Similar pumpkin stencils
View all stencils βAbout this stencil
Download the The Grinning Imp pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Two curved horns glow near the stem while slanted, angry eyes and a wide grin with square teeth complete this simple horned demon. Every feature is a pierced opening, and the shapes are big and forgiving, making it an easy carve with a wicked payoff. Cut the mouth as one band and notch the square teeth from the top and bottom edges so each tooth stays anchored to the wall. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 45-65 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 45-65 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open both curved horns. Cut both regions marked 1. Keep the lower left horn and higher right horn separate from the eyes. Follow each inward-curving notch and rounded lower edge.
- Cut the slanted triangle eyes. Cut both regions marked 2 along their unequal triangular outlines. Preserve the wide central bridge and all shell below the horn openings.
- Keep the two square teeth. Cut region 3 around the two upper teeth, retaining their broad lip attachments. Follow the deep rounded smile and higher right corner. Support the large mouth plug before completing its final edge.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyDemon Face Pumpkin Stencil
An angry demon jack-o-lantern face glares from this pumpkin stencil, its two sweeping brow-and-eye shapes angled sharply inward above a small curved nose and a wide jagged mouth bristling with pointed fangs. All five elements are cut through individually against the solid pumpkin face. Carve the two large brow-eye pieces before the mouth so the face stays rigid while you navigate the fine inward angles of each brow's inner corner.
IntermediateHorned Havoc Pumpkin Stencil
Two curved horns rise from the crown while fierce slanted eyes, each split by a solid bar of rind, glare above a jagged toothy grin. The horns, eyes, nose, and mouth are all pierced through, with the eye bars and pointed teeth left as uncut bridges. On this medium carve, do the eye interiors in two halves around each bar so the thin strip never bends.
Beginner-friendlyHollow Eyes Pumpkin Stencil
Two big blank circle eyes stare out beneath short angled brow slits, while the wide mouth is broken into six upright rectangular slots that glow like stitched or fenced-off teeth. Everything is cut through, and the plain round eyes with no pupils give the face its unsettling, vacant charm. The vertical mouth bars keep this an easy carve; cut every slot top-down in the same direction so the strips between them stay straight and even.
Beginner-friendlyThird Eye Visitor Pumpkin Stencil
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
AdvancedImp Face Pumpkin Stencil
A front-facing imp face fills this hard pumpkin stencil with layered detail: two curved horns at the top, heavy arched brow pieces over wide flame-shaped eyes, pointed ear flares on each side, a snarling open mouth with jagged teeth, and a chin medallion with a forked tip. The design reads as mostly open negative space on the pumpkin, with the narrow brow bridges and the gaps between each tooth being the most fragile elements. Carve the teeth last and use a very sharp detail blade to keep each pointed gap clean without breaking the thin skin separating them.
IntermediateCross-Eyed Chomper Pumpkin Stencil
Huge crossed googly eyes sit under raised brow slots while a gaping oval mouth shows off two goofy buck teeth, with freckle dots on each cheek. The eyes, brows, mouth, and dots are all pierced through, and the dark pupils and teeth are rind left attached inside the openings. Those attached pupils and teeth are the tricky bit; cut around them slowly and leave their connecting bridges generously wide.





