Similar pumpkin stencils
View all stencils βAbout this stencil
This free Winky Whiskers pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A playful cat face built from two pointed ears, one large round eye and one smaller one, a tiny nose, and three long whisker slits flaring out on each side. All the shapes are pierced through so the ears, mismatched eyes, and whiskers glow in a wide band across the pumpkin. Cut the skinny whisker slits first while the wall is strongest, then open the bigger eye holes. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Intermediate. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Keep both unequal pupils. Cut the two face regions marked 1. Keep the large left pupil attached at its upper right and lower left, and the small right pupil attached above. The white nose rises from the lower edge; leave its connection intact.
- Open the curved whiskers. Cut the six whiskers marked 2, three on each side. Follow their outward curves with short strokes. Keep every white divider between the whiskers and the head; support the face plug while completing its final edge.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyWaving Whiskers Pumpkin Stencil
A seated cat in full silhouette with one front paw playfully raised, pointed ears alert, and a long fluffy tail curling up beside its body. The entire cat is cut through as a single connected opening, so the whole figure glows warmly against the evening sky. An easy carve with one caution: the raised paw and tail tip are the narrowest sections, so cut them last with short gentle strokes.
Beginner-friendlyCurly the Kitten Pumpkin Stencil
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Beginner-friendlyButton-Eyed Kitty Pumpkin Stencil
A sweet cat face built from simple shapes: two triangle ears cut near the top, round eyes, a small triangle nose, and three thin whisker slits fanning out from each cheek. Everything is a cut-through, so the ears, eyes, and whiskers all glow at night. It is an easy carve overall; save the skinny whisker slits for last and use a narrow saw with short strokes so the slits stay crisp.
IntermediateFeline Fury Pumpkin Stencil
A low, wide cat face with menacing slanted eyes, a triangle nose, and long horizontal whisker slashes stretching across both cheeks. Each feature is pierced clean through, and the wide layout suits a squat, round pumpkin. Angle your saw to match the eye slant, and cut the long whiskers in two passes from the outside in so the thin slits stay crisp and even.
IntermediateMidnight Fang Pumpkin Stencil
A grinning cat face made for a black-painted pumpkin: big almond eyes with pointed ear tips, a triangle nose, four whisker slits, and a wide smile showing two tiny fangs. Every feature cuts through so the orange interior glows against the dark shell. Paint the pumpkin first and let it dry fully before transferring the pattern; carve the whisker slits last with gentle strokes so the paint edge does not chip.
IntermediateWhisker Kitten Pumpkin Stencil
A sweet kitten face with pointed ear triangles, big almond eyes, a small triangle nose, extra-long whisker slits sweeping from each cheek, and a dainty curled smile beneath. All features are pierced through, and the long thin whiskers are what nudge this to medium difficulty. Cut each whisker as one smooth continuous stroke rather than sawing back and forth, and the slits will glow as fine clean lines.





