Free Dog Pumpkin Printables
Looking for free dog pumpkin printables? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.
Preview the design and choose one that matches your carving experience.
Dachshund Pumpkin Stencil
A dachshund in profile fills this easy dog pumpkin stencil, its long low body, short front and back legs, small rounded head, and thin tail all rendered as a single clean silhouette. The entire dog shape is cut away as one open piece, so the lit jack-o-lantern casts a bright dachshund outline against the orange pumpkin wall. The tail tapers to a fine point at the top, so finish that cut last with a single smooth stroke rather than sawing back and forth, which can tear the thin tip.
Schnauzer Pumpkin Stencil
A side-profile schnauzer silhouette with a beard, bushy eyebrows, and perky ears stands as the main cut-through shape in this easy dog pumpkin stencil. A separate tail piece and a small heart cutout on the dog's side complete the design; the heart stays as solid pumpkin wall inside an open negative-space frame. The carved pumpkin shows the schnauzer in bold orange relief against a dark background. Cut the heart outline early while the pumpkin is still firm, since the thin wall forming the heart border is the most fragile element in the design.
Rottweiler Pumpkin Stencil
A close-up Rottweiler face looks straight ahead on this dog pumpkin stencil, with expressive round eyes, a broad nose with a spiral nostril, and a relaxed mouth with a hint of jowl. Dozens of irregular cut sections across the forehead, cheeks, and ears create the breed's tan-and-black coat markings, all bridged by thin solid pumpkin-wall lines. When lit, the face glows with warmth through every gap while the orange bridges read as fur texture. Cut all the small inner-face detail shapes first, especially the nostril spiral, before tackling any of the large outer sections that would otherwise loosen the wall.
Sitting Puppy Pumpkin Stencil
A round-eared puppy sits upright in simple silhouette on this dog pumpkin stencil, its floppy ears, chunky paws, and curled tail all reading as a single clean cutout against the glowing orange skin. The entire figure is pierced through so candlelight throws a bold dark-dog shape onto surrounding surfaces. Because the ear tips sit very close to the body, cut the space between left ear and head first to keep that bridge intact while the rest of the wall is still firm.
Pomeranian Pumpkin Stencil
A Pomeranian's fluffy face fills this expert pumpkin stencil, with large irregular patch and blob cutouts radiating outward from a central face zone to create the breed's characteristic lion-mane ruff. The eyes, brow ridges, nose, and cheek fur are rendered as interlocking positive and negative shapes, with bold irregular fur sections throughout. Work from the central face outward, carving the eye and nose details first, then tackling the fur patch cutouts in sections to keep maximum support until the outermost edges are reached.
Dog Pooping Pumpkin Stencil
A squatting dog caught mid-business is the cheeky subject of this easy pumpkin stencil, showing a broad-shouldered dog in profile with its tail raised, haunches lowered, and a small pile on the ground in front. The main dog silhouette and the small pile are both pierced through as large open cut sections, while the connecting bridge between head and body forms the neck. Cut the small pile shape first to free that isolated section, then carve around the full dog body in one continuous pass for a clean silhouette.
French Bulldog Pumpkin Stencil
A front-facing French Bulldog puppy sits with large upright ears, wide cartoon eyes with round pupils, a flat pushed-in nose, spot-marked cheeks with tiny freckle dots, and chunky paws crossed at the bottom in this dog pumpkin stencil. The cut-away areas around the ears, inside the eyes, and across the chest give the glowing jack-o-lantern a strong portrait effect with plenty of warm orange pumpkin skin defining the Frenchie's wrinkled face. Carve the freckle dots and pupil circles before the ear openings so the delicate face detail is cut while the surrounding skin is at its firmest.
German Shepherd Pumpkin Stencil
A German Shepherd in a proud alert stance fills this pumpkin stencil as a single clean silhouette: erect pointed ears, a strong muzzle, a deep chest, and a slightly tucked hindquarter all captured in an unbroken outline with no interior cut-outs. When carved, the whole dog shape is one large pierced-through opening that glows as a pure bright silhouette against the dark night. Because the design has no internal bridges to worry about, trace the outline slowly and keep the cut continuous, paying extra attention to the sharp ear tips and the fine fur texture along the belly line, which can tear if the blade catches.
Dachshund Pumpkin Stencil
A plump dachshund puppy stands in profile in this dog pumpkin stencil, its low-slung long body, droopy ears, and upturned tail captured as a single solid silhouette cut entirely through the pumpkin wall. Lit from within, the whole shape glows as a warm, simple dog outline. Because the design is one unbroken cutout, start at the ear tip and work the blade continuously along the outline to avoid restarting cuts that could create visible notches in the smooth edge.
Cartoon Dog Face Pumpkin Stencil
A cartoon dog face looks straight out in this pumpkin stencil, with two floppy rounded ears, a pair of round nose dots, fur-tuft accents on the cheeks, a wide muzzle shape, and a dangling curved tongue all rendered as separate cut-through pieces against an open face background. The design reads as an expressive puppy portrait when candlelit. Cut the small cheek fur tufts and nostril dots first while the surrounding pumpkin wall is still firm, then open the larger ear and muzzle sections afterward.
Dog Paw Print Pumpkin Stencil
A large dog paw print with one big main pad and four oval toe pads arranged above it fills this easy dog pumpkin stencil, all five shapes carved as separate open pieces that glow independently when lit. The pumpkin-skin gaps between the toe pads and the main pad are narrow but uniform, creating a clean, recognizable print. Cut the four toe pads first from top to bottom, then remove the large main pad last, since it is the biggest single cut and easier to control once the smaller surrounding shapes are already out.
French Bulldog Pumpkin Stencil
A French Bulldog face stares straight out in this hard dog pumpkin stencil, its large upright bat ears, flat wrinkled muzzle, deep-set eye hollows, pushed-in nose, and jowl folds all captured as a continuous linework design with the open channels carved through and the skin ridges left intact. The ears are wide and open, connecting to the head via two curving lines that form thin bridges at the ear base. Carve the interior face details, including the eye hollows, nose curl, and jowl lines, before cutting the outer ear outlines, so the head stays rigidly attached while you work the delicate inner linework.
Paw Print and Bone Pumpkin Stencil
A dog paw print stacked above a classic dog bone forms this two-element dog pumpkin stencil, with the paw showing one main pad and four oval toe pads, and the horizontal bone below featuring two knobbed ends and a straight shaft. Both shapes are carved as separate open silhouettes that glow on the finished jack-o-lantern, the paw sitting centered above the bone with a clear gap of skin between them. Cut the paw toe pads and main pad first, then carve the bone, so any flexing of the pumpkin wall during the lower cut does not disturb the already-removed paw above.
Dog Paw Print Pumpkin Stencil
Another large dog paw print with one wide main pad and four rounded toe pads arranged above it makes up this easy dog pumpkin stencil, very similar in composition to other paw designs but with slightly wider spacing between the pads and a broader main pad shape. All five elements are cut through as open shapes that glow when lit, the gaps between them forming the defining lines of the print. Carve the two center toe pads first rather than starting at the edges, since the inner cuts require more maneuvering room before the outer pieces are removed.
English Bulldog Pumpkin Stencil
A stocky English bulldog puppy sits front-facing in this detailed dog pumpkin stencil, its wrinkled forehead, round cheek pouches, upturned nose, and splayed paws all rendered in interlocking cut sections. Large open areas in the chest and outer body frame a web of narrow pumpkin-skin bridges that define the jowls and snout; lit from inside, those bridges glow amber against the dark recesses. Work the tiny nostril dots and cheek-spot circles first with a small drill bit or punch, then carve outward to avoid collapsing those delicate interior pieces.
Frequently asked
- How do I transfer the pumpkin printable to my pumpkin?
- Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.
- How long do these pumpkin printables take?
- Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.
- What size pumpkin works best for free dog pumpkin printables?
- A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin printables. Larger pumpkins make detailed cuts easier.