Similar pumpkin stencils
View all stencils βAbout this stencil
This free Sun Meets Moon pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A tall crescent moon pairs with a four-ray sun whose points frame a solid circle of rind at its center, creating a striking celestial emblem. The crescent and the four triangular rays are pierced through, while the sun's middle disc stays attached as a floating island of pumpkin skin. At medium difficulty, cut the four rays individually and avoid nicking the center circle's edge, since that untouched disc is what makes the sun read. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 45-70 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 45-70 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the four sun rays. Open all four triangular regions marked 1 around the sun. Preserve their unequal lengths and the white separators beside the oval center.
- Open the tilted sun center. Cut region 2 around the slightly leaning oval. The entire dark center is one opening; retain the shell between it and all four separate rays.
- Finish the tall crescent. Cut region 3 along the broad left curve and deeply open right side. Leave its inward white area connected to the background. Support the curved plug and release both pointed ends with short cuts.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateMoonlit Halo Pumpkin Stencil
A bold crescent moon sits at the center of a decorative halo made of alternating circle and diamond openings. Everything is cut fully through, and the ring of small shapes scatters points of light around the big central glow for a celestial, almost boho look. Carve the crescent first, then work around the halo one shape at a time, spacing your cuts so the rind bridges between openings stay sturdy.
IntermediateShooting Star Trail Pumpkin Stencil
Four five-pointed stars in descending sizes sweep diagonally across the pumpkin, joined by a few small round dots that read like distant sparkles. Each star and dot is cut fully through, so the cluster twinkles convincingly once a candle goes in. The star points are what make this a medium carve; drill a starter hole at the center of each star and always saw from the middle out toward each tip to keep the points sharp.
IntermediateMoonbeam Fan Pumpkin Stencil
A tall crescent moon anchors the left side of this celestial design while a fan of seven teardrop rays arcs around its open curve like scattered moonbeams. Every shape is pierced through, so the crescent throws a big wash of light and the teardrops sparkle around it. Cut the crescent first for this medium design, then do the teardrops smallest to largest; angling your saw slightly outward makes each little petal pop out cleanly.
IntermediateClimbing Moons Pumpkin Stencil
Three crescent moons of different sizes climb diagonally across the pumpkin, trailed by six small round dots like distant stars. Every crescent and dot is pierced fully through, giving a modern, almost tattoo-style celestial arrangement once the candle is lit. The medium rating comes from the crescents' thin inner horns, so drill or poke each dot first for practice, then cut the crescents starting at the fat middle and working out toward each narrow tip.
IntermediateSix-Point Starburst
A bold six-pointed starburst fills the front of the pumpkin, with slim rays shooting out from a hexagonal core. The entire star is a single pierced opening, so the light pours through the center and tapers into each sharp point. Use slow, shallow saw strokes as you approach the ray tips, since those narrow points are the easiest spots to overcut.
Beginner-friendlyGalaxy Swirl Pumpkin Stencil
Two sweeping comma-shaped curves swirl around a round central core, suggesting a spiral galaxy spinning across the pumpkin. Just three openings are cut through the wall, so the design comes together quickly yet looks striking and modern when lit. Keep the tapered tails of each curve narrow as you saw; cutting from the wide end toward the thin tip gives you the most control over those graceful points.





