Similar pumpkin stencils
View all stencils →About this stencil
This free Grinning Jack-o-Lantern pumpkin stencil is a printable PDF pattern you can print at home, tape to your pumpkin, and trace. A grinning jack-o-lantern face carved within a jack-o-lantern stencil: a swirling curly stem at the top, two angled brow-cuts above a large square single-nostril eye, and a wide-open mouth whose upper lip forms a jagged row of sharp saw-tooth teeth with a single large central fang dropping from above. The mouth cavity is enormous relative to the face, giving the design its signature frenzied look. Cut the curl of the stem and the tiny eye detail first, then the saw-tooth teeth from the outer corners inward so the narrow points stay supported until the large mouth cavity is opened last. Use it as a carving template for your Halloween jack-o'-lantern. It is rated Advanced. Estimated time: 90-150 minutes. Actual time varies with preparation, pumpkin size and experience. Fine details and narrow supports need careful planning. Follow the cutting and shading key in this design’s PDF.
Pumpkin size guide
- 🎃 Small (5 to 7"): print at 80%
- 🎃 Medium (7 to 10"): print at 100% (recommended)
- 🎃 Large (11 to 13"): print at 130%
- 🎃 Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the gray areas on the printable pattern are the pieces you remove, and everything white stays attached. The steps below give you the safest carving order. Plan on about 90-150 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Cut the curled stem. Start at the top with the swirling stem pieces. The tight spiral at the left end is delicate; rotate the pumpkin and keep the saw moving in short strokes.
- Cut the center nose piece. Remove the tall rounded shape between the eyes, cutting the small notch at its base from both sides.
- Cut the two slanted eyes. Take out the long horn-like eye slashes. Each tapers to a fine point at the outer end; work toward the points from both directions.
- Cut the jagged grin. Cut around every spiky tooth along the top of the mouth opening. The white zigzag teeth must stay attached, so saw into each point and back out; never twist.
- Release the jaw last. The lower jaw and chin form the largest piece, with more spiky teeth along its top edge. Leave a tab at the bottom of the chin, support the plug with your free hand, then finish the cut and ease it out slowly.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every piece is out, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a advanced carve like this you'll want a fine-detail pumpkin saw, spoon / scoop, pin transfer tool, and small gouge if the pattern includes shading. Here's the kit we reach for, but start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
AdvancedOld Mischief Pumpkin Stencil
A mischievous scowling face with arched eyebrows over round glaring eyes, small wrinkle slits fanning from each eye's outer corner, diamond accents dotting the cheeks, and a sweeping smile packed with uneven square teeth. Every cut pierces through, so light streams from all the details at once. A hard carve where the wrinkle slits are the fussy part; cut those hairline slivers with a detail saw before opening the large eye holes beside them.
AdvancedTongue-Out Trickster Pumpkin Stencil
This mischievous face pairs one big round eye with a smaller sly one under arched brows, above a sprawling grin full of gapped teeth and a tongue-shaped opening lolling out below. Clusters of drilled dots frame each cheek like a glowing gridwork of freckles. It is all cut-through work with many narrow tooth bridges, so use a fine saw, cut the dots first, and support each bridge as you free the mouth pieces.
AdvancedThe Grid Grin Pumpkin Stencil
A grinning classic face where each triangle eye is split by a vertical bar of rind, the diamond nose sits between rows of small diamond cheek cutouts, and the huge smile is divided into a grid of rectangular tooth windows. Everything is pierced through, creating a lantern that flickers from dozens of openings. Rated hard because those rind bars and grid struts are fragile; cut away from each bar and never twist the blade near them.
AdvancedThe Sly Side-Eye Pumpkin Stencil
Two crescent-moon eyes glance slyly to the side above a small triangle nose and a mouth packed with a fence of narrow, uneven teeth. All openings cut through, and the row of skinny tooth gaps is what makes this a hard carve. Pierce and remove the little slots between teeth first, while the surrounding wall still supports them, then finish the big eye crescents and the mouth outline last.
AdvancedThe Barbed Grin Pumpkin Stencil
A sinister jack-o'-lantern face with hooked, narrowed eyes, a small heart-shaped nose, and an enormous crescent smile lined with dozens of needle-thin barbed teeth. The eyes, nose, and grin are cut through, and the tiny spikes along the smile are what push this into hard territory. Carve the long crescent first, then nick each barb outward from the opening with a fine blade so the delicate points do not tear.
AdvancedThe Dripping Grin Pumpkin Stencil
A gleefully sinister face with huge round eyes topped by curling, hooked brows, a small skull-style nose, and an enormous crescent grin edged with thin dripping tooth spikes. Every element is cut through, and the narrow drip slits along the mouth are what earn the hard rating. Carve the big eye and mouth openings first, then cut the fragile tooth drips last with a fine saw so they do not snap.