Similar to This
View all stencils →About this stencil
Show some Garden State love with this bold lettering design: the word I, a big glowing heart, and the letters N and J stacked in a classic two-row layout, all pierced fully through the pumpkin wall. The chunky serif letters are forgiving for an easy carve; cut each letter stroke as its own piece rather than one big chunk, and save the J's curved hook for last since its tail is the thinnest part. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyNevada Heart Lettering
Styled after the famous city-love logo, this design spells out I, a big heart, then the letters N and V in chunky serif capitals, all cut straight through so the message glows for the whole street. The block letters are simple, but keep an eye on the enclosed spaces; the letters are solid cutouts with no counters to bridge, so just take the wide strokes out in sections and square up the serifs with a small knife.
Beginner-friendlySouth Carolina Heart Lettering
State pride spelled out plainly: a bold serif I, a big glowing heart, and the letters SC stacked in two rows across the pumpkin face. Each letter and the heart cut fully through, and the thick strokes make this an easy lettering carve with no fragile pieces. Cut the heart's top notch first to set its shape, then saw each letter stroke in straight runs, squaring the serifs from inside the openings.
Beginner-friendlyTennessee Heart Lettering
Bold serif lettering spells out I heart TN in the classic love-declaration layout, with a chunky letter I and heart on the top row and big TN initials below. Every letter and the heart are cut fully through, and the thick strokes make the sawing forgiving for a lettering design. Trace the serifs carefully when transferring the pattern, then cut each letter's inside corners with a fine blade for crisp typography.
Beginner-friendlyI Love Nebraska Pumpkin Stencil
Nebraska's pride pumpkin stencil lays out "I [heart] NE" in two tidy rows, with the heart anchoring the center and bold rounded letters "NE" filling the lower half. All shapes are complete pierce-through cutouts that glow evenly when lit. The "E" features three horizontal bars extending from a vertical spine, and those thin bars are the narrowest cuts in this design, so work from the outer tips inward on each bar to keep them from cracking before you complete the vertical spine.
Beginner-friendlyI Love Texas Pumpkin Stencil
Texas's pumpkin stencil carves the iconic "I [heart] TX" across two rows in bold rounded letterforms. The "X" is the standout shape: two diagonal strokes crossing at the center, leaving four triangular cutout wedges separated by the thin intersection point. Carve one diagonal of the "X" completely before starting the second, and use a plunge cut at the center crossing point to avoid tearing the pumpkin at the junction where the two strokes meet.
AdvancedI Love New Hampshire Pumpkin Stencil
Rated advanced, this New Hampshire pumpkin stencil presents "I [heart] NH" in two rows with oversized block letters. The "N" and "H" are rendered in wide rounded caps: the "N" has a diagonal stroke creating a narrow wedge, while the "H" has a horizontal crossbar suspended between two uprights, leaving two open windows on either side. Tackle the "H" crossbar with plunge cuts at each end before sawing across to prevent the bridge from snapping under blade pressure.