Similar to This
View all stencils →About this stencil
A sweet kitten face with pointed ear triangles, big almond eyes, a small triangle nose, extra-long whisker slits sweeping from each cheek, and a dainty curled smile beneath. All features are pierced through, and the long thin whiskers are what nudge this to medium difficulty. Cut each whisker as one smooth continuous stroke rather than sawing back and forth, and the slits will glow as fine clean lines. This design is rated Intermediate and takes most carvers around 75 minutes from trace to glow. Comfortable knife handling required. Small details and curves.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a intermediate carve like this you'll want a x-acto knife, poker tool, ribbon scoop, and painter's tape. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
Beginner-friendlySmall Cat With Crescent Smile
A sweet cat face scaled for small pumpkins, with almond eyes topped by pointed ear notches, a tiny triangle nose, a crescent smile, and two slender whiskers flaring from each cheek. Everything cuts fully through, and the shapes are simple and forgiving. The whiskers are the only delicate part; cut each one as two long strokes meeting at the tip instead of dragging the saw sideways through the narrow slit.
Beginner-friendlyOval-Eyed Cat With Two Curls
A friendly cat face built from simple shapes: two pointed ears with inner triangles, big oval eyes, a tiny triangle nose, a curled smile, and three long whiskers sweeping out from each cheek. Every element is cut through, so the whole face lights up at once. The whiskers are just narrow slits, which is why kids can manage this one; poke each slit through with the tip of the saw and lengthen it slowly.
Beginner-friendlyCat With Two-Tooth Smile
A grinning cat jack-o'-lantern with triangle ears at the crown, big round glowing eyes, a small triangle nose, slender whisker slits, and a wide smile showing two square teeth. The main features are pierced through while the pumpkin skin between them forms the cat's face. This is a true easy design with big friendly shapes, so it is a great first carve for kids; just have an adult handle the thin whisker cuts with a fine saw.
IntermediateCat Face & Eight Whiskers
A sweet cat face rendered entirely in surface shading: pointed ears with inner triangles, wide eyes with crescent pupils, a small nose, a curved smile, and eight long whiskers fanning across the cheeks. Nothing is pierced through, so you shave away just the orange skin and let the pale flesh show the design. At medium difficulty, keep your scraping depth even along the thin whisker lines so they all glow with the same brightness.
Beginner-friendlyRaised Paw Cat with Tall Tail
A seated cat in full silhouette with one front paw playfully raised, pointed ears alert, and a long fluffy tail curling up beside its body. The entire cat is cut through as a single connected opening, so the whole figure glows warmly against the evening sky. An easy carve with one caution: the raised paw and tail tip are the narrowest sections, so cut them last with short gentle strokes.
AdvancedBarred Eyes, Fourteen Leaves
Big round eyes split by vertical rind bars sit over a button nose and a huge grin packed with square teeth, while clusters of petal shaped leaves fan out from each cheek. Everything is cut through, and the fourteen petals plus the tooth gaps are why this rates hard. Carve from the center of the face outward so the delicate petal clusters are handled last, when the wall is lightest.