Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Folk Art Smile pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Advanced. Estimated time: 90-120 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this designβs PDF.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 90-120 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the two arched brows. Cut both regions marked 1, preserving their unequal arches and the white bands above the eyes.
- Keep both eye bars intact. Cut all regions marked 2: four eye halves and the small round nose. Preserve the full vertical white bar through each eye, attached at its top and bottom.
- Open fourteen cheek leaves. Cut all fourteen regions marked 3, seven on either side. Keep their unequal pointed ovals and alternating angles, preserving all white separators.
- Preserve the seven grin teeth. Cut region 4 around four upper teeth and three lower teeth. Keep every tooth attached and support the long mouth plug. Follow the broad curved smile and its higher right corner.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Expert / ProMandala Smiler Pumpkin Stencil
A mischievous crescent-eyed grin packed with individual teeth sits inside a full ring of diamond and leaf-shaped cutouts, with dozens of small dots sparkling between them. Every element is pierced through, and the sheer number of tiny openings is what earns the expert rating. Drill all the dots first, then saw the border shapes, saving the big fragile mouth for the very end.
Expert / ProSweetheart Harvest Pumpkin Stencil
A folk-art beauty: two heart-shaped keyhole eyes crowned with leafy sprigs, sprays of leaf cutouts fanning across both cheeks, diamond accents down the brow, and a huge grin filled with neat rectangular teeth. Every heart, leaf, diamond, and tooth gap is pierced through, creating a lacework of light. This is an expert pattern with many close-set openings, so work from the center outward and rotate the pumpkin often to keep your cutting angle comfortable.
IntermediateLeaf-Eyed Smile
A grinning jack-o'-lantern face where both eyes are replaced by seven-fingered cannabis leaves, paired with a small triangle nose and a wide smile broken up by blocky square teeth. The leaves, nose, and mouth are all cut through so candlelight pours out of every shape. The leaf points are narrow, so at medium difficulty use a fine saw and cut each finger from the tip inward to keep the serrated edges crisp.
AdvancedEntwined Hearts & Leafy Vines
Two interlocking hearts sit at the center of this romantic design, their looping outlines woven together and trailing off into curling vines and small leaves at each corner. The whole motif is shaved into the skin as pale relief lines, so the pumpkin wall stays intact and the pattern shows clearly by daylight or candlelight. Follow the vine curves in long continuous strokes to keep the linework flowing and even.
IntermediateThe Radiant Daisy Pumpkin Stencil
Eight almond-shaped petals radiate around a solid center in this graceful flower design, with a pair of pointed leaves below and small accent holes dotting each side like falling seeds. All the petals, leaves, and dots are pierced through while the round flower center stays intact, held by the uncut spokes between petals. For this medium carve, cut opposite petals in pairs as you work around the circle so pressure stays balanced and the center never loosens.
Expert / ProInterwoven Hearts and Leaves
Two large hearts interlock at the center, their outlines woven over and under each other like linked rings, with vine tendrils and autumn leaves flourishing around them. The design is deep relief shading: the background is shaved bright while the woven heart bands stay raised, with no holes pierced. Map the over-under crossings before you carve; keeping the weave consistent is the expert part.





