Similar pumpkin stencils
View all stencils →About this stencil
The Vermont pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. Vermont's narrow, elongated state outline is pierced as a single open shape on this easy pumpkin stencil, showing the slightly irregular wavy eastern border, the smoother western edge along Lake Champlain, and the small northern bump where the Northeast Kingdom juts upward. Lit, it glows as a tall vertical window of light. Because Vermont's outline runs close to the top of a typical pumpkin curve, tape the stencil with the northern bump positioned at least an inch below the stem base to leave enough wall thickness. It makes a fun jack-o'-lantern design for Halloween night. It is rated Beginner-friendly. Estimated time: 30-45 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 30-45 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Start at the northern point. Begin at the small pointed bump at the top of the outline. Cut each side of the point toward its tip with single strokes so the narrow peak does not tear.
- Work down the wavy eastern edge. Follow the rippling right-hand border with long, steady strokes, rotating the pumpkin through each gentle curve instead of steering the blade hard.
- Tab the west side and release. Cut the smoother left edge last, leaving a small tab about halfway up. Support the tall plug with your free hand, finish the tab, and push the state out from inside the pumpkin.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyConnecticut Pumpkin Stencil
Connecticut's compact, slightly irregular state outline fills this easy pumpkin stencil: a roughly rectangular silhouette with a gentle concave nick at the lower-right corner and subtly wavy edges that trace the actual border contours. The entire shape cuts out as a single piece, glowing in isolation against the uncut orange pumpkin skin. Because the outline has no interior detail, the challenge is keeping the thin shell border even, so use a small detail saw and rotate the pumpkin rather than repositioning your hand at the tight lower-right corner.
Beginner-friendlyI Heart New Jersey
Show some Garden State love with this bold lettering design: the word I, a big glowing heart, and the letters N and J stacked in a classic two-row layout, all pierced fully through the pumpkin wall. The chunky serif letters are forgiving for an easy carve; cut each letter stroke as its own piece rather than one big chunk, and save the J's curved hook for last since its tail is the thinnest part.
Beginner-friendlyI Heart South Carolina
State pride spelled out plainly: a bold serif I, a big glowing heart, and the letters SC stacked in two rows across the pumpkin face. Each letter and the heart cut fully through, and the thick strokes make this an easy lettering carve with no fragile pieces. Cut the heart's top notch first to set its shape, then saw each letter stroke in straight runs, squaring the serifs from inside the openings.
Beginner-friendlyI Heart Nevada
Styled after the famous city-love logo, this design spells out I, a big heart, then the letters N and V in chunky serif capitals, all cut straight through so the message glows for the whole street. The block letters are simple, but keep an eye on the enclosed spaces; the letters are solid cutouts with no counters to bridge, so just take the wide strokes out in sections and square up the serifs with a small knife.
Beginner-friendlySheriff's Star Pumpkin Stencil
A six-point sheriff-style badge star with rounded ball tips glows proudly from the pumpkin in this tribute to law enforcement. The full star is removed as one big cutout, so the badge shines as a single bold panel of light. It is an easy carve despite the fancy silhouette; saw each point from its ball tip back toward the star body, and rotate the pumpkin as you go so every cut is at a comfortable angle.
Beginner-friendlyWyoming State Shape
Wyoming's famously rectangular border becomes one big luminous panel in this ultra-simple state cutout. The entire shape is removed through the wall, giving you a broad, even wash of candlelight with crisp square corners. It is about as beginner-friendly as carving gets; tape the stencil level, score the four sides with a ruler as your guide, and take the big slab out in two halves so it releases without cracking the surrounding wall.