Similar pumpkin stencils
View all stencils βAbout this stencil
Download the Well I Never pumpkin stencil as a free printable PDF, then tape the pattern to your pumpkin and trace the lines. Two wide oval eyes topped with arched eyebrows hover above a tall oval mouth frozen mid-gasp, giving the pumpkin a permanently astonished expression. The eyes, brows, and mouth are all clean cut-through openings with generous spacing between them. Easy carvers should cut the thin eyebrow arcs first while the wall is strongest, then remove the big ovals; angle the knife slightly outward so each plug pops free without bruising the edges. It works as a carving template for a Halloween jack-o'-lantern or a fall porch display. It is rated Beginner-friendly. Estimated time: 40-60 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a cut-through stencil: the dark numbered regions on the printable pattern are the pieces you remove, and everything white stays attached. The numbers give you the safest carving order, and the steps below walk through them one by one. Plan on about 40-60 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the carving wall to about 1 inch where the design will sit. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer every outline by poking dots along the lines, about one every 1/8 inch. Peel the paper away and carve dot to dot with short, straight strokes.
Carving order
- Open both rounded eyes. Cut the two regions marked 1. Preserve the broader left eye and narrower right eye, leaving the central white bridge intact.
- Cut the oval surprise mouth. Cut region 2 around the tall open mouth. Follow its rounded top and fuller lower curve. Leave the white band above it untouched; this face has no separate nose.
- Finish both raised eyebrows. Cut both regions marked 3 above the eyes. Preserve their different arches and tapered outer ends. Keep each eyebrow separate from its eye and use short strokes near the tips.
Clear loose fibers out of each opening as you go, and never twist or pry the blade against the shell; back it out and recut instead. When every region is open, wipe the cut edges dry and drop in a battery LED puck.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyThe Mighty Pout Pumpkin Stencil
Two drooping teardrop eyes slump toward a broad downturned crescent frown, giving this pumpkin the most theatrical pout on the block. All three features are pierced through, and the big simple shapes make it an easy carve with instant comedic payoff. Angle each teardrop eye so both tips point down and outward, and cut the frown from the middle toward each raised corner to keep the curve even.
Beginner-friendlyThird Eye Visitor Pumpkin Stencil
A delightfully weird mutant face with three round eyes arranged in a triangle above one huge wide oval mouth. All four shapes are pierced through, and the extra eye instantly turns an ordinary pumpkin into a little alien visitor. This is an easy carve with no fragile parts; leave at least an inch of rind between the eyes and the mouth rim so the bridge stays strong.
Beginner-friendlyLast Minute Louie Pumpkin Stencil
Two crisp triangle eyes sit above a tall oval mouth frozen mid-gasp, the three-hole formula that has decorated doorsteps for generations. All three shapes cut straight through, so the whole face can be finished in minutes, making it the ideal last-minute design. Cut each triangle with three straight strokes that overlap slightly at the corners so the points pop out cleanly.
Beginner-friendlyGoofy Gawker Pumpkin Stencil
A comically startled face built from two round eyes set at slightly uneven heights and one tall oval mouth frozen in an open gasp. The three openings are pierced through, and the design shines on bumpy or warty pumpkins where the texture adds to the goofy shock. As an easy carve with only three shapes, the tip is to embrace the asymmetry: keep the eyes deliberately offset rather than trying to level them perfectly.
Beginner-friendlyGoggle-Eyed Gourd Pumpkin Stencil
Made for a bottle gourd or any tall, curvy squash, this design is a startled little face: two round eyes of slightly different sizes and a tall oval mouth frozen mid-gasp. All three shapes are cut through, and the mismatched eyes give the face its comic personality. Gourd walls are thinner and harder than pumpkin, so an easy-carve tip is to drill a pilot hole in each shape and saw slowly outward from there.
Beginner-friendlyThe Quiet Gasp Pumpkin Stencil
The most minimalist face possible: two small round eyes and a single oval mouth, placed low on a tall pumpkin so the blank rind above becomes part of the joke. Just three quick cut-through holes and the carve is done, which makes this a genuine five-minute project. Keep the openings small and evenly spaced; on such a spare design, clean placement is what sells the look.





