFive Stars Around a Crescent
A crescent moon anchors one side while five stars and a scattering of small round dot holes twinkle across the rest of the pumpkin like a busy night sky. Every element is cut through, and the pattern wraps wide, which suits a bumpy or warty pumpkin beautifully. The medium rating comes from the sheer count of pieces, so drill or punch the little dots first as reference points, then carve the stars and finish with the big crescent.