Similar to This
View all stencils →About this stencil
A low, wide cat face with menacing slanted eyes, a triangle nose, and long horizontal whisker slashes stretching across both cheeks. Each feature is pierced clean through, and the wide layout suits a squat, round pumpkin. Angle your saw to match the eye slant, and cut the long whiskers in two passes from the outside in so the thin slits stay crisp and even. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 45-70 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Shape the two slanted eyes. Cut both regions marked 1. Follow the high outer corners and broad lower curves. Keep the right eye slightly higher and preserve the wide center strip between the inward tips.
- Open the triangle nose. Cut region 2 along its wide top and long downward point. Keep all the surrounding shell intact; this face has no separate mouth opening.
- Finish four whisker openings. Cut all four regions marked 3, two on each cheek. Preserve their broad outer ends, narrower inner ends and unequal angles. Leave a continuous white strip between each pair and around the nose.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedAlmond Eyes and Twenty Tears
Two huge almond eyes stare straight out, each ringed by fanned lash bars above and a spray of teardrop cuts below, with attached pupils floating in the centers. The eye whites, brow strokes, and roughly twenty teardrops are all pierced, leaving the pupils and lash ribs as connected shell. This one earns its hard rating on the thin lash bars, so cut every slot outward from the eye and support the wall with your palm.
IntermediateStaring Eyes and Eight Wedges
Two enormous staring eyes dominate this design, each with a pupil tab left attached at the bottom rim, a curved brow arcing above, and short wedge-shaped rays radiating around the outside like a nervous twitch of light. There is no mouth, which makes the gaze even more unsettling. In this medium carve the pupil tabs are the key detail; cut around each pupil carefully so its bridge to the lower eyelid stays at least a half inch wide.
Beginner-friendlyBare Tree with Forked Branches
A gnarled bare tree glows from a wide split trunk up through forked, twisting branches, the classic haunted-forest silhouette in reverse. The entire tree shape is cut through as one connected opening, so light traces every crooked limb. It rates easy because the cuts are bold, but the branch tips narrow quickly; cut from each tip back toward the trunk and remove the waste in small pieces so no limb snaps off.
Beginner-friendlyUpright Cat Beneath a Crescent
An upright cat sits in silhouette beneath a small crescent moon, just two cut-through openings on the whole pumpkin. The cat's ears, curved back, and tail all come out as a single piece, leaving the shell dark around two clean glowing shapes. Trace the cat's outline slowly in one continuous cut and push the piece out from inside the pumpkin for the cleanest edge.
Beginner-friendlySeated Cat with Upright Tail
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact.
Beginner-friendlyThree Tombstones Under a Moon
A miniature midnight cemetery: three rounded tombstones of different heights glow along the bottom while a crescent moon and a scatter of small round stars shine above them. Every element is a simple cut-through, and the plain shapes make the scene read clearly from across the street. It is an easy carve; drill the little star dots first while the wall is still solid, then saw out the tombstones and moon.