Similar pumpkin stencils
View all stencils βAbout this stencil
The Reverse BOO Block Letters pumpkin stencil is a free printable PDF template. Print it, tape the pattern on, and trace it onto your pumpkin. The word BOO in fat block letters fills the front of the pumpkin, carved in reverse relief: the background panel is shaved away while the letters remain raised in untouched skin. No holes are pierced, so the pumpkin stays sturdy and reads clearly by daylight or candlelight. An easy etch for a first shading project; trace the letter outlines with shallow score cuts before peeling the background to an even depth. It makes a fun jack-o'-lantern design for Halloween night. It is rated Beginner-friendly. Estimated time: 60-90 minutes. Actual time varies with preparation, pumpkin size and experience. Larger shapes and shorter cuts. An adult should handle sharp carving tools.
Pumpkin size guide
- π Small (5 to 7"): print at 80%
- π Medium (7 to 10"): print at 100% (recommended)
- π Large (11 to 13"): print at 130%
- π Giant (14"+): print at 150% on tabloid paper
Frequently asked questions
Can I resize this stencil?βΎ
Yes. The PDF is vector so it scales cleanly. Print the pattern at 100% for a 7 to 10 inch pumpkin, 130% for 11 to 13 inch, or 150% for a giant. Use your printer's "Fit to page" or "Custom scale" setting.
What kind of paper works best?βΎ
Standard 20 lb letter or A4 printer paper is fine. Heavier paper is harder to bend around the pumpkin curve. If your printer supports it, set the quality to 'best' so the lines are crisp.
How long will the carved pumpkin last?βΎ
Usually 5 to 10 days. Coat all cut surfaces with petroleum jelly and store the pumpkin somewhere cool overnight. Avoid direct sun. Battery LED pumpkin lights produce no heat and help it last longer.
Can I sell pumpkins carved with this stencil?βΎ
Yes, the carved pumpkin you make is yours. The license covers personal and small-scale commercial carving (selling carved pumpkins, photographing them, posting on social). You may not resell the PDF file itself.
What if my printer doesn't print the whole stencil?βΎ
Set 'Page scaling' to 'Fit' in the print dialog and uncheck 'Auto-rotate'. If it still cuts off, the design includes 0.25" of safe-area margin so a small crop won't ruin it.
How to carve this stencil
This is a continuous-wall shading design: you never cut all the way through the pumpkin. On the printable pattern, light gray regions get just the skin shaved off for a faint glow, dark gray regions are scraped deeper so more light comes through, and white areas keep their skin untouched. The numbers give you the safest working order. Plan on about 60-90 minutes from print to candle.
Set up first. Print the PDF at 100% scale on letter or A4 paper. Cut the lid at an angle, scoop the pumpkin clean, and thin the wall to about 1 inch behind the design so light can pass through the shaded areas. Tape the pattern on (snip small darts in the paper so it hugs the curve) and transfer the outlines by poking dots along every line. Work with a loop tool, clay ribbon scraper, or the back of a spoon rather than a saw.
Shading order
- Peel around the letters. Remove skin and scrape the light-gray halo around the B and both O letters. Preserve the large white letter shapes as untouched rind. The halo follows each rounded outline; the letters themselves remain dark.
- Brighten the four counters. Remove skin and deepen the four dark-gray counters: two inside B and one narrow oval inside each O. Keep their surrounding white letters untouched and the pumpkin wall intact. Check their glow with an LED.
Check your progress often: set a bright LED inside and dim the room lights, and the glow shows exactly where to scrape deeper. Go slowly near thin spots and stop before the wall flexes; a pierced wall cannot be undone.
Tools you'll need
For a beginner-friendly carve like this you'll want a paring knife, spoon / scoop, marker, and led pumpkin light. Here's the kit we reach for, but start with whatever you already own.

Elmchee Pumpkin Carving Kit
13-piece kit with carrying case
Saws for the larger cutouts, plus a scoop for hollowing. Covers both jobs in one kit.
View on Amazon β
HOME MOST LED Pumpkin Lights
4-pack, battery operated, with remote + timer
Orange glow made for jack-o'-lanterns. The remote and timer light the pumpkin every evening without reaching inside.
View on Amazon β
Speedball 4131 Lino Cutter Set
Handle + 5 interchangeable cutters
Interchangeable cutters for peeling and shading the face. Useful for the finer details.
View on Amazon β
Reviews from carvers
Every rating comes from a written review by someone who downloaded this stencil.
Carved this one?
Reviews are open to carvers who downloaded the stencil. Grab the free PDF, then come back and tell everyone how it went.
Community Pumpkin Carving Ideas
Carving ideas that use stencils like this one.
Related stencils
More patterns with a related subject. Compare their skill levels before you choose.
Beginner-friendlyBeanpole Boo Pumpkin Stencil
A surprised, ghost-like expression designed for very tall, skinny pumpkins: two long oval eyes stacked high, with a bigger gaping oval mouth below. All three ovals are pierced through, and the stretched proportions make the face look like it is mid gasp. This easy design works best when the ovals stay vertical and parallel, so lightly trace all three before cutting and check the alignment from a step back before you commit the knife.
Beginner-friendlyTiptoe Boo Ghost Pumpkin Stencil
Print the Tiptoe Boo Ghost pumpkin stencil with a numbered cutting pattern and step-by-step guide. Easy design; print at actual size.
AdvancedLittle Boo Pumpkin Stencil
A wide-eyed little ghost with curled hands and a wavy hem floats in front of a big round glow, its startled O-shaped mouth mid-boo. The circular background is cut through around the ghost, so the figure stays as connected rind while light floods the disc behind it. Those slim connector bridges at the hands and hem are the whole design; cut the large background sections first and save every bridge for careful final passes.
AdvancedGhost with BOO Balloon Pumpkin Stencil
A small ghost holds a round balloon with the word BOO written on it in this hard ghost pumpkin stencil, the balloon rendered as a thin open circle with letter cutouts and the ghost below it as a rounded blob with oval eyes and a wavy hemline. Both figures are outlined by thin curved lines that remain solid orange, so when lit the design shows glowing ribbons of light tracing the balloon string, the ghost body, and the BOO lettering. The string connecting the balloon to the ghost's hand is a single narrow line that must be cut last to keep the two halves of the stencil from shifting apart mid-carve.
AdvancedBOOO Starburst Pumpkin Stencil
A comic-book explosion pumpkin stencil spelling BOOO in large rounded block letters set inside a starburst burst shape, with spiky radiating points around the outside, scattered small five-pointed stars, and two short speed-line slashes shooting upward from the top. The burst background is carved through around the letters, making the BOOO lettering read as solid orange against a glowing field of light. Carve the jagged spike points of the burst last, working from the base of each spike outward to avoid snapping the sharp tips.
AdvancedBig Boo Burst Pumpkin Stencil
A speech-bubble pumpkin stencil showing a ragged, ghostly cloud shape with wispy frayed edges and the word BOO! set in loose, spooky handwritten-style lettering inside the bubble, plus a small speech tail pointing from the lower corner. The cloud outline and the letter interiors are carved through so the whole design glows as a single bright speech burst, while the letterform strokes remain as solid orange bridges. Cut the outer cloud perimeter first as one smooth outline, then open each letter space individually from the center outward to avoid buckling the thin cloud walls.





