25 Spooky Pumpkin Printables

Explore 25 distinct spooky pumpkin printables from the stencil library.

1. Spider Pumpkin Stencil
A large eight-legged spider crouches in full top-down view on this easy Halloween pumpkin stencil, its oval abdomen and round cephalothorax left as solid orange while all the space between the angled legs is pierced through. Eight legs radiate outward and slightly downward from the body, each tapering to a point. The gaps between legs are the cut areas, so work around the spider methodically to avoid accidentally snapping any single leg at its thinnest point near the body junction.
See template →
2. Spooky Tree in Moon Pumpkin Stencil
A bare-branched tree fills a full circular moon in this expert-level pumpkin stencil, its trunk and sweeping limbs carved away while dozens of tight spiral curls on every branch tip remain as solid orange bridges. The lit jack-o-lantern shows the curled branch ends glowing like tiny flames against the open black sky of the moon circle. Tackle the small spiral cuts at the outermost branch tips before removing any large background sections, so the sheet stays supported while you work the most delicate shapes.
See template →
3. Spider Emblem Pumpkin Stencil
A stylized spider rendered as a graphic emblem fills this easy stencil: the body is split into a large oval abdomen and a smaller rounded head kept solid as orange pumpkin, while the eight legs radiate outward as broad curved blades that taper to sharp points, all backed by cut-out negative space. The overall silhouette has a bold, almost logo-like quality that glows dramatically when lit. Leave the narrow waist bridge connecting the head to the abdomen until last, since removing adjacent leg gaps early can put stress on that small connector.
See template →
4. Rat Pumpkin Stencil
A rat rearing up on its hind legs fills this Halloween pumpkin stencil, its long curved tail sweeping to one side and multiple whiskers fanning from both sides of the snout. The body is largely solid orange pumpkin skin framed by a pierced silhouette, so candlelight outlines the creature's claws and ragged chest fur in warm amber. Cut the whisker lines early while the stencil is anchored: there are three to four per side, so work from the snout outward on each side before opening the larger body area.
See template →
5. Witch with Staff Pumpkin Stencil
A robed witch figure stands holding a tall staff topped with a flame in this expert pumpkin stencil, her pointed hat bearing a spiral curl at the tip and wisps of energy trailing her cloak and pooling at her feet. The design reads as a solid silhouette with strategic interior cuts for the face, flame, and cloak detail, so candlelight halos the entire figure while the fine interior strips glow separately. Keep the narrow bridge connecting the flame to the staff intact until last, as it is the most likely point to snap under blade pressure.
See template →
6. Haunted House Pumpkin Stencil
Two stacked haunted house facades make up this easy pumpkin stencil: an upper story with a steep peaked roofline and a tall arched window topped by a smaller rectangular pane, then a lower story with its own peaked roof, a grid window, and a rounded arch doorway, all sitting on a narrow uneven ground strip. The cut sections are the rooflines, windows, door, and ground strip, while solid pumpkin bridges between them keep the tiers separate. Cut the smallest window panes first so the surrounding structure stays rigid while the larger roofline panels are removed.
See template →
7. Graveyard Scene Pumpkin Stencil
A bare, gnarled tree with reaching branches, a perched owl, two flying bats, and a cluster of cemetery cross tombstones fill a large crescent-moon frame in this expert graveyard pumpkin stencil. Nearly every element is a carved pierce-through, leaving thin orange bridges for the tree branches and tombstone edges. The lit pumpkin produces a richly detailed haunted graveyard scene. Start with the smallest elements inside the scene, such as the owl silhouette and the cross details on each tombstone, before the large moon arc is removed and the frame loses rigidity.
See template →
8. Stegosaurus Skeleton Pumpkin Stencil
A stegosaurus skeleton shown in full side profile fills this expert pumpkin stencil: a long skull with open jaw, four bony legs with claw toes, a ribcage made of many individual rib-bone cutouts, vertebral column, and four large dorsal plate outlines along the back. The sheer number of individual rib and bone segments, each separated by thin pumpkin bridges, makes this a complex carve. Cut the large dorsal back plates first since they are the most isolated shapes, then work through the ribcage from front to back one rib at a time to avoid destabilizing the spine bridge.
See template →
9. Gargoyle Pumpkin Stencil
A crouching gargoyle with spread bat wings, a fanged open jaw, and clawed feet fills this hard pumpkin stencil. The wings are rendered as multiple angled blade-like panels, the body and head form a compact central mass, and the whole figure is composed of closely spaced pierce-throughs separated by narrow pumpkin-wall bridges. Lit from within, the gargoyle appears as a fiery orange silhouette. Begin with the head and jaw details before cutting the wing panels, since the narrow bridges connecting the wing sections to the body spine are the most structurally critical lines in this design.
See template →
10. Mummy Pumpkin Stencil
A mummy figure wrapped in overlapping bandage strips stands upright in this hard pumpkin stencil: a round hooded head with two crescent eye cutouts and small circle pupils, a neck section, and a torso crisscrossed with diagonal and horizontal bandage-strip cutouts that create an intricate lattice pattern in the lower half of the design. Lit from inside, the bandage lattice glows as a grid of bright lines framed by solid pumpkin strips. Begin with the two eye crescents and pupil circles in the face, then work downward through the lattice section one row at a time to keep the remaining skin stable.
See template →
11. Ghost Mask Pumpkin Stencil
A ghost-faced horror-movie mask is the subject of this easy pumpkin stencil: an elongated oval skull shape with two large teardrop eye cutouts, a small oval nose hole, and a wide gaping mouth that tapers to a pointed chin. Flowing tendrils extend from the lower sides of the mask. The three facial openings glow as three distinct shapes, and the flowing lower extensions give the mask a draping, spectral quality when lit. Cut the narrow nose piece first since it sits between the two large eye openings and is the most vulnerable to tearing.
See template →
12. Skull Crown Ghost Pumpkin Stencil
A round skull face wearing a crumbling castle battlement crown tops this ghost pumpkin stencil. Large angry eyes with flame-shaped pupils, a small cracked nose bridge, and a row of jagged teeth fill the circular face, all pierced as cut-throughs while the surrounding ring frame and crown teeth remain as solid pumpkin. The lit jack-o-lantern glows through the eyes and mouth in a fierce scowl. Carve the crown battlements first before cutting the circle frame below, so the narrow wall sections holding the crown have full support while you work.
See template →
13. Haunted House Moon Pumpkin Stencil
A tall haunted mansion with jagged roofline towers, arched windows, and a wide front door fills the center of a large circular moon cutout in this pumpkin stencil. Two bats flank the upper towers, and tufts of grass sprout at the base. The moon circle is the main open cut, while the house is retained as pumpkin wall, glowing orange against the dark void. Carve the rectangular window openings and the door arch before cutting the surrounding moon circle, so the house structure has support while you work the fine edge details.
See template →
14. Ghost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
See template →
15. Twisted Haunted Tree Pumpkin Stencil
A twisted, leaning haunted tree with gnarled branch-arms, a hollow face cavity with two small round eye holes, and exposed root tendrils sprawling across the ground makes up this expert tree pumpkin stencil. The writhing upper branches and root fingers are each narrow separate cuts, while the face hollow is the main open void at the center. Carve the largest root sections at the base first since they anchor the lower design, then progress upward through the arm-branches, leaving the thin finger-tip branches and the tiny eye circles for last.
See template →
16. Skeletal Ghost Pumpkin Stencil
A skeletal ghost figure with a domed, skull-like head, jagged mouth slits, and broad swept wings dominates this pumpkin stencil. The design carves as widely spaced curved pierce-through sections that fan across both sides, leaving bold orange bridges to define the creature's torso and face. Lit from inside, the jack-o-lantern reads as a dark specter bursting outward. Cut the inner face details first before tackling the large wing panels so shifting your grip doesn't crack the delicate center column.
See template →
17. Scary Text Pumpkin Stencil
The word "Scary" is rendered in a dripping, horror-movie hand lettering style and set inside a speech bubble outline made of jagged, claw-like strokes in this hard pumpkin stencil. The letter forms themselves are cut through while the speech bubble border stays solid, so candlelight glows through the word while the ragged bubble outline frames it in orange. The thin descenders on the letters, particularly the tail of the "y" and the base of the "S," are the most fragile bridges; cut those last after the letter interiors are already free.
See template →
18. Haunted Tree Pumpkin Stencil
A gnarled, bare-branched haunted tree with an angry face hidden in its trunk dominates this expert-level pumpkin stencil, its dozens of thin branch tips and the snarling mouth and eye details forming an intricate web of cuts. When lit, the branching silhouette glows against the pumpkin's skin with dozens of narrow passages of light. Work from the outermost branch tips inward toward the trunk face so the stencil sheet holds its shape while you cut the trickiest inner details last.
See template →
19. Mummy Pumpkin Stencil
A mummy's head and shoulders rise from a base of wrapping strips in this expert pumpkin stencil, the face emerging through layered horizontal and diagonal bandage cut-outs that reveal a single visible eye and a grimacing mouth. The design is dense with interlocking cut shapes separated by thin strips of uncut pumpkin that simulate gauze wrapping. Work from the face outward, completing the eye and mouth details before tackling the long bandage strips so the central features stay stable throughout.
See template →
20. Flying Bats Pumpkin Stencil
Five bats in mid-flight are scattered across the pumpkin face in this hard pumpkin stencil, ranging from a large swooping bat in the upper left down to a small one at the lower right, each drawn with jagged, pointed wing edges and tiny body details. All five bats are cut through as separate open shapes, so candlelight spills through each one individually and the pumpkin reads as a night sky full of swooping shadows. Cut the smallest bottom-right bat first while the pumpkin surface is fully rigid, then work upward to the largest.
See template →
21. Witch Silhouette Pumpkin Stencil
A full-length witch silhouette fills this jack-o-lantern pumpkin stencil: pointed hat, flowing robes, and a broomstick are all rendered as pierced cut-through shapes, with the surrounding robe fabric left as solid orange pumpkin wall. On the lit pumpkin the broomstick and cloaked figure read as glowing orange forms against a dark background. The witch's hat brim is a narrow horizontal bridge; cut that piece last and work inward from the wider robe sections to keep it from snapping under tool pressure.
See template →
22. Scarecrow Face Pumpkin Stencil
Two large round eyes with small eyebrow hooks above each, a pair of pointed teardrop nostrils, and a wide toothy grin with sharp downward-pointing fangs give this scarecrow face its slightly sinister character on this easy pumpkin stencil. All cut pieces are chunky and well-separated, making this a comfortable carve despite its spooky look. To keep the row of fang tips from chipping, make the two vertical cuts on each fang before the horizontal base cut that frees the piece.
See template →
23. Witch on Broomstick Moon Pumpkin Stencil
A classic Halloween silhouette of a witch on a broomstick crossing a full moon fills this pumpkin stencil. The large circle is carved out as a single open pierce, leaving the witch and cat riding the broom as raised orange pumpkin forms within the glowing moon. Wisps of hair or cloak stream behind the figure, and a black cat perches at the broom's tip. Because the witch's streaming hair separates into narrow strips, cut those final wisps with a fine detail blade and work from the broom tip toward the figure to avoid breaking them.
See template →
24. Skull Pumpkin Stencil
Two wide almond-shaped eye sockets with small fang-like lower details, a paired nasal cavity of two thin vertical slots, and a broad rectangular mouth with chunky upper and lower teeth make up this straightforward skull pumpkin stencil. The five main shapes are spread across the face with generous pumpkin skin between them, making this a stable carve. Cut the narrow nasal slots first since they are easiest to lose track of; follow with the eye sockets, and save the wide mouth for last so the pumpkin face remains solid while you finish the upper details.
See template →
25. Dracula Pumpkin Stencil
A cartoonish Dracula figure stands arms raised and cape spread wide in this hard pumpkin stencil, with pointed ears, a brow furrowed in menace, two prominent fangs, and clawed hands at the tips of the outstretched arms. The head, torso, and cape folds are rendered as separate cut-through pieces held together by solid pumpkin outlines, so the finished jack-o-lantern reads as a sharp, angular vampire silhouette when backlit. Cut the claw tips at each arm end first since they are the most isolated and will be hardest to control once the large cape areas are removed.
See template →