25 Best Pumpkin Stencils

Explore 25 distinct best pumpkin stencils from the stencil library.

1. Spooky Tree in Moon Pumpkin Stencil
A bare-branched tree fills a full circular moon in this expert-level pumpkin stencil, its trunk and sweeping limbs carved away while dozens of tight spiral curls on every branch tip remain as solid orange bridges. The lit jack-o-lantern shows the curled branch ends glowing like tiny flames against the open black sky of the moon circle. Tackle the small spiral cuts at the outermost branch tips before removing any large background sections, so the sheet stays supported while you work the most delicate shapes.
See template →
2. Volleyball Pumpkin Stencil
A volleyball fills this easy pumpkin stencil from edge to edge, its circular outline and internal panel lines rendered in the classic three-curved-line pattern that divides the ball into panels. The wide panel sections are cut away, leaving the curved dividing strips as solid pumpkin flesh that forms the seam lines. When lit, the jack-o-lantern glows through the large open panels while the seam lines stay dark. Score along each curved seam line with a detail tool before cutting to keep the thin curved strips from tearing under the blade.
See template →
3. Virginia Pumpkin Stencil
Virginia's wide, wedge-shaped state outline fills this easy pumpkin stencil, showing the long straight northern border, the ragged mountainous western edge, the sweeping diagonal southern coastline, and the distinctive narrow Eastern Shore peninsula extending to the right. The entire shape is cut as a single open silhouette. The thin Eastern Shore tip is the most fragile point in this carving, so cut toward that peninsula from the main body first and finish with the very tip to prevent it from snapping off mid-cut.
See template →
4. Game Over Pumpkin Stencil
"GAME OVER" fills this easy pumpkin stencil in two stacked rows of chunky 8-bit pixel font lettering, each character built from squared-off rectangular blocks with notched corners that read unmistakably as retro video game text. Every letter interior is cut through, and the negative space between characters is narrow but distinct. The squared notches at the corners of each letter are the trickiest spots to keep clean; use the tip of a narrow blade to score those inside corners before opening the main letter body.
See template →
5. Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
See template →
6. Kawaii Mushroom Pumpkin Stencil
A kawaii-style mushroom character fills this hard pumpkin stencil, with a broad spotted cap, small horns or fins at the sides, and a round face below it showing large anime eyes and a tiny curved mouth. The cap spots are solid orange circles against a pierced cap background, and the face details are fine interior cuts within the solid round head. Carve the small circular spots on the cap before removing the large open cap area, so those circles have firm pumpkin wall behind them while you make the precise cuts.
See template →
7. Flying Owl Pumpkin Stencil
A front-facing owl in full wing spread fills this easy pumpkin stencil, the entire bird rendered as a single solid silhouette with ear tufts visible at the top of the head and feathered wingtips fanning wide on both sides. The whole shape is pierced as one large cutout, so the lit jack-o-lantern throws a bold bright owl outline with no interior detail to worry about. Thin the pumpkin wall evenly behind the wing tips before cutting, since the long feather edges can crack if the wall is too thick when you remove the large central section.
See template →
8. Ghost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
See template →
9. Jack-o-Lantern Face Pumpkin Stencil
A grinning jack-o-lantern face carved onto a jack-o-lantern makes this a pumpkin-within-a-pumpkin design: a wide ovoid pumpkin shape with a stubby stem has a furious face of angled triangular eyes, heavy brow cuts, and two rows of large zigzag teeth separated by a thick horizontal lip band. All the face features are cut through as open shapes. Carve the inner tooth gaps first, since they sit between two rows that span the widest open area, then release the eye triangles and brow cuts last to keep the upper face stable.
See template →
10. Snarling Wolf Face Pumpkin Stencil
A wolf face stares straight forward in this hard pumpkin stencil, its large triangular ears open and pierced, its almond-shaped eyes cut through, and its muzzle parted to reveal a fanged open mouth. The fur around the face is rendered as jagged zigzag edges, and the nose bridge and cheek ruff details are a mix of solid and cut sections that read as fur texture when lit. Carve the two thin lightning-bolt-shaped brow marks above the eyes before removing the larger eye cutouts, as they are the most fragile narrow strips in the design.
See template →
11. Howling Wolf Moon Pumpkin Stencil
A wolf howling at a large crescent-shaped moon fills this hard pumpkin stencil, with a trio of jagged pine trees to the left and the wolf's body set as a solid orange silhouette inside the open pierced moon arc. The moon itself is the glowing background that frames the wolf and trees, while the animal and pines remain as uncut pumpkin skin. When carving the pine tree segments, cut each zigzag branch notch one at a time using a small detail blade, since the tight repeated angles along the tree edges are easy to over-cut and merge into a single straight line.
See template →
12. Wyoming Pumpkin Stencil
Wyoming's nearly rectangular outline is the entire design in this easy pumpkin stencil, its flat top and bottom edges contrasting with small notches at the upper left and lower left corners that mark the state's actual border jogs. The whole interior is pierced as a single open cutout, producing a bright rectangle of light with just those two characteristic corner indentations to identify the Cowboy State. Score slowly through each interior corner notch: the blade naturally wants to skip past the short jog, so pause and reposition rather than trying to cut both sides of the notch in one stroke.
See template →
13. Rising Zombies Pumpkin Stencil
Two zombie figures rising from the ground face inward in this hard pumpkin stencil, their ragged arms reaching upward and their tattered lower bodies emerging from earth at the base of a tall oval negative space. The zombies read as solid orange silhouettes flanking a large central open oval, so the lit jack-o-lantern glows through that oval while the outstretched zombie arms and rotting fingers stand out in relief. Carve the finger details at the top of each arm before cutting the large central oval, as the fingers are the most fragile elements and benefit from the extra pumpkin mass still in place.
See template →
14. West Virginia Pumpkin Stencil
West Virginia's distinctive outline is one of the most jagged of all state stencils, with the panhandle jutting sharply upward from the north and a second narrow protrusion to the northeast, while the southwestern border follows a highly irregular path of peaks and valleys. The entire shape is pierced as one complex cutout. Because of the two thin panhandle arms, cut those narrow protrusions first with a detail blade while the body is still solid and can absorb any flex, then open the main body from the center outward.
See template →
15. Spider Emblem Pumpkin Stencil
A stylized spider rendered as a graphic emblem fills this easy stencil: the body is split into a large oval abdomen and a smaller rounded head kept solid as orange pumpkin, while the eight legs radiate outward as broad curved blades that taper to sharp points, all backed by cut-out negative space. The overall silhouette has a bold, almost logo-like quality that glows dramatically when lit. Leave the narrow waist bridge connecting the head to the abdomen until last, since removing adjacent leg gaps early can put stress on that small connector.
See template →
16. Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
See template →
17. Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
See template →
18. Scarecrow Pumpkin Stencil
A simple, cartoonish scarecrow stands with arms outstretched on this hard pumpkin stencil, wearing a wide-brimmed hat and showing a squiggly grimace for a mouth. The body and hat are solid pumpkin flesh while gaps between the outstretched arms, the ragged tunic slashes, and the stick post below are all cut through. The thin neck post connecting the head to the body is the most fragile element; complete all arm and tunic cuts before touching the area around that connector to keep the head from separating prematurely.
See template →
19. Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
See template →
20. Snail Pumpkin Stencil
A giant snail is the surprising subject here: a segmented spiral shell packed with dashed arc cutouts occupies most of the design, while the snail's body stretches out to the right and two small eyestalks rise from the head. The shell is built from concentric broken rings that leave thin solid bridges between segments, and the effect when lit is an intricate circular lantern orbited by a slow-moving creature. Cut the outermost arc segments of the shell first and work inward toward the central solid disc so the bridges hold until last.
See template →
21. UFO Flying Saucer Pumpkin Stencil
A cartoon flying saucer floats in this hard-difficulty pumpkin stencil, with a domed cockpit at the top showing a simple ghost-like alien face inside. A wide flattened disc body below features a row of oval porthole cutouts around its rim and sweeping curved rings beneath. The alien inside the dome and the porthole ovals are each separate pierced shapes. Cut the dome interior and the alien face details before opening the porthole ovals around the rim, so the dome remains attached and stable while you navigate the narrow disc body.
See template →
22. Coronavirus Pumpkin Stencil
This hard-difficulty pumpkin stencil depicts a coronavirus particle rendered as a circular arrangement of spike proteins: round-tipped stalks radiate outward from a central ring of crescent shapes, all cut as individual floating pieces within a large open surround. When lit, the scattered spikes and interior crescents glow as a constellation of shapes against the dark pumpkin. Carve the inner crescent cutouts at the center first, then work spike by spike outward, since removing the outer spikes early can destabilize the central ring.
See template →
23. Winking Face Emoji Pumpkin Stencil
A round emoji face with one eye winking shut and the other squinting in a spiral, a wide grin, and a tongue sticking out fills this easy pumpkin stencil. The large circular face outline, the wink line, the spiral eye, the smile strip, and the tongue are all solid orange wall, while the areas around them are pierced so the whole face glows from within. Carve the tongue's narrow center notch before removing the wide background cuts, since the notch is the tightest detail and easiest to slip on with excess pumpkin removed around it.
See template →
24. Cartoon Dragon Pumpkin Stencil
A small cartoon dragon perches in a rounded frame in this hard pumpkin stencil, showing a round-headed wyvern with stubby wings fanned behind it, a curled foreleg, and a spiky crest along the top of the frame. The body and wing details are a mix of open pierced sections and thin solid bridges, so the lit jack-o-lantern reveals the creature's rounded features glowing warmly inside the frame. Carve the two small oval eye cutouts and the tiny claw details first before removing the larger background areas, to keep the stencil stable during the fiddly work.
See template →
25. Snarling Bat Pumpkin Stencil
A wide-winged bat stretches nearly edge to edge in this easy bat pumpkin stencil, its wing panels divided by bold vein lines and a snarling cartoon face centered in the body. The wings are the large pierced areas that glow brightest, while the vein lines and the face details remain as solid orange strips inside the cutout. Carve the small pointed fangs in the face before tackling the big wing panels, so the blade has firm pumpkin wall support when making those fine cuts.
See template →