Similar pumpkin stencils
View all stencils βAbout this stencil
This free Haunted Hollow Tree pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A gnarled bare tree glows from a wide split trunk up through forked, twisting branches, the classic haunted-forest silhouette in reverse. The entire tree shape is cut through as one connected opening, so light traces every crooked limb. It rates easy because the cuts are bold, but the branch tips narrow quickly; cut from each tip back toward the trunk and remove the waste in small pieces so no limb snaps off. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Beginner-friendly. Estimated time: 50-75 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 50-75 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Follow all five branching ends. Cut region 1 around the forked top, four unequal side branches and two broad roots. Trace each inward notch without extending it into the white shell. Keep the long trunk as part of the same opening, and support the plug while finishing the branch tips.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedThe Mystic Gaze Pumpkin Stencil
Two huge almond eyes stare straight out, each ringed by fanned lash bars above and a spray of teardrop cuts below, with attached pupils floating in the centers. The eye whites, brow strokes, and roughly twenty teardrops are all pierced, leaving the pupils and lash ribs as connected shell. This one earns its hard rating on the thin lash bars, so cut every slot outward from the eye and support the wall with your palm.
AdvancedThe Stitched Stare Pumpkin Stencil
Two enormous wide eyes with hanging pupils stare beneath crackling zigzag brows, while small skull nostrils sit above a long stitched grin that stretches nearly ear to ear. The eyes are cut through around the drooping pupil tabs, the nostrils are pierced, and the mouth is one thin line crossed by vertical stitch slits. Those dangling pupils and skinny stitches make this a hard carve; keep every stitch cut short and support the pupil tabs while you saw around them.
Beginner-friendlyHollow Eyes Pumpkin Stencil
Two big blank circle eyes stare out beneath short angled brow slits, while the wide mouth is broken into six upright rectangular slots that glow like stitched or fenced-off teeth. Everything is cut through, and the plain round eyes with no pupils give the face its unsettling, vacant charm. The vertical mouth bars keep this an easy carve; cut every slot top-down in the same direction so the strips between them stay straight and even.
Beginner-friendlyIsland Breeze Pumpkin Stencil
A tropical palm tree with a gently curved trunk and five broad fronds fanning from the crown, carved as one connected glowing silhouette. The whole tree is pierced through in a single piece, so the trunk and fronds shine together like an island sunset. This easy design has one caution: the frond tips are the thinnest cuts, so start at the trunk base and work upward, saving the delicate leaf points for your final, gentlest strokes.
Beginner-friendlyGraveyard Shift Pumpkin Stencil
A miniature midnight cemetery: three rounded tombstones of different heights glow along the bottom while a crescent moon and a scatter of small round stars shine above them. Every element is a simple cut-through, and the plain shapes make the scene read clearly from across the street. It is an easy carve; drill the little star dots first while the wall is still solid, then saw out the tombstones and moon.
Beginner-friendlyWhispering Pines Pumpkin Stencil
Three tiered evergreen trees of different heights stand side by side, each with a short trunk, forming a tidy little glowing forest. Every tree is cut through as its own complete silhouette, and since none of the shapes touch, each cutout releases cleanly on its own. It is an easy, satisfying carve; start with the tall center tree, cut each stepped branch layer from the outside tip inward, and finish with the little trunks.





