Similar to This
View all stencils →About this stencil
A crown of small four-point stars sparkles around the top of this face, while two big playful eyes with attached pupil tabs sit over a wide grin lined with little teeth. Everything is cut through, and the pupils survive as tabs rooted to the top of each eye opening. Carve the star crown first while the wall is strongest, then cut each eye around its pupil tab in small strokes so the tabs stay put. This design is rated Advanced and takes most carvers around 150 minutes from trace to glow. Multi-layer cuts with skin-peel shading. Plan your cuts first.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the two smiling brows. Cut both regions marked 1. Follow their high domes and concave lower edges. Keep the broad white gaps above both eyes.
- Preserve upward pupil tabs. Cut both regions marked 2 around the upward-looking pupils. Leave each round pupil attached at the top. Preserve their unequal outer contours and curved lower edges.
- Follow the thirteen stars. Cut all thirteen regions marked 3 around the forehead and cheeks. Preserve the unequal point lengths and positions. Keep each white gap between the stars and the face intact.
- Keep four upper smile teeth. Cut region 4 around four upper tooth tabs. Preserve their different angles and widths, keeping every tooth attached. Follow the long curved lower edge and support the plug as you finish.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a linoleum cutter set, x-acto knife, peel tool, and pin transfer wheel. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Expert / ProTwenty-Two Ray Smiling Sun
A beaming sunburst face with closed happy crescent eyes, a small triangle nose, and a huge picket-tooth grin, all encircled by a radiating ring of alternating teardrop and triangle ray cutouts. Every ray, tooth gap, and feature pierces through, and the sheer count of small openings makes it an expert carve. Cut the outer rays in sequence around the circle first, rotating the pumpkin as you go, before opening the large mouth.
AdvancedGoofy Pupils and Twelve Dots
A freckle-faced goofball with lifted eyebrow cuts, big eyes crossed by full-width pupil tabs, a round nose, twelve freckle dots, and a huge open grin with mismatched teeth. The openings are cut through while the pupil bars, teeth, and surrounding freckle rind stay intact. It rates hard because those wide pupil tabs span the entire eye: cut each eye as separate top and bottom windows, drill the freckles with a small round bit, and save the eyebrows for last.
AdvancedArched Pupils and Twelve Rays
This pumpkin is absolutely thrilled to see you: arched eyes with hanging pupil tabs sit above a giant grin packed with separated square teeth, while short rays burst from each cheek like cartoon sparkle lines. All the shapes cut through, and the many thin bridges between teeth and rays are why it rates hard. Cut the small ray slits first while the wall is strongest, then do the teeth, always sawing away from the narrow bridges.
AdvancedBarred Eyes, Fourteen Leaves
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.
Beginner-friendlyRound and Square Eyes
A goofy lopsided face with one big round eye and one square eye, a small triangle nose, and a huge open smile interrupted by two buck teeth hanging from the upper lip. All shapes are cut fully through, and the mismatched eyes do all the comedic work. An easy, forgiving carve for kids and beginners; cut the smile last and leave the two tooth tabs of rind attached so they dangle into the glow.
IntermediateOval Eyes and Eight Cheek Dots
Big oval eyes sit under arched brows above a round button nose and a broad smile showing four blunt square teeth, with four freckle dots sprinkled on each cheek. The eyes, brows, nose, mouth, and dots are pierced through while the tooth bridges stay connected. Poke the eight small cheek dots first, then cut the large features, leaving the tooth bars until the end so they keep support.