Similar pumpkin stencils
View all stencils βAbout this stencil
This free Leaf-Eyed Smile pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A grinning jack-o'-lantern face where both eyes are replaced by seven-fingered cannabis leaves, paired with a small triangle nose and a wide smile broken up by blocky square teeth. The leaves, nose, and mouth are all cut through so candlelight pours out of every shape. The leaf points are narrow, so at medium difficulty use a fine saw and cut each finger from the tip inward to keep the serrated edges crisp. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 75-110 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 75-110 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Start with the nose. Cut region 1 with short straight strokes. Round its corners slightly and support the small plug while lifting it out.
- Open the leaf eyes. Cut both regions marked 2. Begin at each small lower stem, then work around the lobes with short separate cuts toward the tips. Keep the white shell between the leaves intact.
- Finish the broad grin. Cut region 3 around the two white upper teeth. Keep both teeth attached to the upper lip. Leave a short lower-edge tab until last, support the mouth plug, then release it gently.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedFolk Art Smile Pumpkin Stencil
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.
Expert / ProMandala Smiler Pumpkin Stencil
A mischievous crescent-eyed grin packed with individual teeth sits inside a full ring of diamond and leaf-shaped cutouts, with dozens of small dots sparkling between them. Every element is pierced through, and the sheer number of tiny openings is what earns the expert rating. Drill all the dots first, then saw the border shapes, saving the big fragile mouth for the very end.
Expert / ProSweetheart Harvest Pumpkin Stencil
A folk-art beauty: two heart-shaped keyhole eyes crowned with leafy sprigs, sprays of leaf cutouts fanning across both cheeks, diamond accents down the brow, and a huge grin filled with neat rectangular teeth. Every heart, leaf, diamond, and tooth gap is pierced through, creating a lacework of light. This is an expert pattern with many close-set openings, so work from the center outward and rotate the pumpkin often to keep your cutting angle comfortable.
IntermediateTreetop Grazer Pumpkin Stencil
A long-necked brachiosaurus stretches up toward three tropical leaves floating above it, its full body cut through as one flowing silhouette from tail tip to tiny head. The leaves are separate cutouts with notched edges that add extra glow around the dino's snack. Cut the leaves first for practice, then work the dinosaur from the tail forward, saving the slender neck for careful final strokes.
IntermediateDeer Trail Pumpkin Stencil
Two split deer hoofprints, each with a pair of dewclaw dots beneath, share the pumpkin with a lobed oak leaf and a few scattered accent dots for a woodsy, cabin-porch feel. Every track, dot, and the leaf is fully cut through with plenty of solid skin between elements. It is a comfortable medium carve; poke a starter hole in each small dot and cut those first, since tiny circles are easiest while the surrounding wall is still rigid.
IntermediateTeacher's Apple Pumpkin Stencil
A plump apple with a stem and single leaf glows at the front, trailed by a diagonal line of four round holes like tumbling seeds. The apple body, leaf, and dots are all pierced through, with the stem notch left as dark shell between them. A great pick for classrooms and teacher gifts; punch the four small holes with a corer first, then saw the apple outline in slow curves.





