🎃

🎃25 designs · Updated for 2026

No Carve Traditional Pumpkin Faces

Looking for no carve traditional pumpkin faces? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.

Browse 25 designs ↓

★★★★★4.9/5from 2,400+ carvers✓ No watermark✓ Print-ready PDF

🆓

100% free

Every design is a free download. No account, no catch.

⚡

Print-ready PDF

One click to a clean PDF, pre-sized for a standard 8.5×11 sheet.

✂️

Carve tonight

Print, tape it to your pumpkin, trace the lines, and start carving.

25 no carve traditional pumpkin faces

Beginner or pro, there's something on this page for you.

Easy

Mini Face with Twin Teeth

Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.

Free PDF

Easy

Turnip Triangle Surprise Face

A nod to the original Irish lanterns: a simple startled face with two triangle eyes and a small arched mouth, designed to suit a turnip, rutabaga, or small pale pumpkin. All three openings cut straight through the wall. Root vegetables are much denser than pumpkins, so hollow the inside generously first and use short, firm saw strokes; on a regular pumpkin this carves in minutes.

Free PDF

Easy

Triangle Eyes and Crescent Grin

A bold traditional design pairing two big triangle eyes with a wide crescent grin crossed by chunky square teeth top and bottom. All openings pierce the wall completely, so the face burns bright on any pumpkin, including green or white varieties. An easy carve with generous shapes; free the tooth gaps first, then cut the long smile curve in sections so the grin keeps its clean sweep.

Free PDF

Easy

Round Eyes and Two Short Teeth

Round eyes, a small triangle nose, and a broad grin with two stubby square teeth give this jack-o'-lantern a warm, welcoming personality. The eyes, nose, and mouth are cut through, while the two little teeth stay attached along the top of the smile. On this easy carve, cut carefully around each tooth so it remains anchored to the wall; everything else is simple circles and one flowing mouth curve.

Free PDF

Easy

Triangle Eyes and Long O Mouth

Two crisp triangle eyes sit above a tall oval mouth frozen mid-gasp, the three-hole formula that has decorated doorsteps for generations. All three shapes cut straight through, so the whole face can be finished in minutes, making it the ideal last-minute design. Cut each triangle with three straight strokes that overlap slightly at the corners so the points pop out cleanly.

Free PDF

Easy

Tall Eyes and Twin Upper Teeth

The timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad smile notched by two square upper teeth. Every element cuts straight through with simple lines, making this the ideal very first pumpkin carve. Use long, steady saw strokes and keep the blade perpendicular to the shell so the triangle points stay sharp, then pop each piece out from the inside.

Free PDF

Easy

Tall Triangles and Open Smile

Two tall triangle eyes and a wide open smile with a single pointed upper notch make up this timeless jack-o'-lantern face, shown here glowing warmly from an ivory white pumpkin. Every shape is a straightforward cut-through with no attached pieces to protect. It is as easy as carving gets: make long straight cuts for the triangles and let the knife follow the smile's curve in smooth strokes, and it looks brilliant on white or orange pumpkins alike.

Free PDF

Easy

Leaning Eyes and Square Teeth

The timeless jack-o'-lantern: two leaning triangle eyes, a triangle nose, and a huge crescent grin interrupted by two blocky square teeth, one up and one down. Everything is a straightforward cut-through, which is exactly why this face has been a first-timer favorite for generations. Cut the mouth last and leave the tooth tabs generous; you can always trim a tooth thinner, but you cannot put pumpkin back.

Free PDF

Easy

Wide Crescent and Short Teeth

The timeless jack-o'-lantern: two triangle eyes, a triangle nose, and a wide crescent grin broken by a few short square teeth left in place. Every shape is a straightforward cut-through, making this an ideal first carve of the season. Cut each triangle in three straight strokes that meet at the corners, and leave the teeth generous so they do not snap off.

Free PDF

Easy

Triangle Face and Lower Teeth

The most traditional face in the patch: two triangle eyes, a triangle nose, and a wide smile interrupted by two square teeth rising from the lower lip. All five shapes cut straight through with no curves to fight, making this an ideal first carve. Push the saw in straight vertical strokes and finish each triangle corner cleanly from both sides before popping the piece out.

Free PDF

Easy

Tall Triangles and Twin Teeth

The timeless jack-o'-lantern: two tall triangle eyes, a smaller triangle nose, and a wide friendly smile interrupted by two blocky teeth, one dropping from the top lip and one rising from the bottom. All four shapes are cut straight through for that classic warm glow. This easy pattern is ideal for a child's first supervised carve; make each triangle in three straight cuts and push the pieces out from inside the pumpkin.

Free PDF

Easy

Diamond Nose and Three Teeth

This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.

Free PDF