10 Last Minute Classic Pumpkin Patterns

We curated 10 of the very best last minute classic pumpkin patterns so you can pick one and start carving in minutes.

1. One Tooth Jack-o-Lantern Pumpkin Stencil
This jack-o-lantern face pumpkin stencil keeps it deliberately minimal: two teardrop eye shapes each with a crescent notch cut from the bottom to suggest a raised brow, a small triangular nose, and a wide grinning mouth with one single center tooth left intact at the top lip. All four openings are pierced so they glow together, and the lone tooth bridging the smile is the only delicate detail in the whole design. Cut the single tooth gap on either side of that center tooth in two careful inward strokes, meeting cleanly at the base so it does not detach.
See template →
2. Smiley Face Pumpkin Stencil
A classic smiley face fills this easy pumpkin stencil: a broken circle made of twelve short arc segments forms the head outline, two tall oval eyes sit in the upper face, and a wide curved smile with rounded upturn ends completes the expression, all cut through as open negative space. The twelve dash segments that form the outer circle are separated by small uncut gaps, creating a dotted-ring effect when lit. Carve the outer arc segments first to define the circle, then cut the eyes and smile; the uncut gaps between segments are intentional and should be left untouched.
See template →
3. Jack-o-Lantern Face Pumpkin Stencil
This cheerful pumpkin stencil depicts a pumpkin-within-a-pumpkin: a wide jack-o-lantern face with a curling stem at top, four vertical rib lines crossing the body, and a grinning mouth with curling lip ends and individual tooth segments, all cut as negative space on the outer pumpkin. The vertical rib lines are the thinnest elements, each only a slim channel of open space; carve them with a single guided stroke from stem to mouth to avoid a wavy line. A warm candle light inside makes the rib lines read as glowing stripes across the face.
See template →
4. Vampire Jack-o-Lantern Pumpkin Stencil
A classic jack-o-lantern face with a vampire twist fills this pumpkin stencil: arched brows made of two angular patches over each eye, two large irregular triangular eye openings, a small v-shaped nose cutout, and a wide gaping mouth with jagged upper fangs and a rounded lower lip. All features are separate pierced-through shapes, so the candle-lit face shows glowing eyes, nose, and teeth against the solid orange pumpkin skin. Cut the small v-shaped nose notch and the two narrow eyebrow patches first so you can use the surrounding wall for leverage when carving the larger mouth and eye shapes.
See template →
5. Jack-o-Lantern with Glasses Pumpkin Stencil
A classic jack-o-lantern face wearing oversized rectangular glasses makes up this beginner pumpkin stencil. The eyebrow is a wide arched strip across the top, the glasses frame is a connected pair of rectangular loops each containing a circular lens opening, a triangular nose sits below, and a broad grinning mouth with one dripping fang dominates the lower half. The thick glasses frame and face outlines remain solid while the lens circles, nose triangle, and mouth are cut through. Cut the two circular lens openings inside the glasses before the wide mouth, so the frame bridge between the lenses stays firm.
See template →
6. Witch Hat Jack-o-Lantern Pumpkin Stencil
A grinning jack-o-lantern face wearing a small pointed witch hat sits at the center of this easy funny pumpkin stencil. The face features two large crescent-shaped eyes with small round highlight dots inside each, a triangular nose, a wide upward-curving mouth with a center tooth drip, and wispy curl accents at the cheek corners. The hat brim and crown are solid while the eye crescents, nose, and mouth are cut through. Carve the two small round eye-highlight dots before removing the larger crescent eye shapes so those tiny circles stay intact and the eye reads with dimension when lit.
See template →
7. Dracula Pumpkin Stencil
This easy vampire pumpkin stencil shows a classic jack-o-lantern face with two arched, angry eyes sporting jagged inner cuts, a small triangular nose, and a wide curved mouth lined with sharp teeth including prominent fangs at each corner. All the facial elements are carved through as open voids, leaving the surrounding face solid. The wide-open mouth is the largest single cut; take it in two or three sections, pausing at each tooth point, to keep the thin tooth tips from snapping off.
See template →
8. Friendly Jack-o-Lantern Pumpkin Stencil
Two rounded horseshoe-arch eyes, each with a small bump notched from the bottom to suggest eyebrows, and a broad curved mouth split by two square bottom teeth define this easy pumpkin stencil. The asymmetry between the left eye (fuller arch) and the right eye (slightly smaller, offset notch) gives the face a winking or quizzical personality. All cut-outs are generous and smooth, making this a good pumpkin stencil for carvers who want a friendly face without tiny fiddly pieces. Leave the two small inner-eye notches for last so the arch stays rigid while you cut the mouth.
See template →
9. Smiley Jack-o-Lantern Pumpkin Stencil
Two large rounded arch eyes, each with a small notch cut from the bottom edge, sit above a wide U-shaped grin lined with four evenly spaced rectangular teeth in this easy pumpkin stencil. The result is a cheerful, friendly face rather than a sinister one, and when lit the broad open eyes and blocky smile radiate warmth across the porch. The small notches at the base of each eye are the only detail that can break off if carved too aggressively, so score those notch curves gently with the tip of your blade before removing the eye sections.
See template →
10. Classic Jack-o-Lantern Face Pumpkin Stencil
A tall, narrow jack-o-lantern face with a small witch-hat-style stem forms this easy pumpkin stencil, featuring two mismatched triangular eyes of slightly different sizes, a small triangle nose, and a wide mouth with uneven rectangular teeth below. The entire face outline tapers toward the bottom and the drooping curved tendrils at each lower corner add a melted look. All five facial openings cut cleanly through, letting candlelight pour out in a simple, instantly recognizable jack-o-lantern pattern. Carve the eyes first so you have reference points for spacing the mouth cuts.
See template →