Similar to This
View all stencils →About this stencil
A cat's head wearing a floppy witch hat, carved as one connected glowing shape with the hat brim flaring wide and the tip curling over. Pointed whisker cuts flick out from each cheek, and the whole silhouette is cut through so it lights up as a single bold window. A manageable medium carve; the curl at the hat tip is the trickiest sliver, so saw it slowly and support the rind with your free hand. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 60-85 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Trace the curled pointed hat. Cut the single region marked 1 around the tall hat and its hooked right tip. Preserve the large white notch below the hook. Follow the two pointed ears and wide brim without flattening their uneven sides.
- Round the lower cat head. Continue around the small cheek notches and broad rounded head. This silhouette has no eye or nose openings. Support the large plug, leaving a short tab on the lower edge until the hat and ears are complete.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlyUpright Cat Beneath a Crescent
An upright cat sits in silhouette beneath a small crescent moon, just two cut-through openings on the whole pumpkin. The cat's ears, curved back, and tail all come out as a single piece, leaving the shell dark around two clean glowing shapes. Trace the cat's outline slowly in one continuous cut and push the piece out from inside the pumpkin for the cleanest edge.
IntermediateCat Fangs and Four Whiskers
A grinning cat face made for a black-painted pumpkin: big almond eyes with pointed ear tips, a triangle nose, four whisker slits, and a wide smile showing two tiny fangs. Every feature cuts through so the orange interior glows against the dark shell. Paint the pumpkin first and let it dry fully before transferring the pattern; carve the whisker slits last with gentle strokes so the paint edge does not chip.
Beginner-friendlyRaised Paw Cat with Tall Tail
A seated cat in full silhouette with one front paw playfully raised, pointed ears alert, and a long fluffy tail curling up beside its body. The entire cat is cut through as a single connected opening, so the whole figure glows warmly against the evening sky. An easy carve with one caution: the raised paw and tail tip are the narrowest sections, so cut them last with short gentle strokes.
Beginner-friendlySeated Cat with Upright Tail
A seated cat in profile, ears pricked and long tail curling upward, cut entirely through so the whole silhouette becomes a window of warm light. The design has no interior details, which keeps it simple, but the slender curved tail asks for a little care. An easy carve overall; save the tail for last and support the wall with your free hand as you follow its curve so the tip stays intact.
IntermediateBent Hat with Nine Sparkles
A tall witch hat with a jauntily bent tip glows from the pumpkin, its wide oval brim carved as a separate opening beneath the crown so the solid hatband reads as a dark stripe between them. Around the hat, small circles and diamonds sparkle like scattered magic. This medium design hinges on that hatband bridge; cut the crown and brim as two independent openings and never saw across the band, then finish with the little sparkle shapes using a drill and detail knife.
IntermediateSlanted Cat Eyes and Whiskers
A low, wide cat face with menacing slanted eyes, a triangle nose, and long horizontal whisker slashes stretching across both cheeks. Each feature is pierced clean through, and the wide layout suits a squat, round pumpkin. Angle your saw to match the eye slant, and cut the long whiskers in two passes from the outside in so the thin slits stay crisp and even.