Similar to This
View all stencils →About this stencil
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
AdvancedMoonlit Cat & Six Stars
A sitting cat gazes up at a crescent moon while six small stars scatter across the night sky, its long tail curling into an elegant spiral. This is a shading design, so the moon, stars, and cat outline are shaved into the skin and glow as luminous grooves rather than open holes. Rated hard for its long unbroken curves, carve the tail spiral in one slow continuous pass and keep your groove depth consistent so the glow stays even.
IntermediateCat Head With Curled Hat
A cat's head wearing a floppy witch hat, carved as one connected glowing shape with the hat brim flaring wide and the tip curling over. Pointed whisker cuts flick out from each cheek, and the whole silhouette is cut through so it lights up as a single bold window. A manageable medium carve; the curl at the hat tip is the trickiest sliver, so saw it slowly and support the rind with your free hand.
Beginner-friendlyTall Cat With Rounded Teeth
An upright cat face sized for taller pumpkins: leaf-shaped eyes, a small triangle nose, three long whisker slits on each cheek, pointed ears, and a smiling mouth with rounded teeth left in place. Every feature is a simple pierced cutout. Carve the skinny whisker slits with a fine blade before opening the larger eyes and mouth so the wall stays stiff while you work.
Beginner-friendlySitting Cat & Curled Tail
A cat sits in profile with its ears up and its long tail curling around its feet, all rendered as one softly glowing shape. Instead of cutting holes, you shave away the skin inside the outline so the thinner wall lights up while the pumpkin stays sealed. Use a loop tool or vegetable peeler and keep the depth even; this easy shading style is very forgiving for first timers.
Expert / ProBlack Cat Pumpkin Stencil
A crouching cat rendered in fluid streaks of fur fills this expert pumpkin stencil: the compact face with pointed ears and dot whiskers anchors the left, while the body dissolves into dozens of flowing slash-shaped cuts representing individual fur strands, a high arched tail, and extended claws. The striped fur pattern creates many thin orange bridges between the cuts, giving the carved pumpkin a dramatically textured look when lit. Cut the face details first while the surrounding wall is intact, then work the fur slashes from the body outward toward the tail tip.
Beginner-friendlyFour Diamonds and Eight Dots
Four diamonds run in a straight column down the front of the pumpkin, flanked by a staggered row of round dots on each side, turning a tall pumpkin into a modern lantern. All twelve openings are cut through, and their regular spacing is what sells the design. Mark the vertical centerline first and measure each diamond's position before cutting, since even spacing matters more here than fancy knife work.