Similar pumpkin stencils
View all stencils →About this stencil
Download the Little Wyrmling pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A chubby, wide-eyed cartoon monster with curved horns, small bat-like wings spread to either side, a smiling mouth, and stubby feet sits inside a large circular opening on this easy pumpkin stencil. The circular background and small body details are pierced through, leaving the round monster figure itself as a solid silhouette at the center. Because the circular outer ring is cut away entirely, score and remove it in segments rather than one piece to keep control of the blade near the wing tips. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the face pieces first. Start in the center with the two sleepy eyes, the small rounded nose between them, the curved smile, and the tiny rectangle below it. These are the smallest, most fragile pieces; cut them slowly and lift each out before moving on.
- Cut the top arch. Cut the wide arched piece above the head. The white gaps on either side of it form the monster's two horns, so stay exactly on the line where the arch curves around each horn.
- Cut the upper side pieces. Cut the two large curved pieces flanking the head. Their inner edges scallop around the monster's bat-like wings; the small white spikes that poke into these pieces must stay attached.
- Cut the lower side pieces. Cut the two big pieces along the lower sides, easing around the wavy claw shapes on their inner edges. Keep the white gaps between upper and lower pieces intact; they are the bridges holding the design.
- Cut the bottom piece last. Finish with the small block at the bottom center between the monster's feet. Leave a corner attached until last, support it, and push it through.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedCartoon Wyvern Pumpkin Stencil
A small cartoon dragon perches in a rounded frame in this hard pumpkin stencil, showing a round-headed wyvern with stubby wings fanned behind it, a curled foreleg, and a spiky crest along the top of the frame. The body and wing details are a mix of open pierced sections and thin solid bridges, so the lit jack-o-lantern reveals the creature's rounded features glowing warmly inside the frame. Carve the two small oval eye cutouts and the tiny claw details first before removing the larger background areas, to keep the stencil stable during the fiddly work.
AdvancedGrinning Baby Dragon Pumpkin Stencil
A round cartoon dragon chick with large round eyes, stubby clawed feet, and a toothy grin fills this hard dragon pumpkin stencil, its body encircled by a looping scaly tail. The large circular body void and the face features are pierced through, while the narrow tail arc and the skin between the eyes form the connecting bridges. Cut the small interior eye and teeth details before opening up the large body circle, so those tiny islands are still supported by the surrounding wall.
AdvancedCartoon Dragon Pumpkin Stencil
A cartoon-style dragon stands upright with a crested head, open toothy grin, round eye, segmented belly, and a curling tail, all rendered in a chunky outline style on this pumpkin stencil. The body outline, crest spines, and scattered limb shapes are pierced through, while narrow bridges at the belly segments and tail curl remain solid to hold the design together. Cut the largest body cavity first, then the outer wing and limb fragments; save the tiny belly-rib slits for last so the structure stays rigid while you finish the surrounding cuts.
AdvancedBaby Dragon Pumpkin Stencil
A round-bodied baby dragon with oversized round eyes, stumpy clawed feet, and membrane wings spread to each side crouches in a compact, almost circular composition. The eyes are large pierced circles, the wings are open negative-space shapes with thin bony rib lines left intact, and small spiky horns crown the head. Lit from within, the glowing eyes become the focal point while the wing membranes glow warmly around the solid orange ribs. Carve the large eye circles first so you can verify the round cuts are centered before committing to the surrounding detail cuts.
IntermediateGarden Glider Pumpkin Stencil
A graceful dragonfly spreads four broad wings from a segmented body that runs straight down the pumpkin, with two small antennae curling from its head. Nothing is pierced; instead you shave the skin inside each wing and body segment so the shapes read as pale etched panels against the orange rind. Use a loop tool and keep the shave shallow so the wing outlines stay crisp.
Expert / ProDragon Pumpkin Stencil
A sinuous East Asian-style dragon coils from head to tail down the full height of this expert pumpkin stencil, with a horned head snarling at center, clawed feet gripping outward, a spine of dorsal spikes, and a long body that spirals in a tight S-curve to the bottom. Dense internal detail lines define scales and flame whiskers as narrow skin bridges throughout the figure. Carve the small head detail islands and claw tips first, then work down the body in sections, preserving the thin spine ridges that connect each body coil.