The 2026 contest winners are inGrand Prize, People's Choice and Most Creative, all crowned.
Winners →
+ Upload
@ai_concepts
Aug 29, 2026
Clover the Sweet Bunny, a painted no-carve pumpkinAI
0

Report this carving

Tell us what is wrong. Reports are private.

Clover the Sweet Bunny

A white bunny face with pink inner ears, a button nose, and long whiskers is painted straight onto this pumpkin, no knife required. Base-coat the face and ears in two layers of white acrylic, let them dry fully, then add the pink, the black eyes, and the whisker strokes with a liner brush. Since nothing is cut, this no-carve pumpkin lasts for weeks indoors, making it a great classroom or toddler-friendly project.

No ratings yet · Sign in to rate
EasyAnimalsCuteNo-Carve
bunnyrabbitpetanimalpaintedno-carvecutekid-friendly

Save this design for carving night, then share a photo of your own jack-o'-lantern once it's glowing.

Comments (0)

  • No comments yet. Be the first.

Our tips for carving a similar design

The whole charm here is a clean white bunny face floating on bare orange skin, so the trick is layering opaque white paint until the face and ears read crisp, then adding just a few small accents. Because nothing is cut, plan your shapes in pencil first and let each paint layer dry fully before the next. Keep the pink ears, black eyes, nose, and whiskers minimal so the face stays sweet and simple.

From pumpkin to porch

  1. Clean and sketch the layout

    Wipe the pumpkin with a damp cloth and dry it so paint grips well. Pick the flattest, cleanest side facing out and lightly pencil the round face, two tall ears, eyes, nose, and mouth. Keep the face centered low on the belly where the surface is smooth. Step back and check the shapes look balanced before you commit to paint.

  2. Base-coat the white in two layers

    Use white acrylic and a medium flat brush to fill the face circle and both ears. The first coat will look streaky and thin, and that is normal. Let it dry completely, then add a second coat for solid, opaque white. Full drying between coats keeps the edges clean and stops the orange from bleeding through.

  3. Add the pink inner ears and nose

    Once the white is fully dry, load a smaller brush with pink and fill an inner shape inside each ear, leaving a white border all around. Paint a small rounded triangle for the nose in the same pink. Keep the pink slightly inside the white so it looks tucked in rather than spilling over. Let it dry before moving on.

  4. Paint the eyes and mouth

    Switch to black and a fine liner brush for two oval eyes, then add a tiny white dot in each once the black dries to make them sparkle. Draw a short line down from the nose and a small curved smile at the bottom. Keep the eyes evenly spaced and a little high on the face for that gentle bunny look. Rest your painting hand on a folded towel to steady your strokes.

  5. Pull the whiskers

    With the liner brush and thin black paint, pull three long whiskers out from each cheek in one smooth stroke each. Start at the cheek and lift the brush as you go so the line tapers to a point. Space them so they fan out slightly rather than running parallel. Let everything cure for a few hours before handling.

  6. Style and photograph

    Set the finished pumpkin on a windowsill or counter in soft daylight to show off the crisp white face. Since nothing is cut, it will last for weeks indoors, so it is perfect for a classroom shelf or a toddler's room. If you want a nighttime glow, tuck a battery LED behind it rather than inside. Snap your photo from straight on so the symmetrical face reads clearly.

Written with AI to match this design

Gather your supplies

Check things off as you get ready.

Work on a stable surface, keep your free hand out of the cutting path, and have an adult handle sharp tools.

Three levels of light

  • Leave intact

    All the bare orange skin around the bunny stays untouched and dark, framing the painted face.

  • Peel & shade

    This is a no-carve design, so there is no peeling; if you want a soft glow you could lightly scuff a thin halo of skin behind the head instead.

  • Cut through

    Nothing is cut on this design, keeping it sturdy and long lasting; add a battery LED behind the pumpkin if you want extra brightness.

Learn the carving basics

Before you start cutting

Do I really need two coats of white?

Yes, one coat of white acrylic almost always looks streaky and lets the orange show through. Let the first coat dry fully, then add the second for a solid, bright face. The clean white is what makes the bunny pop against the pumpkin.

Can I do this with a real pumpkin or should I use a faux one?

Both work well since there are no cuts to rot or collapse. A real pumpkin painted this way lasts a few weeks indoors, while a foam or faux pumpkin can be saved and reused every year. For a classroom or toddler project, faux is the safest long-term choice.

How do I get the whiskers thin and steady?

Use a fine liner brush and thin your black paint slightly with water so it flows. Rest your hand on a folded towel, start at the cheek, and lift the brush as you pull outward to taper the line. Practice a stroke or two on paper first to warm up.

Your take belongs here, too.

Changed a detail? Made it simpler? Share a photo of your version and tell the community what worked.

Share your pumpkin

Want more designs like this? Browse our full library of pumpkin carving ideas, or pick a free printable stencil. Every pattern and template in our own collection is free to print at home.

More pumpkins like this

Painted Pip the Pink Bunny, a painted no-carve pumpkin
AI
Painted Pip the Pink Bunny
@ai_concepts0
Buttons the Floppy-Eared Bunny pumpkin carving
AI
Buttons the Floppy-Eared Bunny
@ai_concepts0
Biscuit the Smiling Golden Retriever, a painted no-carve pumpkin
AI
Biscuit the Smiling Golden Retriever
@ai_concepts0
Clover the Cottontail Bunny pumpkin carving
AI
Clover the Cottontail Bunny
@ai_concepts0
Chomp the Grinning Alligator, a painted no-carve pumpkin
AI
Chomp the Grinning Alligator
@ai_concepts0
Marigold the Painted Retriever, a painted no-carve pumpkin
AI
Marigold the Painted Retriever
@ai_concepts0
Cookie the Smiling Corgi, a painted no-carve pumpkin
AI
Cookie the Smiling Corgi
@ai_concepts0
Peeking Pug No-Carve Pumpkin
AI
Peeking Pug No-Carve Pumpkin
@ai_concepts0
You've reached the end · 8 pumpkins
The Patch Report

Fresh pumpkins, in your inbox.

The best new carvings, ideas worth stealing, and how-tos for carving season. Short, seasonal, and gone by November.

A short email during carving season. Unsubscribe anytime. See our privacy policy.