Similar pumpkin stencils
View all stencils βAbout this stencil
The The Radiant Daisy pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. Eight almond-shaped petals radiate around a solid center in this graceful flower design, with a pair of pointed leaves below and small accent holes dotting each side like falling seeds. All the petals, leaves, and dots are pierced through while the round flower center stays intact, held by the uncut spokes between petals. For this medium carve, cut opposite petals in pairs as you work around the circle so pressure stays balanced and the center never loosens. It makes a fun jack-o'-lantern design for Halloween night. It is rated Intermediate. Estimated time: 75-110 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 75-110 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open the six accent holes. Cut the six regions marked 1 in two curved rows of three beside the lower flower. Preserve the unequal hole sizes and their staggered heights.
- Trace the four left petals. Cut the four regions marked 2 from the top petal around the left side. Preserve their individual almond outlines and keep the broad central white hub joined through the gaps.
- Continue around the right petals. Cut the four regions marked 3 from the upper-right petal down to the bottom petal. Keep every radial white strip intact; the eight petals are separate openings, not one connected flower cutout.
- Finish the two low leaves. Cut both regions marked 4 beneath the flower. Follow their different curved sweeps and pointed ends. Preserve the uncut central stem and the gaps beside the lower petal and accent holes.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
IntermediateLaurel Wreath Glow Pumpkin Stencil
Fifteen almond-shaped leaves sweep upward in two mirrored arcs, curving around the pumpkin's face like a laurel wreath opening toward the stem. Each leaf is cut fully through, so the whole design becomes an elegant pierced lantern with no face at all. Alternate sides as you cut, removing one leaf on the left and then its mirror on the right, to keep the wall's strength balanced throughout.
IntermediateAutumn Burst Pumpkin Stencil
A big pointed maple leaf glows at the center while twelve small diamonds ring it like sparks, giving the design a festive burst of fall energy. The leaf and every diamond are cut completely through, so the whole arrangement shines as one radiant cluster. At medium difficulty, carve the maple leaf's deep notches with straight relief cuts into each valley, then finish the diamonds last since their small size makes them quick and forgiving.
IntermediateDeer Trail Pumpkin Stencil
Two split deer hoofprints, each with a pair of dewclaw dots beneath, share the pumpkin with a lobed oak leaf and a few scattered accent dots for a woodsy, cabin-porch feel. Every track, dot, and the leaf is fully cut through with plenty of solid skin between elements. It is a comfortable medium carve; poke a starter hole in each small dot and cut those first, since tiny circles are easiest while the surrounding wall is still rigid.
IntermediateOak Leaf Tumble Pumpkin Stencil
Two oak leaves of different sizes drift diagonally across the pumpkin, their lobed edges captured in crisp detail. Both leaves are cut fully through the wall, so each one glows like a lantern-lit leaf caught mid-fall. This medium design's challenge is the wavy lobed outline, so use a fine-tooth saw and pivot at every lobe notch, removing each leaf in two or three pieces instead of forcing out one large chunk.
IntermediateMaple Drift Pumpkin Stencil
Three maple leaves drift diagonally down the pumpkin, each one cut fully through with its stem, and small round holes scattered between them like floating seeds. The pierced leaves throw crisp, recognizable maple silhouettes of light, making this a lovely all-autumn design rather than a strictly Halloween one. Saw each leaf point from the tip inward and remove the waste in sections so the notched edges stay sharp.
IntermediateFalling Oak Trio Pumpkin Stencil
Three oak-style leaves tumble down the tall face of the pumpkin, each one cut through around its lobed outline while a central vein of rind is kept intact up the middle. Those uncut vein strips split each glowing leaf in two and give the design its realistic structure. The veins are also the fragile part of this medium carve, so cut each leaf as two separate halves on either side of the vein and never pry against the strip itself.





