Similar pumpkin stencils
View all stencils βAbout this stencil
Download the The Scaled Fury pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. A ferocious mask of a face with slanted furious eyes, a flared nose, and a jagged mouth full of interlocking fangs, all framed by dense rows of diamond and wedge cutouts that cover the cheeks and brow like scales. Every diamond, wedge, and fang is pierced through, turning the whole front into a lattice of fire. This expert pattern demands order: carve from the center outward so surrounding cuts never weaken your working area. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Expert / Pro. Estimated time: 2-3 hours. Actual time varies with preparation, pumpkin size and experience. Intricate details and fragile supports need patience. Technique depends on the design; follow its PDF rather than assuming multiple depth layers.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 2-3 hours from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the swept brow pair. Cut both regions marked 1. Preserve their long inner tapers, curved upper corners and the broad white eye rims beneath them.
- Keep both full eye bars. Cut all four regions marked 2. Leave the vertical bar through each slanted eye attached at both ends. Follow the unequal panel angles and curved outer edges.
- Open nostrils and mask accents. Cut all thirty-six regions marked 3: two teardrop nostrils and thirty-four diamonds or angled accents. Preserve the forehead cluster, cheek rows and five low chin marks, with all white separators intact.
- Follow the downturned grin. Cut region 4 around its unequal upper and lower pointed teeth. Preserve every attachment and the two long downturned outer corners. Support the large irregular plug before releasing the final edge.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a expert / pro carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and detail gouges if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedThe Gritted Growler Pumpkin Stencil
Furrowed slash brows press down on angry eyes with squared pupil tabs, over a flat nose, cheek slits, and a wide clenched mouth divided into a grid of glowing tooth windows. Every window is pierced through, and the lattice of rind strips between them is the hard part. Cut the small mouth openings one at a time, alternating sides, so the grid never carries stress from a half finished row.
Expert / ProThe Ember King Pumpkin Stencil
Hooked, furious eyes glare beneath a crown of flame-shaped cutouts that climb the pumpkin's forehead, while a jagged mouth bristles with rows of interlocking fangs and a diamond nose burns at the center. Nearly a hundred small pierced shapes surround the face, so this is a marathon of careful knife work. Cut from the center outward and rest often; the narrow skin bridges between flames and fangs cannot take rushed strokes.
Expert / ProThe Antlered Horror Pumpkin Stencil
A tall, unsettling monster mask stares out of the pumpkin: long upright ears branching like antlers, hollow ringed eyes, a skeletal snout, and a mouthful of pointed fangs, all drawn in thin interlocking cutouts. The entire face is pierced through as a network of narrow slots that leaves delicate pumpkin bridges between every glowing line. This expert design demands a fine-detail saw; carve from the center outward so the fragile bridges keep support as long as possible.
Expert / ProThe Scarred Snarl Pumpkin Stencil
A nightmare grin stretches ear to ear, packed with dozens of jagged interlocking fangs, beneath two mismatched eyes, one wide and wild and one narrowed and crossed by scar lines, with flame like spikes radiating outward and diamond accents above and below. Nearly all of it is pierced through, leaving a web of thin rind spikes that demands real patience. Work from the center of the mouth outward with a fine saw, supporting each fragile spike as you free it on this expert carve.
AdvancedThe Stitched Stare Pumpkin Stencil
Two enormous wide eyes with hanging pupils stare beneath crackling zigzag brows, while small skull nostrils sit above a long stitched grin that stretches nearly ear to ear. The eyes are cut through around the drooping pupil tabs, the nostrils are pierced, and the mouth is one thin line crossed by vertical stitch slits. Those dangling pupils and skinny stitches make this a hard carve; keep every stitch cut short and support the pupil tabs while you saw around them.
AdvancedThe Crooked Leer Pumpkin Stencil
Slanted leering eyes with attached round pupils glare above a crooked off-center nose and a jagged sneer packed with pointed fangs, while scattered diamond scars glint across both cheeks. The eyes, nose, mouth, and diamonds are pierced with pupils and fang points left as shell. The hard part is the web of narrow fangs; cut each tooth gap from tip to base and never twist the blade mid-cut.





