Similar pumpkin stencils
View all stencils βAbout this stencil
This free The Stitched Stare pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. Two enormous wide eyes with hanging pupils stare beneath crackling zigzag brows, while small skull nostrils sit above a long stitched grin that stretches nearly ear to ear. The eyes are cut through around the drooping pupil tabs, the nostrils are pierced, and the mouth is one thin line crossed by vertical stitch slits. Those dangling pupils and skinny stitches make this a hard carve; keep every stitch cut short and support the pupil tabs while you saw around them. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Estimated time: 100-140 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 100-140 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the nine jagged marks. Cut all nine regions marked 1 across the forehead. Follow their different crooked turns and preserve each white gap between the marks and eyes.
- Keep the broad hanging pupils. Cut both regions marked 2 around the wide pupil tabs. Keep each tab attached to its upper eye rim. Preserve the large rounded outer contours and unequal pupil shapes.
- Cut the two pointed nostrils. Cut both regions marked 3 beneath the eyes. Leave the central nose divider intact and preserve the different angles of the two teardrop openings.
- Open the thirteen-stitch smile. Cut region 4 as one connected opening: a curved smile crossed by thirteen upright stitch slits. Follow each narrow rounded end. Support the long irregular plug and preserve all white material above and below the smile.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Expert / ProThe Antlered Horror Pumpkin Stencil
A tall, unsettling monster mask stares out of the pumpkin: long upright ears branching like antlers, hollow ringed eyes, a skeletal snout, and a mouthful of pointed fangs, all drawn in thin interlocking cutouts. The entire face is pierced through as a network of narrow slots that leaves delicate pumpkin bridges between every glowing line. This expert design demands a fine-detail saw; carve from the center outward so the fragile bridges keep support as long as possible.
Expert / ProThe Scarred Snarl Pumpkin Stencil
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
AdvancedThe Mystic Gaze Pumpkin Stencil
Two huge almond eyes stare straight out, each ringed by fanned lash bars above and a spray of teardrop cuts below, with attached pupils floating in the centers. The eye whites, brow strokes, and roughly twenty teardrops are all pierced, leaving the pupils and lash ribs as connected shell. This one earns its hard rating on the thin lash bars, so cut every slot outward from the eye and support the wall with your palm.
AdvancedFang Snarl Pumpkin Stencil
Deeply wrinkled brows curl over narrowed eyes with rooted pupil tabs, a flared nose snarls in the middle, and a wide fanged grin full of jagged teeth completes this genuinely sinister face, flanked by small diamond cutouts at each temple. Everything is pierced through, and the layered brow wrinkles are why it rates hard. Cut the thin wrinkle slits with a fine-detail saw before the larger eye and mouth openings weaken the surrounding wall.
AdvancedThe Gritted Growler Pumpkin Stencil
Furrowed slash brows press down on angry eyes with squared pupil tabs, over a flat nose, cheek slits, and a wide clenched mouth divided into a grid of glowing tooth windows. Every window is pierced through, and the lattice of rind strips between them is the hard part. Cut the small mouth openings one at a time, alternating sides, so the grid never carries stress from a half finished row.
AdvancedFlame-Eyed Fiend Pumpkin Stencil
Jagged flame-shaped eyes glare above a huge zigzag grin packed with two rows of interlocking pointed teeth. Every eye, brow flick, and tooth gap is pierced clean through, leaving thin orange spikes of rind that read as fangs when the candle is lit. Those narrow tooth points are fragile, so cut them last, work from the tips inward, and support each spike with your free hand as you finish.





