Similar pumpkin stencils
View all stencils βAbout this stencil
The Scarred Sneer pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A menacing sneer built from two uneven glaring eyes, a small skull-like nose, a crooked mouth of jagged teeth, and three claw-slash marks raking each side of the face. All shapes pierce through, and the mismatched features do the intimidating. A medium carve; cut the six narrow slashes first with single confident strokes, then work the mouth teeth before opening the larger eye shapes. It makes a fun jack-o'-lantern design for Halloween night. It is rated Intermediate. Estimated time: 55-85 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 55-85 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the two unequal eyes. Cut both regions marked 1. Preserve the low left crescent and much taller inward-curved right eye. Keep the central white face bridge intact.
- Open the paired nostrils. Cut both regions marked 2. Keep their pointed tops and rounded lower ends, with a full white separator between the two small openings.
- Add six diagonal cheek marks. Cut all six regions marked 3, three on each side. Follow their unequal curves and opposite slopes. Preserve the white shell between neighboring marks.
- Retain the three upper teeth. Cut region 4 around all three upper teeth. Follow the high left mouth corner and low rounded bottom. Preserve each full tooth attachment and support the long plug before finishing.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateThe Sinister Snarl Pumpkin Stencil
Two sharply slanted triangle eyes glare above a wide jagged mouth lined with seven pointed fangs, giving this face a classic menacing snarl. Every element is cut fully through, and the zigzag mouth does most of the work, so accuracy there pays off. Cut each tooth as two separate straight strokes meeting at the point instead of dragging the saw around the corner, and the grin stays razor sharp.
AdvancedThe Crooked Leer Pumpkin Stencil
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.
Beginner-friendlyThe Jagged Menace Pumpkin Stencil
A fierce horror face made of three bold shapes: two sharply slanted eyes that hook downward like angry slashes, and a wide zigzag mouth full of jagged points. Everything is cut through, so the whole face blazes with candlelight and reads clearly from the street. It is an easy carve despite the menacing look; use long straight cuts for each zigzag segment and the aggressive angles practically draw themselves.
AdvancedGrim Growler Pumpkin Stencil
Sharp slanted eyes glare from under heavy brows above a narrow triangle nose and a long menacing grin lined with thin vertical teeth. The eyes, nose, and mouth are cut through, and the row of skinny tooth bridges is what earns the hard rating. Cut the mouth outline first, then remove the gaps between teeth one at a time so the fragile strips never take sideways pressure.
IntermediateGritted Grimace Pumpkin Stencil
A grumpy jack-o'-lantern scowls with slanted, brow-slit eyes, a small triangle nose, angled cheek slashes, and a downturned mouth broken into square gaps. Every element is cut through, with the mouth's rind bridges creating the clenched, gritted-teeth effect. The thin brow and cheek slits earn the medium rating: make each slit with two close parallel cuts and pop the sliver out from inside the pumpkin, since pushing from outside can crack the narrow channel wider.
IntermediateMidnight Menace Pumpkin Stencil
A classic evil jack-o'-lantern with steeply slanted triangle eyes glaring downward and a wide jagged mouth of uneven fangs, some long and some short for extra menace. All shapes are pierced through for a fiery glow. Rated medium because of the zigzag mouth; cut each fang point with two clean strokes meeting at the tip, and bevel the eye edges outward so more light escapes upward.





