Similar pumpkin stencils
View all stencils βAbout this stencil
The Sunrise Rainbow pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. Three nested rainbow arcs curve over a low half circle sun, filling the bottom of the pumpkin with stacked bands of light. Each arc is cut through while narrow ribs of rind stay between the bands, which is what creates the layered glow. Keep those ribs at least half an inch wide as you carve this medium design, since they carry all the structure. It makes a fun jack-o'-lantern design for Halloween night. It is rated Intermediate. Estimated time: 50-75 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 50-75 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the low half-disc. Open region 1 inside the rainbow. Keep the straight lower baseline and slightly uneven domed top. Retain the narrow white band directly above it.
- Trace the innermost arc. Cut region 2 around the lowest curved band. Follow both curves and its short ends, preserving the shell beneath each end and the entire white separator above the half-disc.
- Open the middle arc. Cut region 3 around the wider middle band. Retain the two white curved strips beside it and keep both lower tips attached to the uncut baseline.
- Finish the outer arc. Cut region 4 last along the broad outer sweep. Support the long curved plug before releasing its ends. All three white bands remain joined to the shell along the lower baseline.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyShooting Star Pumpkin Stencil
One big five-pointed star dominates the pumpkin with three small round dots arcing beneath it, like a shooting star leaving a trail. Both the star and the dots are straightforward cut-through openings, making this a perfect first stencil for young helpers with an adult on the knife. Drill or poke the three dots first as warmups, then saw the star point to point, backing out at each corner.
Beginner-friendlyLucky Rainbow Pumpkin Stencil
Three nested arches stack like a glowing rainbow, each band cut fully through so the pumpkin lights up in bright concentric ribbons. The strips of pumpkin left between the arches form the rainbow's dark bands and keep the wall sturdy. It is an easy design with big visual payoff; cut the smallest inner arch first and work outward, and keep the leftover ribs at least half an inch wide so they stay strong.
IntermediateThe Quiet Cottontail Pumpkin Stencil
A seated rabbit in profile with two tall split ears, a rounded back, and tucked front paws, cut through as a nearly single silhouette with slim gaps defining the ears and feet. The shell around the bunny stays whole so the glowing shape reads crisply from a distance. Carve the narrow gap between the ears first; it is the finest cut on an otherwise smooth outline.
IntermediateTumbling Hearts Pumpkin Stencil
Seven hearts zigzag down the front in an alternating left-right column, with small round dots sprinkled between them for sparkle. Each heart and dot cuts fully through, and the vertical layout is made for tall, skinny pumpkins and gourds. A medium carve mostly for the layout; tape the stencil straight down the tallest face before transferring, and carve from the top heart downward so shavings fall clear of finished cuts.
IntermediateSweetheart Smile Pumpkin Stencil
An irresistibly cute kawaii face: two tall oval eyes, a tiny curved smile, a heart-shaped blush on each cheek, and eight little sparkle dots scattered around the edges. Every element is a small pierced opening, and the wide spacing across a squat pumpkin gives it that classic sticker-art charm. At medium difficulty the hearts and dots demand patience; use a drill bit or apple corer for the round sparkles to keep them perfectly circular.
IntermediateLullaby Moon Pumpkin Stencil
Three plump five-pointed stars scatter across the upper face of the pumpkin while a small crescent moon tucks into the lower corner, capturing a dreamy bedtime sky. Every shape cuts cleanly through the wall, and the generous star sizes keep the sawing forgiving. Cut the crescent's inner curve before its outer curve so the thin horn tips at each end release without cracking.





