Similar to This
View all stencils →About this stencil
A footed mortar bowl with a tilted pestle resting across its rim, the timeless symbol of pharmacists and potion mixers alike. The bowl, base, and pestle are carved as one connected cutout so the whole emblem glows in a single bright shape. An easy pattern with mostly smooth curves; keep the narrow bridge where the pestle meets the bowl rim intact, and this one is done in a single relaxed sitting. This design is rated Beginner-friendly and takes most carvers around 30 minutes from trace to glow. Great for kids and first-timers. Big shapes, short cuts.
Pumpkin size guide
- 🎃 Small (5–7") — print at 80%
- 🎃 Medium (7–10") — print at 100% (recommended)
- 🎃 Large (11–13") — print at 130%
- 🎃 Giant (14"+) — print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?▾
Yes. The PDF is vector so it scales cleanly. Print at 100% for a 7–10 inch pumpkin, 130% for 11–13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?▾
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?▾
Usually 5–10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and double the lifespan.
Can I sell pumpkins carved with this stencil?▾
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?▾
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
- 1Print it
Download the PDF and print at 100% scale on letter or A4 paper.
- 2Prep the pumpkin
Cut the lid at an angle, scoop the guts, thin the wall to ~1 inch.
- 3Tape it on
Snip darts in the paper so it lies flat against the curve.
- 4Transfer the design
Poke along every line — about one dot every 1/8 inch.
- 5Carve it
Connect the dots with short straight cuts. Center first, work outward.
- 6Light it up
Drop in a battery LED pumpkin light and you're done.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for — start with whatever you already own.
Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon ↗
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon ↗
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon ↗
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
Carvers who liked this one also downloaded these.
IntermediateSeven-Rib Shell and Three Dots
A fan-shaped scallop shell spreads seven glowing ribs from a hinged base, crowned by three small round dots floating above like sea spray. Each rib is its own cut-through opening separated by strips of intact wall, so the shell keeps its elegant ridged look when lit. Cut the center rib first and work outward symmetrically, keeping the dividing strips at least a finger-width so the fan stays strong.
IntermediateSeven Stars in a Winding Trail
Seven five-pointed stars of varying sizes wind down the pumpkin in a gentle S-curve, like a constellation trailing across the night sky. Each star is a full cut-through opening, so the finished lantern twinkles from every angle. Star points are where beginners slip, so cut each arm from the outer tip inward toward the center and let the cuts meet, which keeps all five points sharp on every star.
IntermediateMoon with Five Stars and Dots
A large crescent moon anchors the center of the pumpkin while five stars and a sprinkling of small round holes orbit around it. Every element is pierced through the wall, so the finished carve reads as a glowing night sky from across the yard. Carve the crescent first since it is the largest opening, then add the stars, sawing each point from the tip toward the center for clean corners.
IntermediateThree Crescents and Five Stars
Three crescent moons stack down the center of the pumpkin, each curving the same direction, with five little five-point stars scattered around them like a night sky. Every moon and star is cut cleanly through, so the whole face twinkles once the candle is in. A pleasant medium carve; punch the small stars first with a detail saw, then cut each crescent from the inner curve outward to keep the horn tips sharp.
IntermediateThree Stars and Six Dots
Three five-pointed stars descend in a vertical column, each one paired with small round dots scattered alongside like sparkling companions. Designed for tall, narrow pumpkins, every star and dot is a clean cut-through opening that fills the height of the fruit with light. Poke the dots first, then cut each star from its center outward toward the points so the tips stay sharp and intact.
Beginner-friendlyFour Diamonds and Eight Dots
Four diamonds run in a straight column down the front of the pumpkin, flanked by a staggered row of round dots on each side, turning a tall pumpkin into a modern lantern. All twelve openings are cut through, and their regular spacing is what sells the design. Mark the vertical centerline first and measure each diamond's position before cutting, since even spacing matters more here than fancy knife work.