Similar to This
View all stencils →About this stencil
An angry demon jack-o-lantern face glares from this pumpkin stencil, its two sweeping brow-and-eye shapes angled sharply inward above a small curved nose and a wide jagged mouth bristling with pointed fangs. All five elements are cut through individually against the solid pumpkin face. Carve the two large brow-eye pieces before the mouth so the face stays rigid while you navigate the fine inward angles of each brow's inner corner. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery tea lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery tea light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and tea light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Homemory LED Tea Lights
24-pack of battery-operated lights
Battery-operated, flickering lights for a candle-like glow inside your finished pumpkin.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
- Expert / Pro
Devil with Trident Pumpkin Stencil
A stocky cartoon devil crouches in a lunging pose, holding a trident horizontally across his body while lightning bolts crackle at his feet. Horns, pointed ears, and a wide-toothed grin are all rendered in open cutouts, and the overall figure is surrounded by enough white space to read crisply as a lit jack-o-lantern. The three prongs of the trident sit very close together, so cut the two narrow gaps between them with a thin detail blade before removing the larger body sections to keep the surrounding pumpkin from flexing.
- Advanced
Little Devil Pumpkin Stencil
A small cartoonish devil figure with horn nubs, a pointed tail, and a three-pronged trident stands with a mischievous grin on this devil pumpkin stencil, the body and limbs carved as a tight cluster of connected cutouts. The trident tines and the arrowhead tail tip are the narrowest elements in the design. Carve those thin trident prongs and the pointed tail tip before cutting the larger body void, as opening the chest area too early weakens the wall near those delicate outer points.
- Advanced
Devil with Trident Pumpkin Stencil
A cartoon devil character stands full-body, holding a trident in one hand and sporting a curled pointed tail behind it, with two horns curving above its round head, arched eyebrows, stubby fang teeth, and small cloven-hoof feet visible below its tunic. The scattered cut pieces, including the trident tines, horns, and eyebrow slots, are separated by solid pumpkin bridges that outline each body part clearly when the jack-o-lantern is lit. Cut the three narrow trident tines first since they sit away from the body and are easiest to control while the surrounding pumpkin is still rigid.
- Expert / Pro
Demon Face Pumpkin Stencil
A demon face stares out from this expert pumpkin stencil, its two curved ram-like horns sweeping upward and outward, wild hair radiating from the sides, a bearded chin, and glaring deeply set eyes framed by heavy brow lines. Wing-like shoulder shapes flare wide at either side. The dense interlocking cuts form dozens of small glowing slivers around the retained face features, which remain as solid orange skin. Carve the narrow hair fringe pieces on each side first to release the outer sections, then work inward toward the eyes and beard.
- Expert / Pro
Devil in Flames Pumpkin Stencil
A muscular devil figure with curved horns and a snarling face is wreathed in jagged flame tongues that radiate outward from his body. The stencil uses large pierced areas for the flames and the open silhouette around his torso, while thin solid bridges define the horns, facial features, and the clawed hands. When lit, the jack-o-lantern blazes with a crescent of fire around a dark demonic form. Cut the outer flame spikes first so the central figure stays anchored while you work.
- Expert / Pro
Horned Devil Face Pumpkin Stencil
A snarling horned devil face bursts outward in this expert pumpkin stencil, its deeply detailed visage surrounded by wild flame-like hair, pointed ears, and curling scroll accents, while the eyes, nostrils, and sneering mouth with individual teeth are all cut through as fine interior negative spaces. Dozens of flame-fringe cuts radiate from the outer edge, creating a dense, fiery halo effect when lit. Work from the center face features outward toward the flame fringe, so the most delicate outer tips are cut last when you have the steadiest control.