Similar pumpkin stencils
View all stencils →About this stencil
Download the I Love Indiana pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Indiana's "I Love IN" stencil uses the standard two-row grid with block I and heart above, and the letters I and N below in chunky rounded type. The N's two diagonal strokes create a triangular interior space that is left solid rather than cut, so the letter reads as a heavy outline with a solid fill. The carved pumpkin shows the N as a bright outline shape with orange glow around its perimeter and a solid center. Cut the N's two vertical legs first, then the diagonal interior, keeping each stroke short and deliberate to follow the letter's angle accurately. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 45-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 45-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut both I letters. Cut the tall serif I at the top left and the I at the bottom left. Work into the tight corners where the serif bars meet each stem from both directions.
- Cut the N. Cut the N's two upright legs first, then the thick diagonal connecting them. Take the narrow white notches at the top right and bottom left of the letter slowly; cut into each from both sides.
- Release the heart on a tab. The heart is the biggest plug on the pattern. Cut down into its top notch from both sides, leave a small tab along one lower curve, support the piece from behind, then finish and lift it out.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyI Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
Beginner-friendlyI Love Idaho Pumpkin Stencil
Idaho's "I Love ID" stencil follows the familiar two-row grid with a block I and heart on top, and the letters I and D below. The lower I is a simple open rectangle, while the D is a large rounded-rectangle counter that needs its curved interior removed as one piece. Because the D's inner oval is large, make a relief cut at the top before removing to avoid the pumpkin wall flexing and cracking as the piece comes free.
Beginner-friendlyI Love Kentucky Pumpkin Stencil
Kentucky's "I Love KY" stencil uses the two-row grid with block I and heart above, and the letters K and Y below in rounded block type. The Y's upper two diagonal arms and straight lower stem form a clean open silhouette with no counters, while the K mirrors the structure described for the Kansas stencil. When lit, both bottom letters glow as bright filled shapes. For the Y, make the two upper arm cuts first, meeting at the center junction, then cut straight down the stem to complete the shape cleanly.
Beginner-friendlyI Heart Florida
A bold I sits beside a big full heart, with the letters F and L stacked underneath, spelling out Florida love in thick serif type. The heart and all three letters are cut completely through for a bright, readable message after dark. This easy carve suits first-time letter cutters; keep the serifs slightly chunky rather than trimming them thin, and cut the heart's inner notch before removing the rest of the shape.
Beginner-friendlyI Heart Mississippi
This hometown tribute stacks I heart on the top line and MS below in thick block letters, with a plump heart doing the talking. Each letter and the heart are pierced as separate bold shapes with plenty of shell between them, keeping the wall strong. For this easy design, cut the S from the center outward in two hooked passes so its curves stay even, then finish with the heart.
Beginner-friendlyI Heart New Jersey
Show some Garden State love with this bold lettering design: the word I, a big glowing heart, and the letters N and J stacked in a classic two-row layout, all pierced fully through the pumpkin wall. The chunky serif letters are forgiving for an easy carve; cut each letter stroke as its own piece rather than one big chunk, and save the J's curved hook for last since its tail is the thinnest part.