Similar to This
View all stencils →About this stencil
A big I, a solid heart, and the letters MI glow in two stacked rows, spelling out hometown pride for the Great Lakes State. Every letter and the heart are cut fully through, with thick serif strokes that hold up well in a real pumpkin wall. It is an easy carve for tailgates and porch season; transfer the letters with a poked outline so the baselines stay level. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the upper I. Cut region 1 around its stout rounded serifs and upright stem. Preserve the white gap above the M.
- Trace the broad heart. Cut region 2 along the unequal lobes and low point. Preserve the gap above the lower I and support the large plug as the final edge releases.
- Finish the MI initials. Cut both regions marked 3. Follow the M with its low central point and unequal diagonal arms, then the separate tall I. Keep both open M recesses and the full white spacing between the initials intact.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyFlorida Heart Lettering
A bold I sits beside a big full heart, with the letters F and L stacked underneath, spelling out Florida love in thick serif type. The heart and all three letters are cut completely through for a bright, readable message after dark. This easy carve suits first-time letter cutters; keep the serifs slightly chunky rather than trimming them thin, and cut the heart's inner notch before removing the rest of the shape.
Beginner-friendlyWyoming Heart Lettering
Show your Wyoming pride with bold block lettering: a big capital I and a chunky heart across the top row, with large W and Y letters beneath. Each letter and the heart are cut fully through, so the message glows like a marquee at night. An easy lettering carve with one classic tip: tape the stencil securely and cut slightly inside the traced lines, since letters look cleaner when the strokes stay uniform in width.
Beginner-friendlyUtah Heart Lettering
A two-row hometown tribute: a serif I beside a full heart on top, with big U and T letters below, every shape cut through to glow warmly at night. The letterforms are thick and simple, so this carves quickly. The U's inner curve is the only tight turn; saw it in two passes meeting at the bottom of the arc so the inside edge stays smooth.
Beginner-friendlyWisconsin Heart Lettering
Wisconsin love, spelled out big: a tall letter I and a plump heart across the top row with wide W and I letters underneath. All the letterforms and the heart are cut clean through in a chunky serif style, so the message beams from the porch after sunset. As an easy carve, the only tricky spot is the W's inner points; nick each notch with the blade tip before making the long cuts.
Beginner-friendlyMinnesota Heart Lettering
The message reads I, a plump heart, then the letters M and N stacked below, spelling out love for Minnesota in chunky serif lettering. Each letter and the heart are cut fully through, so the whole message glows like a hometown marquee. An easy lettering carve; the only care points are the small rind gaps inside the M and N, so cut each letter's openings before freeing its outer edges.
Beginner-friendlyNew Mexico Heart Lettering
Block letters spell out I heart NM in two rows, with a bold heart standing in for love, all pierced clean through the pumpkin wall. Each letter is a chunky serif shape with wide strokes, so there are no fragile slivers despite the lettering. This easy design carves quickest if you remove the heart first, then work the letters left to right, keeping the serifs crisp with short controlled cuts.