25 Novice Patriotic Pumpkin Printables

25 printable novice patriotic pumpkin printables — ready to download, trace, and light up the porch.

1. Vermont Pumpkin Stencil
Vermont's narrow, elongated state outline is pierced as a single open shape on this easy pumpkin stencil, showing the slightly irregular wavy eastern border, the smoother western edge along Lake Champlain, and the small northern bump where the Northeast Kingdom juts upward. Lit, it glows as a tall vertical window of light. Because Vermont's outline runs close to the top of a typical pumpkin curve, tape the stencil with the northern bump positioned at least an inch below the stem base to leave enough wall thickness.
See template →
2. USA Text Pumpkin Stencil
Bold block letters spelling "USA" are carved as open pierce-throughs in this easy pumpkin stencil, with a five-pointed star replacing the crossbar of the letter A. The rounded, wide letters are generously sized and leave thick orange walls between them. On the lit pumpkin the three letters glow brightly and the star cutout inside the A shines as a distinct shape. Score the star outline inside the A before cutting the surrounding letter body, since the star's tight inner points are easiest to navigate when the pumpkin wall around them is still rigid.
See template →
3. New Mexico Pumpkin Stencil
New Mexico's silhouette is a nearly perfect square with one small rectangular notch cut into the upper-left corner where the Colorado border steps slightly northward. This beginner-friendly pumpkin stencil carves as a single large open shape, glowing as a bold square of light on the finished jack-o-lantern. The one detail that differentiates it from a plain square is that upper-left step: score the corner notch cleanly before removing the bulk of the shape so the step stays sharp rather than rounding off.
See template →
4. Nevada Pumpkin Stencil
Nevada's distinctive silhouette gives this beginner pumpkin stencil its character: a wide flat top, a long diagonal slash running from the upper-right corner down to the lower-left, and a small rectangular notch cut into the southern tip where the Colorado River forms the state line. The whole shape is carved as one open cutout so the jack-o-lantern's candle light illuminates the full state outline. The diagonal left edge is the identifying feature; carve it as a single long confident stroke rather than short segments so the line stays true.
See template →
5. Minnesota Pumpkin Stencil
Minnesota's outline appears in this pumpkin stencil as a broad near-rectangular shape with a small protrusion extending to the upper left for the Northwest Angle and a gentle scalloped northern border that traces the lake-country edge. The entire state silhouette is carved as one open cutout, and the smooth southern and western borders contrast with the more irregular northern and eastern edges. The Northwest Angle nub is a small isolated tip connected by a narrow strip, so cut that corner carefully before removing the main body to prevent it from tearing loose.
See template →
6. MAGA Pumpkin Stencil
The acronym "MAGA" is set in wide, bold stencil letters on the upper portion, with a row of five evenly spaced five-pointed stars running beneath it. All letters and stars are fully pierced through, so the finished jack-o-lantern glows the text and stars against the night. The star points are the sharpest cuts in this design; carve each star from its center outward to each tip rather than tracing the outer perimeter, which helps keep the thin points from tearing.
See template →
7. I Love Virginia Pumpkin Stencil
Four thick, serif-style shapes form an "I heart VA" layout on this Virginia pumpkin stencil: a tall I on the upper left, a wide heart on the upper right, and the letters V and A filling the lower half, each one fully cut through so the jack-o-lantern glows with clean, recognizable state pride. The cut-outs are generously sized with tight serif terminals; use a detail blade to navigate the inside corners of the A's crossbar without snapping the narrow bridge connecting it to the outer counter.
See template →
8. Kansas State Shape Pumpkin Stencil
Kansas appears as a nearly perfect rectangle on this pumpkin stencil, distinguished by a small notched step in the upper-right corner where the state's northeastern border jogs to follow the Missouri River. The entire shape is cut as one large open window, making this one of the broadest single-piece openings in any state stencil. Because the wide horizontal cut-out can weaken the pumpkin, place a support skewer through the pumpkin's interior wall before carving to keep the top from sagging while you work the lower edge.
See template →
9. I Love Oregon Pumpkin Stencil
Oregon's pumpkin stencil presents "I [heart] OR" in two rows with bold open letters. The "O" in "OR" is again a ring shape with an inner counter, while the "R" has a vertical stem, a curved upper lobe, and a diagonal leg kicking out to the lower right. Cut the "O" ring early in the session, then move to the "R", carving the stem and lobe before finishing with the diagonal leg, which should be released last to keep the lobe supported until the final stroke.
See template →
10. I Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
See template →
11. I Love South Dakota Pumpkin Stencil
South Dakota's pumpkin stencil presents "I [heart] SD" in two rows of rounded block type, with a large heart above and the state abbreviation "SD" below. The "S" curves in two opposing arcs while the "D" is a straight upright with a large curved lobe. Carve the "D" first since its single lobe shape is easier to control, then tackle the reverse-curve "S" from top to bottom in one continuous stroke to keep the waist of the letter smooth.
See template →
12. Idaho State Shape Pumpkin Stencil
Idaho's distinctive outline fills this pumpkin stencil as a single large cut-out: the tall rectangular panhandle at top, the jagged stepped eastern border descending through several notches, and the broader southwestern base, all pierced through to let candlelight define the state's shape. Because the panhandle is narrow relative to the body, carve the wider base first and work upward, keeping the thin panhandle as the last cut so the stencil holds its shape on the pumpkin surface until the very end.
See template →
13. I Love Texas Pumpkin Stencil
Texas's pumpkin stencil carves the iconic "I [heart] TX" across two rows in bold rounded letterforms. The "X" is the standout shape: two diagonal strokes crossing at the center, leaving four triangular cutout wedges separated by the thin intersection point. Carve one diagonal of the "X" completely before starting the second, and use a plunge cut at the center crossing point to avoid tearing the pumpkin at the junction where the two strokes meet.
See template →
14. I Love Nebraska Pumpkin Stencil
Nebraska's pride pumpkin stencil lays out "I [heart] NE" in two tidy rows, with the heart anchoring the center and bold rounded letters "NE" filling the lower half. All shapes are complete pierce-through cutouts that glow evenly when lit. The "E" features three horizontal bars extending from a vertical spine, and those thin bars are the narrowest cuts in this design, so work from the outer tips inward on each bar to keep them from cracking before you complete the vertical spine.
See template →
15. Kentucky State Shape Pumpkin Stencil
Kentucky's silhouette on this pumpkin stencil is immediately recognizable: a wide horizontal shape with a jagged, highly irregular northern border formed by the Ohio and Big Sandy River lines, a relatively smooth southern edge, and a narrow western tail that extends down and to the left. The northern border has the most intricate linework of any state stencil in this series; work those small notches with a narrow pointed blade, making short plunge cuts at each concave corner rather than trying to sweep around them.
See template →
16. Illinois State Shape Pumpkin Stencil
Illinois carves as a single bold silhouette on this pumpkin stencil: a gently irregular vertical shape wider at the top, with a notched northwest corner and a distinctive southward-pointing tip at the lower right where the state meets the Ohio River confluence. The entire outline is pierced through, so the glowing window reads cleanly as Illinois's unmistakable profile. Work the concave northwest notch with short controlled strokes, and save the delicate southern tip for last to keep the stencil firmly attached during the earlier cuts.
See template →
17. I Love Idaho Pumpkin Stencil
Idaho's "I Love ID" stencil follows the familiar two-row grid with a block I and heart on top, and the letters I and D below. The lower I is a simple open rectangle, while the D is a large rounded-rectangle counter that needs its curved interior removed as one piece. Because the D's inner oval is large, make a relief cut at the top before removing to avoid the pumpkin wall flexing and cracking as the piece comes free.
See template →
18. I Love Colorado Pumpkin Stencil
Colorado's state-pride stencil follows the familiar "I Love" grid with a block I, a large heart, and the abbreviation CO. The O presents the key carving challenge: it requires an interior oval counter to remain as a solid island inside the letter, or the O collapses to a plain hole. On the carved pumpkin the O's counter glows as a bright orange oval surrounded by a dark ring, giving the letter its shape. Cut the outer O first, then switch to a fine blade to cut the inner oval, leaving that center disk attached to nothing, it will hold in place by friction until gently pushed out.
See template →
19. I Love Connecticut Pumpkin Stencil
Connecticut's "I Love CT" stencil is built from a block I, a solid heart, and the letters CT in bold rounded type. The C is a simple open arc with no counter, and the T has a wide crossbar and a straight stem, both cut as one continuous open silhouette. All four shapes pierce cleanly with no floating islands, making this one of the simpler state stencils in the series. Keep the horizontal bridge between the top row and the bottom CT row at least a half-inch thick to support the finished carving.
See template →
20. I Love Kentucky Pumpkin Stencil
Kentucky's "I Love KY" stencil uses the two-row grid with block I and heart above, and the letters K and Y below in rounded block type. The Y's upper two diagonal arms and straight lower stem form a clean open silhouette with no counters, while the K mirrors the structure described for the Kansas stencil. When lit, both bottom letters glow as bright filled shapes. For the Y, make the two upper arm cuts first, meeting at the center junction, then cut straight down the stem to complete the shape cleanly.
See template →
21. I Love Iowa Pumpkin Stencil
Iowa's "I Love IA" stencil arranges the block I and heart on the top row, with the letters I and A below in the same rounded slab typeface. The A carries the familiar triangular interior counter that keeps the letter recognizable; the I beside it is a plain open rectangle. Because the A counter sits close to the lower edge of the letter, cut the outer A shape fully before addressing the counter, so the surrounding wall is already stable when you remove the small triangle.
See template →
22. I Love Arizona Pumpkin Stencil
This Arizona pumpkin stencil follows the same bold "I Love" grid layout: block letter I, large solid heart, and the state abbreviation AZ in chunky rounded letters. The Z's diagonal stroke makes it distinctive among state stencils, and the lack of interior counters means all four shapes cut cleanly as open silhouettes with no floating islands to worry about. Keep the gap between the bottom of the heart and the top of the A narrow enough to leave an unbroken pumpkin bridge between the two rows of letters.
See template →
23. I Love Indiana Pumpkin Stencil
Indiana's "I Love IN" stencil uses the standard two-row grid with block I and heart above, and the letters I and N below in chunky rounded type. The N's two diagonal strokes create a triangular interior space that is left solid rather than cut, so the letter reads as a heavy outline with a solid fill. The carved pumpkin shows the N as a bright outline shape with orange glow around its perimeter and a solid center. Cut the N's two vertical legs first, then the diagonal interior, keeping each stroke short and deliberate to follow the letter's angle accurately.
See template →
24. Delaware Pumpkin Stencil
The outline of Delaware is cut through as a single solid-edged silhouette in this state pumpkin stencil, its distinctive narrow rectangular body with the curved northeastern arc at the top rendered cleanly in one piece. When lit, the entire state shape glows as an open window of light. Because this is a single large cut-out with no interior detail, position the shape toward the center of the pumpkin face and use a sharp saw blade to follow the curved northeastern border without tearing.
See template →
25. Connecticut Pumpkin Stencil
Connecticut's compact, slightly irregular state outline fills this easy pumpkin stencil: a roughly rectangular silhouette with a gentle concave nick at the lower-right corner and subtly wavy edges that trace the actual border contours. The entire shape cuts out as a single piece, glowing in isolation against the uncut orange pumpkin skin. Because the outline has no interior detail, the challenge is keeping the thin shell border even, so use a small detail saw and rotate the pumpkin rather than repositioning your hand at the tight lower-right corner.
See template →