🎃

🎃45 designs · Updated for 2026

Homemade Traditional Pumpkin Printables

Looking for homemade traditional pumpkin printables? You're in the right place. Print at 100% scale, tape it to your pumpkin, and poke through the lines with a pin.

Browse 45 designs ↓

★★★★★4.9/5from 2,400+ carvers✓ No watermark✓ Print-ready PDF

🆓

100% free

Every design is a free download. No account, no catch.

⚡

Print-ready PDF

One click to a clean PDF, pre-sized for a standard 8.5×11 sheet.

✂️

Carve tonight

Print, tape it to your pumpkin, trace the lines, and start carving.

45 homemade traditional pumpkin printables

Beginner or pro, there's something on this page for you.

Expert

Double Bars and Zigzag Teeth

An elaborate jack-o'-lantern face built from layered geometry: triangle eyes barred with double rind strips, arched claw-like brows, diamond accents down the cheeks, and a wide zigzag mouth of interlocking teeth flanked by curling flame flourishes. The many openings are cut through around a lattice of thin surviving rind. This expert design demands a sharp fine-tooth saw and a plan: cut from the center outward, finishing the outer flourishes last while the wall is still strong.

Free PDF

Intermediate

Plain Cross with Nine Rays

A plain cross stands at the center while nine tapered rays of light fan outward around it, like a sunburst breaking through. This shaded design is carved on a continuous wall, shaving the skin away so the cross and rays glow warmly with no pierced openings, which suits a reverent, softer look. Shave the cross to an even depth first, then taper each ray shallower toward its tip so the light appears to fade outward.

Free PDF

Expert

Triangle Ring and Jagged Grin

An ornate expert-level face framed by a full ring of small triangle cutouts circling the pumpkin, with chevron-crested brows, barred flame-shaped eyes, a diamond nose, and a huge jagged grin holding fourteen zigzag teeth. Everything pierces through, so the finished lantern sparkles from every angle like carved lace. Plan your order: punch the border triangles first while the wall is rigid, then work inward, saving the long fragile grin for the very end.

Free PDF

Hard

Vintage Arches and Round Grin

Arched triple line brows curl above big eyes divided by rind bars, a long triangle nose drops between them, and a huge grin shows a full row of rounded teeth with dotted curlicue accents swirling at each cheek. All the openings are cut through in a cheerful retro style straight off an old holiday postcard. Rated hard for its many small dots and thin brow lines, it rewards a fine detail saw and a drill for the dots.

Free PDF

Hard

Cross in an Oval Ray Field

An ornate flared cross stands at the center of an oval field of sunburst rays that radiate outward to the design's edge. It is carved entirely in continuous-wall relief: the cross is left raised with beveled edges while the rays are shaved to alternating depths so light plays across the whole medallion. This hard shading piece rewards patience, so establish the cross outline deep and clean first, then carve every ray from the cross outward to keep the bevels crisp.

Free PDF

Expert

Radiant Cross and Lower Leaves

An ornate flared cross rises from a bed of scrolling leaves while sunburst rays fan out behind every arm, all carved in layered relief. Nothing pierces the wall: the cross, rays, and foliage are shaved at multiple depths so the design reads as glowing sculpture with crisp raised borders. This expert shading project demands patience, so map your three depth levels first and always carve the background rays before refining the cross's beveled edges.

Free PDF

Hard

Barred Eyes and Serrated Grin

This wicked traditional face stacks barred triangle eyes with heavy slanted brows above a huge serrated grin, then flanks the mouth with rows of small wedge and diamond accents across both cheeks. Everything is cut through, and the eye bars are thin strips of shell left inside each triangle. Cut on both sides of each eye bar before removing the surrounding pieces, and save the tiny cheek diamonds for last.

Free PDF

Expert

Moon Profile and One Star

A serene man-in-the-moon profile fills a broad crescent, his closed-eye face, nose, and lips sculpted in layered relief within the shaved moon shape, while a single five-pointed star glows beside him. The moon is carved as continuous-wall shading at multiple depths and only the star area is thinned to shine brightest. This expert piece is all about depth control; rough in the crescent first, then sculpt the facial features gradually, checking the glow with a light as you go.

Free PDF

Hard

Barred Triangles and Grid Grin

A grinning classic face where each triangle eye is split by a vertical bar of rind, the diamond nose sits between rows of small diamond cheek cutouts, and the huge smile is divided into a grid of rectangular tooth windows. Everything is pierced through, creating a lantern that flickers from dozens of openings. Rated hard because those rind bars and grid struts are fragile; cut away from each bar and never twist the blade near them.

Free PDF

Intermediate

Triangle Eyes and Six Diamonds

This elevated take on the traditional face pairs slanted triangle eyes topped with thin brow slits, a triangle nose, and a deep zigzag grin, then adds three small diamond cutouts on each cheek for extra sparkle. Every element is pierced through the wall. The brow slits and little diamonds are what push it to medium; cut the big shapes first, then handle each diamond with a narrow saw, working point to point so they stay crisp.

Free PDF

Easy

Mini Face with Twin Teeth

Sized for small pumpkins, this friendly face uses two triangle eyes, a tiny triangle nose, and a rectangular mouth with two square teeth notched into the top edge. All openings cut straight through, and the compact layout keeps every feature close together so it reads clearly on a little gourd. On thin-walled mini pumpkins, use a fine serrated blade and light pressure to avoid splitting the shell between cuts.

Free PDF

Intermediate

Almond Eyes and Seven Teeth

A wide, low jack-o'-lantern face with sly almond-shaped eyes, a small triangle nose, and a long jagged mouth packed with alternating square teeth top and bottom. Everything is pierced through, and the horizontal layout suits squat, wide pumpkins. At medium difficulty the tooth row is the main work; cut the mouth's outer outline first, then remove the gaps between teeth one at a time so each block keeps support while you work.

Free PDF