Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Bashful Blush pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Two big oval eyes glow above a tiny curved smile, with a small round blush circle on each cheek that lights up like a bashful glow. All five features are pierced through, and the shapes are large and simple, making this one of the sweetest easy carves for kids to help with. Cut the little smile last with a fine blade, since that short curve is the only delicate stroke in the whole design. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 35-55 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 35-55 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the two oval eyes. Cut both regions marked 1. Preserve the broad leaning left eye and more upright right eye. Keep the wide white bridge and surrounding shell intact.
- Open both round cheek holes. Cut both regions marked 2. Follow the unequal oval cheeks and their opposite slopes. Keep each separate from its eye and the small mouth.
- Finish the little curved smile. Cut region 3 along the compact upturned crescent. Preserve the white cheek above the smile and both rounded outer tips. Support the small plug before the final cut.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyToothy Tot Pumpkin Stencil
A cheerful four-hole face: two big round eyes, a small triangle nose, and a wide upturned smile with a single square tooth hanging from the top lip. Everything is a simple cut-through opening with no fragile details, making it one of the friendliest first carves for kids helping out. Drill or trace the round eyes with a cup or cookie cutter for perfectly smooth circles.
Beginner-friendlyButton Nose Buddy Pumpkin Stencil
Two round glowing eyes, a tiny button nose, and one big sweeping smile give this pumpkin the friendliest face on the block. All four openings are cut straight through, with no teeth, brows, or tricky details to manage. It is about as easy as carving gets, ideal for a toddler's first pumpkin with adult hands on the saw; drill the eyes and nose with a round cutter, then take the long smile in one smooth curve from corner to corner.
Beginner-friendlyBeaming Bliss Pumpkin Stencil
Two upswept crescent eyes squint with joy above an enormous open smile that stretches nearly the full width of the pumpkin, curling up into playful points at each corner. Just three cut-through openings make the whole face, with no nose, teeth, or fragile bits anywhere. This easy design is pure beginner fun; carve the big smile first while the wall is strongest, then the two eye crescents, angling your blade slightly outward so the pieces push free cleanly.
Beginner-friendlyThe Lone Tooth Pumpkin Stencil
Two tall rounded eyes of slightly different sizes sit high on the pumpkin above a small off center smile holding one square tooth. Only three openings get cut, which keeps this easy pattern quick and friendly rather than frightening. Leave the little tooth attached by carving carefully around it inside the mouth opening, and save the smaller eye for last while your blade is warmed up.
Beginner-friendlyThe Big Softie Pumpkin Stencil
Pure cheer: two upturned crescent eyes squint with delight above a huge toothless smile that curls up at both corners. All three shapes are pierced through so the whole face beams with candlelight, and the matching curves give it a warm, laughing character. This easy pattern rewards smooth cutting; saw each crescent in one steady motion following the curve, and round off the smile's corners rather than leaving sharp points.
Beginner-friendlyCrooked Chuckles Pumpkin Stencil
A lovably lopsided face: one huge round eye beside one small one, over a wide wavy smile with a single square tooth poking down and another poking up from opposite sides. Every shape is a cut-through, and the deliberate asymmetry is the whole joke. This easy design forgives wobbly lines since crooked only makes it funnier; just keep the two teeth attached by cutting around them, not across their bases.





