10 Vintage Pumpkin Templates

Explore 10 distinct vintage pumpkin templates from the stencil library.

1. Vermont Pumpkin Stencil
Vermont's narrow, elongated state outline is pierced as a single open shape on this easy pumpkin stencil, showing the slightly irregular wavy eastern border, the smoother western edge along Lake Champlain, and the small northern bump where the Northeast Kingdom juts upward. Lit, it glows as a tall vertical window of light. Because Vermont's outline runs close to the top of a typical pumpkin curve, tape the stencil with the northern bump positioned at least an inch below the stem base to leave enough wall thickness.
See template →
2. Winged Heart Pumpkin Stencil
A large heart with feathered wings spread wide anchors this hard pumpkin stencil, with a scrolling banner ribbon below carrying decorative curl accents. The heart is kept solid as pumpkin flesh while the wing feather gaps and banner interior are cut through, creating a tattoo-style composition that glows with intricate layered detail. The individual feather separations along each wing are narrow and numerous; carve them starting at the outermost wingtip and working toward the heart so the wing stays attached to the body of the pumpkin longest.
See template →
3. Skeleton in Bowler Hat Pumpkin Stencil
A cartoon skeleton in a bowler hat tips its hat with one bony hand while its round skull grins with simple triangular nose and dot eyes on this Halloween pumpkin stencil. The ribcage, arm bones, and pelvis are each rendered as small separate cut islands surrounded by pumpkin skin. Because the design is built from many floating cutout islands, carve the larger open bone shapes in the torso before tackling the small finger and toe segments, so the pumpkin stays structurally sound while you work the finer extremities.
See template →
4. Rock Singer Pumpkin Stencil
A vintage rock-and-roll singer with a greased pompadour and an open-mouthed grin holds a microphone to his lips on this Halloween pumpkin stencil, his body squared up in a wide stance with legs apart and a guitar strap across the chest. The figure is built from large and medium pierced sections with solid orange bridges defining the face, hair curl, and clothing folds. When lit, the silhouette reads as a golden retro performer mid-song. Cut the face details, including the open mouth and eye lines, before removing the large chest and torso sections that support the surrounding wall.
See template →
5. Pharaoh Death Mask Pumpkin Stencil
An Egyptian pharaoh death mask stares straight out of this expert pumpkin stencil, showing the broad striped nemes headdress with its pleated side panels and forehead uraeus cobra, plus a detailed face with almond-shaped eyes, straight brows, a defined nose, and a zigzag collar at the neck. The face details are held in thin skin bridges while the headdress stripes and surrounding areas are pierced through. Carve the delicate uraeus cobra at the top first since it is the most isolated element and easiest to cut without torque on neighboring sections.
See template →
6. Queen Portrait Pumpkin Stencil
An elderly queen in full regalia looks forward from this pumpkin stencil, her curly hair framing a detailed face with distinct brows, eyes, and lips, topped by an ornate crown bearing a cross, leaf shapes, and decorative elements. The portrait is built from dozens of small and medium cut sections across the hair, face, and jeweled bodice, with thin orange bridges holding the likeness together. Begin with the smallest crown ornament shapes at the very top before moving to the face, since removing the large hair sections early would flex the wall and risk tearing the delicate facial bridges.
See template →
7. Sombrero Pumpkin Stencil
A wide-brimmed sombrero fills this pumpkin stencil, its high rounded crown pierced as one large cutout and the broad brim divided by a decorative band of repeating V-shaped notches that form a row of open triangles along the lower edge. The hat brim is the negative-space opening, and the triangular notches add festive detail within it. Cut the triangular notches along the band first, from the center outward in each direction, so the thin pumpkin teeth between them remain stable while you remove the larger crown and brim sections.
See template →
8. I Love North Dakota Pumpkin Stencil
North Dakota's pumpkin stencil delivers the "I [heart] ND" message in bold rounded type across two rows, the heart flanked by a slender "I" above and the letters "ND" below. The "D" is an upright with a large curved lobe on the right, and its wide open interior means you remove a single large piece of pumpkin skin. Score the straight left edge of the "D" first, then cut the curve in one sweeping arc to keep the lobe smooth and symmetrical on the finished jack-o-lantern.
See template →
9. I Love Idaho Pumpkin Stencil
Idaho's "I Love ID" stencil follows the familiar two-row grid with a block I and heart on top, and the letters I and D below. The lower I is a simple open rectangle, while the D is a large rounded-rectangle counter that needs its curved interior removed as one piece. Because the D's inner oval is large, make a relief cut at the top before removing to avoid the pumpkin wall flexing and cracking as the piece comes free.
See template →
10. I Love Kentucky Pumpkin Stencil
Kentucky's "I Love KY" stencil uses the two-row grid with block I and heart above, and the letters K and Y below in rounded block type. The Y's upper two diagonal arms and straight lower stem form a clean open silhouette with no counters, while the K mirrors the structure described for the Kansas stencil. When lit, both bottom letters glow as bright filled shapes. For the Y, make the two upper arm cuts first, meeting at the center junction, then cut straight down the stem to complete the shape cleanly.
See template →