Similar pumpkin stencils
View all stencils →About this stencil
The Grim Reaper pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. A compact cartoon Grim Reaper stands front-facing with a skull face peering out from a rounded hood, angular raised arms gripping a long diagonal scythe pole, a blocky robe body with visible feet, and a small wisp of ground fog at the base on this hard pumpkin stencil. The scythe blade is a large separate curved cutout at the upper right, while the skull face features two angular eye holes and a small nose cutout. Cut the scythe blade first since it is isolated and large, then the hood opening, skull details, and robe voids in that order. It makes a fun jack-o'-lantern design for Halloween night. It is rated Advanced. Estimated time: 90-150 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 90-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Carve the skull face first. Cut the two slanted eyes and the small triangular nose inside the hood. These are the most enclosed details; pierce each shape and saw toward the sharp inner corners from both sides.
- Cut the hand and staff pieces. Remove the small oval finger segments of the gripping hand, then the three staff sections above and below it. The white gaps that separate the hand from the staff must stay intact.
- Shape the scythe blade. Cut the long curved blade at the top, sawing toward its point from both edges. Keep the narrow white gap between the blade and the staff untouched.
- Cut the hood and shoulder curves. Remove the curved strips that frame the hood and shoulders, working each crescent from tip to tip. These arcs are thin, so keep the saw moving slowly.
- Finish with the robe and ground. Cut the larger robe panels and the lumpy ground shapes at the base last. Leave a small tab on the biggest robe piece, support the plug, then release it.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedFlowing Grim Reaper Pumpkin Stencil
A flowing Grim Reaper figure grips a long scythe at chest height, its hooded skull face glowing with hollow eye sockets as the ragged robe billows outward below. The curved scythe blade arcs dramatically across the top of the composition. Lit from within, the open robe hem, skeletal hands, and skull interior create a layered halo of light around the solid hood shape. Carve the large open robe sections last so the scythe blade, the most slender element, stays braced by the surrounding pumpkin wall while you work.
Expert / ProThe Midnight Reaper Pumpkin Stencil
A shrouded Grim Reaper grips a scythe overhead in this expert-level pumpkin stencil, packed with dozens of jagged, flowing cut sections that render tattered robes, bony fingers, a skull face peering from the hood, and a second smaller skull on the chest. The design reads as a dense web of orange skin bridges surrounding numerous glowing cutouts. Tackle the smallest interior cuts around the skull face first so you have full stencil support, then work outward through the robe details toward the large robes and scythe blade.
AdvancedGhost Reaper Pumpkin Stencil
A faceless hooded ghost figure clutching a large scythe stands amid swirling ground-level mist and gnarled branch tendrils in this hard ghost pumpkin stencil, the entire composition built from one connected silhouette with the robe edges and mist tendrils forming narrow cut points. When lit, the reaper-ghost and the curling ground fog glow together as a single haunting shape. Cut the thin mist tendrils at the base and the ragged robe hem first, then work upward to the broader robe body and the diagonal scythe shaft.
Expert / ProThe Soul Harvester Pumpkin Stencil
A hooded Grim Reaper leans forward gripping a large curved scythe, its skeletal face visible inside the cowl, and tattered robe edges dissolving into ragged fringe at the bottom in this expert grim reaper pumpkin stencil. The composition reads as a single dramatic figure, with the scythe blade sweeping up behind the figure and the robe tatters creating many thin separate cuts below. Carve the robe fringe tatters at the base first, since those narrow flame-like cuts are the easiest to crack once adjacent large sections of the torso are removed.
Expert / ProThe Hollow Gaze Pumpkin Stencil
A hooded Grim Reaper face looms from within a tattered, wind-swept cloak in this expert pumpkin stencil, its skull face showing deep-set eye sockets, a skeletal nose cavity, and rows of exposed teeth, all surrounded by jagged cloak edges that dissolve into flame-like wisps at the bottom. Dozens of small cuts through the cloak fabric, face, and shroud edges create a complex web of glowing gaps. Tackle the most crowded area, the teeth row, first when your hands and the pumpkin are both fresh, then spiral outward to the cloak wisps.
Expert / ProSkeletal Grim Reaper Pumpkin Stencil
A menacing skeletal Grim Reaper looms in three-quarter view on this expert pumpkin stencil, its ragged shroud trailing in torn tatters, one clawed bony hand gripping a scythe handle, a detailed skull face with visible teeth, sunken eye sockets, and a crescent scythe blade arcing across the upper left. Dozens of thin irregular shreds of robe create complex negative spaces throughout the body. Begin by cutting the large scythe blade and clearing the open background areas, then work into the tattered robe fringe from the outside edges inward so the narrow strips never lose support from adjacent uncut skin.