Similar to This
View all stencils →About this stencil
Two curved horns rise from the crown while fierce slanted eyes, each split by a solid bar of rind, glare above a jagged toothy grin. The horns, eyes, nose, and mouth are all pierced through, with the eye bars and pointed teeth left as uncut bridges. On this medium carve, do the eye interiors in two halves around each bar so the thin strip never bends. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateCurved Horns and Diamond Chin
A devilish face with two curved horns sprouting from the brow, narrow slanted eyes glaring beneath them, a wide grin studded with square teeth, and a diamond goatee stamped under the chin. Every piece is cut through so the whole sinister face burns bright. A medium carve with lots of payoff; cut the horn tips slowly since their curved points are the thinnest cuts, and finish with the easy diamond chin.
Beginner-friendlyTwo Horns and Square Teeth
Two curved horns glow near the stem while slanted, angry eyes and a wide grin with square teeth complete this simple horned demon. Every feature is a pierced opening, and the shapes are big and forgiving, making it an easy carve with a wicked payoff. Cut the mouth as one band and notch the square teeth from the top and bottom edges so each tooth stays anchored to the wall.
Expert / ProFlame Crown and Hooked Eyes
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Expert / ProFurious Eyes and Diamond Mask
A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area.
AdvancedBarred Eyes and Serrated Grin
This wicked traditional face stacks barred triangle eyes with heavy slanted brows above a huge serrated grin, then flanks the mouth with rows of small wedge and diamond accents across both cheeks. Everything is cut through, and the eye bars are thin strips of shell left inside each triangle. Cut on both sides of each eye bar before removing the surrounding pieces, and save the tiny cheek diamonds for last.
AdvancedAngular Mask and Eight Slits
This menacing bony mask glares through huge slanted eye sockets, flares a split skeletal nose, and bares a wall of long vertical teeth framed by curved fangs at each corner, with angular temple slashes radiating from the sides. The sockets, nostrils, tooth gaps, and slash marks are all cut through, leaving thin ribs of skin as the teeth. Hard-level advice: carve the eight narrow tooth slits with a fine blade and leave the outer fangs until the very end.