Halloween Pumpkin Carving Contest · Starts October 1st · $500 in prizes
See the contest →
+ Upload
🎃
🎃14 designs · Updated for 2026

Toddler Traditional Pumpkin Designs

Looking for toddler traditional pumpkin designs? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.

Browse 14 designs ↓
★★★★★4.9/5from 2,400+ carvers✓ No watermark✓ Print-ready PDF
🆓

100% free

Every design is a free download. No account, no catch.

⚡

Print-ready PDF

One click to a clean PDF, pre-sized for a standard 8.5×11 sheet.

✂️

Carve tonight

Print, tape it to your pumpkin, trace the lines, and start carving.

14 toddler traditional pumpkin designs

Beginner or pro, there's something on this page for you.

Diamond Nose and Three Teeth — toddler traditional pumpkin designs
Easy

Diamond Nose and Three Teeth

This is the timeless jack-o'-lantern: two triangle eyes, a diamond nose, and a wide crescent grin interrupted by three blocky square teeth, one hanging from the top lip and two rising from the bottom. Everything except the teeth is cut through, with the teeth left as standing tabs of shell. It is an easy, forgiving first carve; cut toward each tooth from both sides rather than sawing across it, so the tabs never take sideways pressure.

Free PDF
Broad Grin with Five Teeth — toddler traditional pumpkin designs
Easy

Broad Grin with Five Teeth

Two chunky triangle eyes sit above a broad zigzag grin, where five blocky teeth alternate along the top and bottom of the smile. Everything cuts fully through, and the oversized features make this a great pick for a big pumpkin that needs to be seen from a distance. Carve the mouth as one long opening and leave each tooth attached to the rim, sawing the tooth notches last so they stay sturdy.

Free PDF
Classic Grin with Two Teeth — toddler traditional pumpkin designs
Easy

Classic Grin with Two Teeth

The timeless jack-o'-lantern: two triangle eyes, a triangle nose, and a wide curved grin interrupted by two chunky square teeth, one on top and one on the bottom. Every feature is pierced straight through for maximum glow. This easy pattern is the classic first carve; angle each triangle cut slightly toward the center of the shape so the plugs pop out cleanly, and leave the tooth blocks generous so they do not snap.

Free PDF
Tall Triangles and Broad Smile — toddler traditional pumpkin designs
Easy

Tall Triangles and Broad Smile

This is the timeless jack-o'-lantern: two tall triangle eyes, a small triangle nose, and a broad crescent smile, all cut straight through the shell. With only four openings and no fragile details, it is an ideal first carve for a new pumpkin carver. Poke pilot holes at each triangle corner before sawing so your straight lines meet exactly where they should.

Free PDF
Wide Smile With One Tooth — toddler traditional pumpkin designs
Easy

Wide Smile With One Tooth

Made for short, squat pumpkins, this low-profile face uses two simple triangle eyes and a wide shallow smile interrupted by a single square upper tooth. All three openings are pierced straight through, and the small piece count keeps it firmly in easy territory. Cut the mouth last and leave the tooth notch for the very end, slicing down each side of it so the little square stays put.

Free PDF
Long Oval Surprise Face — toddler traditional pumpkin designs
Easy

Long Oval Surprise Face

Two round eyes, a small triangle nose, and a tall oval mouth give this design a permanently startled expression, sized for long narrow pumpkins. Just four openings are cut through, which is why it works so well for beginners and quick porch displays. Scoop the big oval mouth in stages rather than one deep cut, and the tall shape will stay smooth from top to bottom.

Free PDF
Wide Smile on a Warty Pumpkin — toddler traditional pumpkin designs
Easy

Wide Smile on a Warty Pumpkin

Two big triangle eyes and a huge upturned crescent smile turn any bumpy heirloom pumpkin into a cheerful classic jack-o'-lantern. All three shapes are simple cut-through openings, so warts and ridges on the shell only add character around the glow. This easy pattern is perfect for a first carve; make long smooth strokes along the smile and pop each triangle out in one clean piece.

Free PDF
Peaked Eyes and Offset Teeth — toddler traditional pumpkin designs
Easy

Peaked Eyes and Offset Teeth

A timeless porch jack-o'-lantern with peaked half-round eyes, a triangle nose, and a broad smile broken by offset square teeth on the top and bottom lip. Every element is a full cut-through, so it lights up brilliantly at dusk. Cut the mouth last and remove it in tooth-sized sections; sawing the whole smile as one piece puts stress on the little tooth tabs.

Free PDF
Triangle Eyes and Twin Teeth — toddler traditional pumpkin designs
Easy

Triangle Eyes and Twin Teeth

The timeless jack-o'-lantern: two bold triangle eyes, a matching triangle nose, and a wide friendly smile with two square teeth breaking the curve. Every feature is cut fully through, leaving the rest of the pumpkin smooth so the glowing shapes do the talking. Straight lines make this an ideal easy carve; score the triangles with a ruler edge first and the cuts will fall right in place.

Free PDF
Uneven Eyes and One-Tooth Grin — toddler traditional pumpkin designs
Easy

Uneven Eyes and One-Tooth Grin

A timeless porch-ready jack-o'-lantern with two slightly uneven oval eyes, a small triangle nose, and a long friendly smile broken by a single square tooth. All four openings are generous cut-through shapes, so beginners can saw steadily without worrying about fragile bridges. Angle your blade slightly outward as you cut so each piece pops free toward you and the glow spreads wider at night.

Free PDF
Side-Glancing Two-Tooth Smile — toddler traditional pumpkin designs
Easy

Side-Glancing Two-Tooth Smile

This classic jack-o'-lantern face pairs two round side-glancing eyes with a triangle nose and a wide grin showing two blocky teeth. Every feature is cut all the way through, so candlelight pours out of the openings while the rest of the rind stays untouched. The shapes are big and forgiving, making this a perfect first carve; make small relief cuts at the corners of the smile so your blade can turn cleanly.

Free PDF
Simple Glowing Cross — toddler traditional pumpkin designs
Easy

Simple Glowing Cross

A tall Christian cross glows from the center of the pumpkin, with slightly tapered arms that give the shape a hand-hewn, rustic feel. The entire cross is cut through, so candlelight pours out in one bold symbol while the rest of the shell stays untouched. Since this is an easy single-opening design, take the vertical beam in two long, steady strokes and the crossbar last to keep every edge crisp.

Free PDF

Frequently asked

How long do these pumpkin designs take?+

Easy designs take 20–40 minutes. Hard and expert designs can take 2+ hours, but the result is worth it.

What size pumpkin works best for toddler traditional pumpkin designs?+

A medium-sized round pumpkin (about 8–10 inches tall) works for most pumpkin designs. Larger pumpkins make detailed cuts easier.

How do I transfer the pumpkin design to my pumpkin?+

Print the PDF at 100% scale, tape it to your pumpkin, and poke through the lines with a pin or pencil. Then connect the dots with your knife.

Browse related

Parent categories

Other synonyms

Other themes

Other difficulties

Top lists

🎃

Pick a design, print it, and light up the porch.

Browse designs
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.