25 Extreme Pumpkin Templates

25 printable extreme pumpkin templates — ready to download, trace, and light up the porch.

1. Spooky Tree in Moon Pumpkin Stencil
A bare-branched tree fills a full circular moon in this expert-level pumpkin stencil, its trunk and sweeping limbs carved away while dozens of tight spiral curls on every branch tip remain as solid orange bridges. The lit jack-o-lantern shows the curled branch ends glowing like tiny flames against the open black sky of the moon circle. Tackle the small spiral cuts at the outermost branch tips before removing any large background sections, so the sheet stays supported while you work the most delicate shapes.
See template →
2. Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
See template →
3. Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton shown in full side profile fills this expert pumpkin stencil: a long skull with open jaw, four bony legs with claw toes, a ribcage made of many individual rib-bone cutouts, vertebral column, and four large dorsal plate outlines along the back. The sheer number of individual rib and bone segments, each separated by thin pumpkin bridges, makes this a complex carve. Cut the large dorsal back plates first since they are the most isolated shapes, then work through the ribcage from front to back one rib at a time to avoid destabilizing the spine bridge.
See template →
4. Bearded Man Portrait Pumpkin Stencil
A bearded man shown from chest up is rendered in this expert pumpkin stencil with fine portrait linework: tousled spiked hair, narrow cut-out lines for expressive eyes with visible irises, a trimmed goatee built from small isolated patches, an open jacket collar, and a table or surface line at the bottom. The face relies on dozens of thin pumpkin bridges to hold the portrait together, creating a detailed likeness when lit. Carve the small goatee patches and eye details first, before the larger jacket and background cuts are made, to keep the face area stable throughout.
See template →
5. USA Map Pumpkin Stencil
The contiguous silhouette of the contiguous United States is carved as a single open pierce-through in this expert pumpkin stencil. The intricate coastline, Great Lakes inlets, and Florida peninsula are all retained in the cut edge, requiring precise control all the way around the outline. Lit from inside, the pumpkin glows entirely through the mapped shape. Work clockwise around the perimeter without lifting your tool from the cut line, since re-entering the groove at a sharp angle like the Gulf Coast bays is the most common place where the wall cracks.
See template →
6. Fluffy Kitten Pumpkin Stencil
A wide-eyed, fluffy kitten sits upright with its front paws tucked forward in this expert-level pumpkin stencil. The fur is rendered as dozens of short jagged cut-outs that texture the entire head and body, with two large round eyes and a small tongue-out mouth pierced through in the face. Lit from within, the cat's face glows clearly while the fur detail creates a speckled halo of light around it. Cut all the inner facial features before the outer fur ring, since the edge fringe is fragile and removing those last keeps the face from shifting while you work.
See template →
7. Shaggy Cat Pumpkin Stencil
A sleek cat sits upright in this expert-level pumpkin stencil, its fur rendered in dozens of jagged, flowing cuts that create a shaggy, windswept silhouette from pointed ears to a curled tail tip. Narrow slivers form the whiskers and facial detail, while the body interior is laced with thin connecting bridges. When lit, the cat pumpkin carving glows with textured depth. Carve the whisker lines last and from the center outward, since they are the most likely to snap if the surrounding flesh shifts.
See template →
8. Sunflower Pumpkin Stencil
A large sunflower with roughly twenty lance-shaped petals radiating from a solid circular center disk fills this expert pumpkin stencil. Each petal is an individual pierce-through slot, separated from adjacent petals by a thin curved wall of pumpkin, and the disk center is also carved out. The lit jack-o-lantern blazes like a radiant wheel of light with the petal gaps glowing and the petal walls casting narrow spokes of shadow. Begin carving at the inner petal bases nearest the center disk before working toward the tips, keeping the disk cut for last so the petal ring retains its structural support.
See template →
9. Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
See template →
10. Vampire Count Pumpkin Stencil
A vampire count shown from the waist up dominates this expert pumpkin stencil: a swept-back widow's peak hairline, arched expressive brows, sharp angular cheekbones, a sneering half-open mouth, and a high-collared cape spread wide at the bottom. The face is built from many disconnected cut-out islands separated by thin pumpkin bridges, giving the lit design a dramatic stained-glass quality. Before cutting any facial details, map all the bridge lines carefully: the narrow strip between the brow and the cheek is the most fragile connector and must be preserved until the end.
See template →
11. Tiger Face Pumpkin Stencil
A full-face tiger portrait stares forward from this expert-level pumpkin stencil: the broad round head is ringed by a jagged fur ruff, two triangular ears with inner cutouts peek from the top corners, and the face is built from dozens of interlocking stripe-shaped cutouts that form the eyes, nose bridge, muzzle, and whisker spots. The lit result shows a photorealistic tiger rendered entirely in positive pumpkin bridges and negative glowing gaps. Work from the center of the face outward, cutting the small eye-iris pieces first before tackling the radiating stripe cuts that hold the whole design together.
See template →
12. Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
See template →
13. Sugar Skull with Roses Pumpkin Stencil
A sugar skull face with flower-ringed eye sockets, a crown of jagged flames, a heart-shaped nose, and rectangular teeth is surrounded by six individually carved roses in this expert pumpkin stencil. Every petal cluster, leaf, and decorative element is a separate pierce-through, creating an intricate Day of the Dead tableau. The carved pumpkin glows through dozens of individual openings simultaneously. Work from the center outward: finish all skull face details before the outer roses, so you can brace the pumpkin face-side-down when carving the perimeter flower clusters.
See template →
14. Zombies Pumpkin Stencil
The word "ZOMBIES" in dripping, horror-font letters anchors this stencil, with a row of grasping undead arms and hands rising above the text from a pool of slime below. All the negative space around the letters and arms is cut away, leaving the drip shapes and reaching fingers glowing against the pumpkin flesh. The thin drip strands between letters are the most fragile part of this carving, so cut each letter interior first and leave the connecting drips until the very end.
See template →
15. Monster Truck Pumpkin Stencil
A side-view monster truck with massive knobby tires dominates this expert pumpkin stencil: two oversized wheels with five-spoke rims, a high-clearance suspension chassis visible between the tires, a boxy cab with window cutouts, a wide front bumper, and flame or dragon graphics on the door panel. The many narrow bridges connecting the chassis rails and the spoke details inside each wheel make this a demanding carve. Cut the interior cab windows and bumper slots first, then tackle the five spokes of each wheel one at a time, always working away from the thin axle hub at the center.
See template →
16. Grim Reaper with Scythe Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
See template →
17. Pirate Skull Pumpkin Stencil
A grinning pirate skull wearing a broad tricorn hat dominates this expert-level pumpkin stencil, with a second miniature skull-and-crossbones badge emblazoned on the hat brim. Dense cutwork in the teeth row, eye sockets, and hat badge creates many small isolated pieces held together by narrow bridges of pumpkin flesh. Begin with the tiny crossbone details on the hat badge while your hands are freshest, then move to the eye sockets and finally the toothed lower jaw.
See template →
18. Horned Demon Skull Pumpkin Stencil
A demonic horned skull with massive curved ram-like horns and a symmetrical face composed of dozens of interlocking cut fragments makes this one of the most intricate skull pumpkin stencils available. The forehead, cheeks, and jaw are all broken into shaped segments separated by thin pumpkin bridges, and the horns are densely cross-hatched with ridged cuts. Work from the center outward, cutting the tiniest interior fragments first before opening any large jaw or eye-socket voids, to avoid collapsing the many delicate bridges that hold the design together.
See template →
19. Soccer Player Pumpkin Stencil
A chibi-style bearded soccer player in a striped jersey stands with a ball tucked under one arm and his other hand on his hip in this expert sports pumpkin stencil, with a detailed face, layered hair, jersey stripes, and individual fingers all rendered in fine linework. When lit, the figure glows in silhouette with the face and jersey detail visible as pumpkin-skin relief. Start with the most detailed facial features, particularly the brow, ear, and beard cuts, before working downward through the jersey stripes and ball pentagon pattern.
See template →
20. Haunted Tree Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
See template →
21. Man Portrait Pumpkin Stencil
A scowling man's portrait rendered in tight linework stares out from this expert pumpkin stencil, one hand raised in a defiant gesture with a skeleton hand overlaid on it, the figure's jacket and muscular build conveyed through angled slash cuts below the face. The design relies on many small interior cuts to build the facial features, making it a demanding carve. Tackle the densely detailed face first, cutting the brow wrinkles, nostril, and lip cuts before opening any of the larger torso voids.
See template →
22. Grim Reaper Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
See template →
23. Flame Werewolf Pumpkin Stencil
A werewolf head in profile faces right, built entirely from flame-shaped strokes and pointed fur tufts that radiate outward from a snarling snout and bared teeth, creating a tribal-tattoo effect across the whole pumpkin face. The design has no large open areas; instead dozens of narrow flame cuts pierce through, leaving thin pumpkin bridges between each cut that glow orange and separate clearly from the negative space. Cut the smallest innermost flame tips around the snout first, then spiral outward to the largest wing-like strokes at the edges.
See template →
24. Mummy Pumpkin Stencil
A mummy's head and shoulders rise from a base of wrapping strips in this expert pumpkin stencil, the face emerging through layered horizontal and diagonal bandage cut-outs that reveal a single visible eye and a grimacing mouth. The design is dense with interlocking cut shapes separated by thin strips of uncut pumpkin that simulate gauze wrapping. Work from the face outward, completing the eye and mouth details before tackling the long bandage strips so the central features stay stable throughout.
See template →
25. Twisted Haunted Tree Pumpkin Stencil
A twisted, leaning haunted tree with gnarled branch-arms, a hollow face cavity with two small round eye holes, and exposed root tendrils sprawling across the ground makes up this expert tree pumpkin stencil. The writhing upper branches and root fingers are each narrow separate cuts, while the face hollow is the main open void at the center. Carve the largest root sections at the base first since they anchor the lower design, then progress upward through the arm-branches, leaving the thin finger-tip branches and the tiny eye circles for last.
See template →