Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Moonlit Mouser pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. An upright cat sits in silhouette beneath a small crescent moon, just two cut-through openings on the whole pumpkin. The cat's ears, curved back, and tail all come out as a single piece, leaving the shell dark around two clean glowing shapes. Trace the cat's outline slowly in one continuous cut and push the piece out from inside the pumpkin for the cleanest edge. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 40-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the crescent above the cat. Cut region 1 at upper right. Follow the thick lower arc and its two unequal tips, keeping the large white inner curve connected to the background. Leave the full white gap above the cat ears.
- Trace the whole seated cat. Cut region 2 around both pointed ears, upright body and left-curling tail. Keep the inward white notch above the tail attached to the exterior shell. Follow the broad low base and support the large plug while finishing the tail tip.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyMidnight Whiskers Pumpkin Stencil
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact.
Beginner-friendlyWaving Whiskers Pumpkin Stencil
A seated cat in full silhouette with one front paw playfully raised, pointed ears alert, and a long fluffy tail curling up beside its body. The entire cat is cut through as a single connected opening, so the whole figure glows warmly against the evening sky. An easy carve with one caution: the raised paw and tail tip are the narrowest sections, so cut them last with short gentle strokes.
Beginner-friendlyCurly the Kitten Pumpkin Stencil
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Beginner-friendlyTall Tabby Pumpkin Stencil
An upright cat face sized for taller pumpkins: leaf-shaped eyes, a small triangle nose, three long whisker slits on each cheek, pointed ears, and a smiling mouth with rounded teeth left in place. Every feature is a simple pierced cutout. Carve the skinny whisker slits with a fine blade before opening the larger eyes and mouth so the wall stays stiff while you work.
Beginner-friendlyButton-Eyed Kitty Pumpkin Stencil
A sweet cat face built from simple shapes: two triangle ears cut near the top, round eyes, a small triangle nose, and three thin whisker slits fanning out from each cheek. Everything is a cut-through, so the ears, eyes, and whiskers all glow at night. It is an easy carve overall; save the skinny whisker slits for last and use a narrow saw with short strokes so the slits stay crisp.
Beginner-friendlyPatient Paws Pumpkin Stencil
A cat sits in profile with its ears up and its long tail curling around its feet, all rendered as one softly glowing shape. Instead of cutting holes, you shave away the skin inside the outline so the thinner wall lights up while the pumpkin stays sealed. Use a loop tool or vegetable peeler and keep the depth even; this easy shading style is very forgiving for first timers.





